Three-Phase Eutectic Microstructures: Influence of Interfacial Energy Anisotropy and Solute Diffusivities
Source abstract
Abstract
In this paper, we study three dimensional microstructural evolution in a symmetric ternary three-phase eutectic alloy using phase-field simulations under directional solidification conditions. While previous studies have explored the influence of volume fractions, difference in solid-liquid interfacial energies, velocity changes, etc. on the microstructural evolution, in this paper we deal with two unexplored fundamental aspects, namely the influence of solid-solid interfacial energy anisotropy as well as the disparity in the solute diffusivities in the liquid phase on three-phase microstructure formation. We begin by comparing the undercooling vs spacing variations for different steady state microstructures like the three-fibrous (hexagonal), brick-type and lamellar morphology under symmetric conditions and estimate the stability limits for each of the patterns for spacing variations. Thereafter, we investigate the transformation of the three-fibrous (hexagonal) arrangement to lower symmetry patterns upon imposition of anisotropy in the solid-solid interfacial energy as well as a solutal diffusivity contrast in the liquid. These simulations in constrained settings provide insights about the possible mechanisms of morphological transition and reveal steady state patterns that emerge under the individual and combined asymmetries arising due to anisotropy in solid-solid interfacial energy as well as disparate solute diffusivities. Subsequently, we perform extended simulations from random initial conditions for investigating morphology selection, and quantitative parameters like the interface length between the solid phases, number and spatial distribution of fibers are utilized to characterize and understand the morphologies. The simulation study reveals that diverse microstructures similar to reported experimental observations are obtained by varying just the interfacial energy anisotropy and the diffusivity matrix, even when each of the eutectic solid phases is at an equal one-third volume fraction. Thus, assessing the strength and form of anisotropy in the solid-solid interfaces as well as the diffusivity matrices are critical to the investigation of microstructural evolution during eutectic growth in multicomponent alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. U. Hecht, L. Gránásy, T. Pusztai, B. Böttger, M. Apel, V. Witusiewicz, L. Ratke, J. De Wilde, L. Froyen, D. Camel, et al.: Materials Science and Engineering: R: Reports 2004, vol. 46 (1-2), pp. 1–49.10.1016/j.mser.2004.07.002 ↗
2. W. Kurz, D.J. Fisher: Fundamentals of Solidification: Trans Tech Publications, vol 1. Aedermannsdorf, Switzerland, 1986
3. R. Elliott: Eutectic solidification processing: crystalline and glassy alloys. Elsevier, Amsterdam (2013)
4. J.A. Dantzig, M. Rappaz: Solidification. EPFL press, Lausanne (2009)10.1201/9781439808030 ↗
5. B. Nestler, A. Choudhury: Current opinion in solid state and Materials Science 2011, vol. 15 (3), pp. 93–105.10.1016/j.cossms.2011.01.003 ↗
