Determining Drag Coefficient of Simplified Dendritic Particles in Metallurgical Systems
Source abstract
Abstract
Study of drag force on dendritic particles in highly viscous fluids is essential for understanding the dynamic sinking/floating behavior of particles in metallurgical systems. In this study, experiments were carried out to investigate the drag coefficient of simplified three-dimensional dendritic particles in silicone oil with a range of viscosities (20, 100 and 500 cSt). The experimental system was designed to represent the basic oxygen steelmaking (BOS) slag system based on a dynamic similarity approach. The drag coefficient of each dendritic particle was calculated from the measured terminal velocity based on a force balance and the known drag coefficient of its volume equivalent sphere. The drag coefficients were determined over a range of Reynolds numbers (~ 0.035 to 84) differing by two orders of magnitude accounting for various particle shape factors that included aspect ratio, sphericity, and particle orientation. Correlations between the drag coefficient and the shape factors were proposed for each viscosity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Rheology and Fluid Dynamics Studies · Granular flow and fluidized beds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. H. Ono, A. Inagaki, T. Masui, H. Narita, S. Nosaka, T. Mitsuo, and S. Gohda: Trans. Iron Steel Inst. Jpn., 1981, vol. 21, pp. 135–44.10.2355/isijinternational1966.21.135 ↗
2. R. Zakhem, P.D. Weidman, and H. De Groh: Metall. Trans. A., 1992, vol. 23, pp. 2169–81.10.1007/BF02646010 ↗
3. H. Combeau, M. Založnik, S. Hans, and P.E. Richy: Metall. Mater. Trans. B., 2009, vol. 40, pp. 289–304.10.1007/s11663-008-9178-y ↗
4. H. De Groh and V. Laxmanan: in Solidification Processing of Eutectic Alloys, G. A. DM Stefanescu, and PJ Bayuzick, eds., Metallurgical Society, Warrendale PA, 1988, pp. 229–42.
5. H. De Groh, P. Weidman, R. Zakhem, S. Ahuja, and C. Beckermann: Metall. Trans. B., 1993, vol. 24, pp. 749–53.10.1007/BF02663135 ↗
6. L. Heyvaert, M. Bedel, M. Založnik, and H. Combeau: Metall. Mater. Trans. A., 2017, vol. 48, pp. 4713–34.10.1007/s11661-017-4238-z ↗
7. M. Wu, A. Fjeld, and A. Ludwig: Comput. Mater. Sci., 2010, vol. 50, pp. 32–42.10.1016/j.commatsci.2010.07.005 ↗
8. M.E. Glicksman: Principles of Solidification: An Introduction to Modern Casting and Crystal Growth Concepts. Springer, New York, 2010.
9. P. Southgate: JOM., 1957, vol. 9, pp. 514–7.10.1007/BF03397910 ↗
10. R. Southin: Trans. Met. Soc. AIME., 1968, vol. 242, pp. 2240–1.
11. C. Beckermann: JOM., 1997, vol. 49, pp. 13–7.10.1007/BF02914649 ↗
12. W.U. Mirihanage and D.J. Browne: Comput. Mater. Sci., 2010, vol. 50, pp. 260–7.10.1016/j.commatsci.2010.08.013 ↗
13. M. Stefan-Kharicha, A. Kharicha, M. Wu, and A. Ludwig: Metall. Mater. Trans. A., 2018, vol. 49, pp. 1708–24.10.1007/s11661-018-4489-3 ↗
