On the Size, Shape and Spatial Distribution of Si Particles in A356 Castings After Single and Multiple Passes of Friction Stir Processing: The Effect of As-Cast Microstructures
Source abstract
Abstract
The relationship between as-cast and post-friction-stir-processed microstructures was assessed by a combination of quantitative metallography and statistical analysis. Two distinct as-cast microstructures, resulting from commercial and continuous casting processes, were subjected to multiple friction stir passes and subsequent metallography by SEM with EDS. X-ray maps were used to elucidate Si particles for quantitative image processing. Progressive homogenization with each successive pass was observed in both alloys. Continuously cast samples exhibited Si particle coarsening, while commercially cast alloys undergo Si particle refinement. Aspect ratio of particles remains constant throughout multiple FSP passes despite changes in spatial and particle size distribution. Trends in distributions of Si particle size and nearest neighbor distances with each pass are presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. R.S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, and A.K. Mukherjee: Scripta Mater. 1999, vol. 42, pp. 163–68.10.1016/S1359-6462(99)00329-2 ↗
2. R.S. Mishra and M.W. Mahoney, in Materials Science Forum, Trans Tech Publ, 2001, pp 507–14.10.4028/www.scientific.net/MSF.357-359.507 ↗
3. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R. Rep., 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
4. S. Jana, R.S. Mishra, and G. Grant: Friction Stir Casting Modification for Enhanced Structural Efficiency: A Volume in the Friction Stir Welding and Processing Book Series, Butterworth-Heinemann, 2015.10.1016/B978-0-12-802418-8.00014-X ↗
5. Z.Y. Ma: Metall. Mater. Trans. A., 2008, vol. 39, pp. 642–58.10.1007/s11661-007-9459-0 ↗
6. D. Yadav and R. Bauri: Mater. Sci. Eng. A., 2012, vol. 539, pp. 85–92.10.1016/j.msea.2012.01.055 ↗
7. M.S. Weglowski, P. Sedek, and C. Hamilton: Eng. Trans., 2016, vol. 64, pp. 301–9.
8. N. Sun and D. Apelian: in TMS 2012 141st Annual Meeting and Exhibition, Materials Properties, Characterization, and Modeling, Wiley, 2012, p. 411.10.1002/9781118357002.ch53 ↗
9. M.L. Santella, T. Engstrom, D. Storjohann, and T.Y. Pan: Scripta Mater., 2005, vol. 53, pp. 201–6.10.1016/j.scriptamat.2005.03.040 ↗
10. Z.Y. Ma, S.R. Sharma, and R.S. Mishra: Mater. Sci. Eng. A., 2006, vol. 433, pp. 269–78.10.1016/j.msea.2006.06.099 ↗
11. R. Kapoor, V. Sree Hari Rao, R.S. Mishra, J.A. Baumann, and G. Grant: Acta Mater., 2011, vol. 59, pp. 3447–62.10.1016/j.actamat.2011.02.019 ↗
12. S.R. Sharma, Z.Y. Ma, and R.S. Mishra: Scripta Mater., 2004, vol. 51, pp. 237–41.10.1016/j.scriptamat.2004.04.014 ↗
13. S.R. Sharma and R.S. Mishra: Scripta Mater., 2008, vol. 59, pp. 395–8.10.1016/j.scriptamat.2008.04.014 ↗
14. H.R. Ammar, A.M. Samuel, and F.H. Samuel: Int. J. Fatigue., 2008, vol. 30, pp. 1024–35.10.1016/j.ijfatigue.2007.08.012 ↗
15. S. Jana, R.S. Mishra, J.B. Baumann, and G. Grant: Acta Mater., 2010, vol. 58, pp. 989–1003.10.1016/j.actamat.2009.10.015 ↗
16. S. Jana, R.S. Mishra, J.B. Baumann, and G. Grant: Scripta Mater., 2009, vol. 61, pp. 992–5.10.1016/j.scriptamat.2009.08.011 ↗
17. N. Netto, M. Tiryakioğlu, and P.D. Eason: in Light Metals 2018. O. Martin, ed., Springer, Cham, 2018, pp. 417–22.10.1007/978-3-319-72284-9_56 ↗
18. Anon., ImageJ, https://imagej.nih.gov/ij/, 2021.
19. F.N. Rhines and M. Aballe: Metall. Mater. Trans. A., 1986, vol. 17A, pp. 2139–52.10.1007/BF02645912 ↗
20. M. Tiryakioğlu: Mater. Sci. Eng. A., 2008, vol. 473, pp. 1–6.10.1016/j.msea.2007.03.044 ↗
21. N.D. Alexopoulos, M. Tiryakioğlu, A.N. Vasilakos, and S.K. Kourkoulis: Mater. Sci. Eng. A., 2014, vol. 604, pp. 40–5.10.1016/j.msea.2014.02.084 ↗
22. T.W. Anderson and D.A. Darling: J. Am. Stat. Assoc., 1954, vol. 49, pp. 765–9.10.1080/01621459.1954.10501232 ↗
23. L.J. Baruch, R. Raju, V. Balasubramanian, A.G. Rao, and I. Dinaharan: Acta Metall. Sin. (Engl. Lett.)., 2016, vol. 29, pp. 431–40.10.1007/s40195-016-0405-2 ↗
24. R.T. DeHoff: Acta Metall. Mater., 1991, vol. 39, pp. 2349–60.10.1016/0956-7151(91)90016-T ↗
25. P.P. Bansal and A.J. Ardell: Metallography., 1972, vol. 5, pp. 97–111.10.1016/0026-0800(72)90048-1 ↗
26. M.O. Shabani, A. Mazahery, A. Bahmani, P. Davami, and N. Varahram: Kovove Mater., 2011, vol. 49, pp. 253–8.10.4149/km_2011_4_253 ↗
27. L.Y. Zhang, B.D. Zhou, Z.J. Zhan, Y.Z. Jia, S.F. Shan, B.Q. Zhang, and W.K. Wang: Mater. Sci. Eng. A., 2007, vol. 448, pp. 361–5.10.1016/j.msea.2006.10.025 ↗
28. C.N. Singman: J. Chem. Educ., 1984, vol. 61, p. 137.10.1021/ed061p137 ↗
29. D.J. Lloyd: Acta Metall. Mater., 1991, vol. 39, pp. 59–71.10.1016/0956-7151(91)90328-X ↗
30. M. Tiryakioğlu: Mater. Sci. Eng. A., 2006, vol. 427, pp. 154–9.10.1016/j.msea.2006.04.011 ↗
31. Q.G. Wang and C.H. Cáceres: Mater. Sci. Eng. A., 1997, vol. 234–236, pp. 106–9.10.1016/S0921-5093(97)00207-4 ↗