6. K. A. Jackson, J. D. Hunt: Transactions of The Metallurgical Society of AIME 1966, vol. 236, pp. 1129–1142.
7. A. Parisi, M. Plapp: . Lett. vol. 90(2), p. 26010 (2010)10.1209/0295-5075/90/26010 ↗
8. M. Şerefoğlu, R. E. Napolitano, M. Plapp: Physical Review E 2011, vol. 84 (1), 011614.10.1103/PhysRevE.84.011614 ↗
9. S. Liu, J. Lee, R. Trivedi: Acta Materialia 2011, vol. 59 (8), pp. 3102–3115.10.1016/j.actamat.2011.01.050 ↗
10. V. Witusiewicz, U. Hecht, S. Rex: Acta materialia 2014, vol. 65, pp. 360–372.10.1016/j.actamat.2013.11.004 ↗
11. V. Witusiewicz, U. Hecht, J. Fernandez, J. Rodriguez, J. Ezquerro, Acta Materialia 203, 116469 (2021)10.1016/j.actamat.2020.11.011 ↗
12. M. Şerefolu, S. Bottin-Rousseau, S. Akamatsu, G. Faivre, IOP Conference Series: Materials Science and Engineering 27(1), 012030 (2012)10.1088/1757-899X/27/1/012030 ↗
13. M. Serefoglu, R. Napolitano: Acta materialia 2008, vol. 56 (15), pp. 3862–3873.10.1016/j.actamat.2008.02.050 ↗
14. S. Akamatsu, S. Bottin-Rousseau, M. Şerefoğlu, G. Faivre: Acta Materialia 2012, vol. 60 (6-7), pp. 3206–3214.10.1016/j.actamat.2012.02.033 ↗
15. S. Akamatsu, S. Bottin-Rousseau, M. Şerefoğlu, G. Faivre: Acta Materialia 2012, vol. 60 (6-7), pp. 3199–3205.10.1016/j.actamat.2012.02.031 ↗
16. S. Akamatsu, S. Bottin-Rousseau, G. Faivre, S. Ghosh, M. Plapp: IOP Conference Series: Materials Science and Engineering 2015, vol. 84 (1), pp. 012-.10.1088/1757-899X/84/1/012083 ↗
17. S. Akamatsu, M. Plapp: Current Opinion in Solid State and Materials Science 2016, vol. 20 (1), pp. 46–54.10.1016/j.cossms.2015.10.002 ↗
18. S. Ghosh, M. Plapp: Acta Materialia 2017, vol. 140, pp. 140–148.10.1016/j.actamat.2017.08.023 ↗
19. L. Rátkai, G. I. Tóth, L. Környei, T. Pusztai, L. Gránásy: Journal of Materials Science 2017, vol. 52 (10), pp. 5544–5558.10.1007/s10853-017-0853-8 ↗
20. S. K. Aramanda, S. Khanna, S. K. Salapaka, K. Chattopadhyay, A. Choudhury: Metallurgical and Materials Transactions A 2020, vol. 51A (12), pp. 6387–6405.10.1007/s11661-020-06007-5 ↗
21. S. Khanna, S. K. Aramanda, A. Choudhury: Metall. Mater. Trans. A 2020, vol. 51A (12), pp. 6327–6345.10.1007/s11661-020-05995-8 ↗
22. S. K. Aramanda, S. K. Salapaka, S. Khanna, K. Chattopadhyay, A. Choudhury: Acta Materialia 2020, vol. 197, pp. 108–121.10.1016/j.actamat.2020.07.036 ↗
23. D. McCartney, J. Hunt, R. Jordan: Metallurgical Transactions A 1980, vol. 11 (8), pp. 1243–1249.10.1007/BF02653477 ↗
24. D. McCartney, R. Jordan, J. Hunt: Metallurgical Transactions A 1980, vol. 11 (8), pp. 1251–1257.10.1007/BF02653478 ↗
25. U. Böyük, N. Maraşlı, H. Kaya, E. Çadırlı, K. Keşlioğlu: Applied Physics A 2009, vol. 95 (3), pp. 923–932.10.1007/s00339-009-5130-5 ↗
26. A. Dennstedt, L. Ratke: Transactions of the Indian Institute of Metals 2012, vol. 65 (6), pp. 777–782.10.1007/s12666-012-0172-3 ↗
27. A. Dennstedt, L. Helfen, P. Steinmetz, B. Nestler, L. Ratke: Metallurgical and Materials Transactions A 2016, vol. 47A (3), pp. 981–984.10.1007/s11661-015-3294-5 ↗