14. G. Batchelor: J. Fluid Mech., 1970, vol. 44, pp. 419–40.10.1017/S002211207000191X ↗
15. A. Haider and O. Levenspiel: Powder Technol., 1989, vol. 58, pp. 63–70.10.1016/0032-5910(89)80008-7 ↗
16. G.V. Madhav and R. Chhabra: Int. J. Miner. Process., 1995, vol. 43, pp. 15–29.10.1016/0301-7516(94)00038-2 ↗
17. A. Hölzer and M. Sommerfeld: Powder Technol., 2008, vol. 184, pp. 361–5.10.1016/j.powtec.2007.08.021 ↗
18. T.-J. Chang and B.C. Yen: J. Eng. Mech., 1998, vol. 124, pp. 1193–8.10.1061/(ASCE)0733-9399(1998)124:11(1193) ↗
19. J. Jang and A. Hellawell: Ironmak. Steelmak., 1991, vol. 18, pp. 275–83.
20. T. Nguyen, S. Mitra, G. Evans, B.J. Monaghan, P. Zulli, K.-O. Jang, D. O’Dea, and T. Honeyands: ISIJ Int., 2021, vol. 61, pp. 705–14.10.2355/isijinternational.ISIJINT-2020-450 ↗
21. K. Mills and S. Sridhar: Ironmak. Steelmak., 1999, vol. 26, pp. 262–8.10.1179/030192399677121 ↗
22. L. Rao, Y. Dong, M. Gui, Y. Zhang, X. Shen, X. Wu, and F. Cao: Materials., 2020, vol. 13, p. 203.10.3390/ma13010203 ↗
23. S.-Y. Kitamura: ISIJ Int., 2017, vol. 57, pp. 1670–6.10.2355/isijinternational.ISIJINT-2017-109 ↗
24. N. Maruoka, A. Ishikawa, H. Shibata, and S.-Y. Kitamura: High Temp. Mater. Process., 2013, vol. 32, pp. 15–24.10.1515/htmp-2012-0049 ↗
25. K. Mills, L. Yuan, and R. Jones: J. S. Afr. Inst. Min. Metall., 2011, vol. 111, pp. 649–58.
26. R. Pietruck;, M. Magnusson;, H. Schmid; and M. Lindvall: PSP-BOF – Removal of phosphorus from BOF slag, Vol. (2016).
27. S. Atlas: Verlag Stahleisen GmbH: Düsseldorf, 1995.
28. T. Nguyen, S. Mitra, M. Sathe, V. Pareek, J.B. Joshi, and G.M. Evans: Exp. Thermal Fluid Sci., 2018, vol. 91, pp. 329–44.10.1016/j.expthermflusci.2017.10.025 ↗
29. Y. Fan and K. Wang: AICHE J., 2011, vol. 57, pp. 3299–304.10.1002/aic.12535 ↗
30. R. Mei: J. Fluid Mech., 1994, vol. 270, pp. 277–96.10.1017/S0022112094004222 ↗
31. R. Mei and R.J. Adrian: J. Fluid Mech., 1992, vol. 237, pp. 323–41.10.1017/S0022112092003434 ↗
32. R. Mei, C.J. Lawrence, and R.J. Adrian: J. Fluid Mech., 1991, vol. 233, pp. 613–31.10.1017/S0022112091000629 ↗
33. A. Syrakos, Y. Dimakopoulos, and J. Tsamopoulos: Phys. Fluids., 2018, vol. 30, p. 030708.10.1063/1.5011755 ↗
34. Z. Kőkuti, K. van Gruijthuijsen, M. Jenei, G. Toth-Molnar, A. Czirjak, J. Kokavecz, P. Ailer, L. Palkovics, A. Völker, and G. Szabo: Appl. Rheol., 2014, vol. 24, pp. 32–38.
35. R. Clift, J.R. Grace, and M.E. Weber: Bubbles, Drops, and Particles, Dover Publications Inc, New York, 2005, p. 381.
36. M. Holz, S.R. Heil, and A. Sacco: PCCP., 2000, vol. 2, pp. 4740–42.10.1039/b005319h ↗
37. B. Munson, D. Young, T. Okiishi, and W. Huebsch: Fundamentals of Fluid Mechanics. 6th ed. Wiley, Hoboken, 2009, p. 501.
38. R. Chhabra, L. Agarwal, and N.K. Sinha: Powder Technol., 1999, vol. 101, pp. 288–95.10.1016/S0032-5910(98)00178-8 ↗