28. P. Steinmetz, J. Hötzer, M. Kellner, A. Genau, B. Nestler: Computational Materials Science 2018, vol. 148, pp. 131–140.10.1016/j.commatsci.2018.02.040 ↗
29. S. Rex, B. Böttger, V. Witusiewicz, U. Hecht: Materials Science and Engineering: A 2005, vol. 413, pp. 249–254.10.1016/j.msea.2005.09.019 ↗
30. V. Witusiewicz, U. Hecht, S. Rex, M. Apel: Acta materialia 2005, vol. 53 (13), pp. 3663–3669.10.1016/j.actamat.2005.04.015 ↗
31. S. Bottin-Rousseau, M. Şerefoğlu, S. Yücetürk, G. Faivre, S. Akamatsu: Acta Materialia 2016, vol. 109, pp. 259–266.10.1016/j.actamat.2016.01.065 ↗
32. S. Mohagheghi, M. Şerefoğlu: Journal of Crystal Growth 2017, vol. 470, pp. 66–74.10.1016/j.jcrysgro.2017.04.008 ↗
33. S. Mohagheghi, M. Şerefoğlu: Acta Materialia 2018, vol. 151, pp. 432–442.10.1016/j.actamat.2018.03.019 ↗
34. S. Mohagheghi, U. Hecht, S. Bottin-Rousseau, S. Akamatsu, G. Faivre, M. Şerefoğlu: IOP Conference Series: Materials Science and Engineering 2019, vol. 529 (1), pp. 012-.10.1088/1757-899X/529/1/012010 ↗
35. U. Böyük, N. Maraşlı: Journal of alloys and compounds 2009, vol. 485 (1-2), pp. 264–269.10.1016/j.jallcom.2009.06.067 ↗
36. D. Lewis, S. Allen, M. Notis, A. Scotch: Journal of electronic materials 2002, vol. 31 (2), pp. 161–167.10.1007/s11664-002-0163-y ↗
37. M. Ruggiero, J. Rutter: Materials science and technology 1997, vol. 13 (1), pp. 5–11.10.1179/mst.1997.13.1.5 ↗
38. T. Himemiya, T. Umeda, Materials Transactions. JIM 40(7), 665–674 (1999)10.2320/matertrans1989.40.665 ↗
39. A. Choudhury, M. Plapp, B. Nestler: Physical Review E 2011, vol. 83 (5), pp. 051-.10.1103/PhysRevE.83.051608 ↗
40. P. Steinmetz, J. Hötzer, M. Kellner, A. Dennstedt, B. Nestler: Computational Materials Science 2016, vol. 117, pp. 205–214.10.1016/j.commatsci.2016.02.001 ↗
41. A. Choudhury: Transactions of the Indian Institute of Metals 2015, vol. 68 (6), pp. 1137–1143.10.1007/s12666-015-0659-9 ↗
42. A. Choudhury, Y. C. Yabansu, S. R. Kalidindi, A. Dennstedt: Acta Materialia 2016, vol. 110, pp. 131–141.10.1016/j.actamat.2016.03.010 ↗
43. P. Steinmetz, M. Kellner, J. Hötzer, A. Dennstedt, B. Nestler: Computational Materials Science 2016, vol. 121, pp. 6–13.10.1016/j.commatsci.2016.04.025 ↗
44. J. Hötzer, P. Steinmetz, A. Dennstedt, A. Genau, M. Kellner, I. Sargin, B. Nestler: Acta Materialia 2017, vol. 136, pp. 335–346.10.1016/j.actamat.2017.07.007 ↗
45. P. Steinmetz, M. Kellner, J. Hötzer, B. Nestler: Metallurgical and Materials Transactions B 2018, vol. 49 (1), pp. 213–224.10.1007/s11663-017-1142-2 ↗
46. A. Genau, L. Ratke: International journal of materials research 2012, vol. 103 (4), pp. 469–475.10.3139/146.110652 ↗
47. A. Dennstedt, L. Ratke, A. Choudhury, B. Nestler, Metallography. Microstructure, and Analysis 2(3), 140–147 (2013)10.1007/s13632-013-0072-x ↗
48. P. Steinmetz, Y. C. Yabansu, J. Hötzer, M. Jainta, B. Nestler, S. R. Kalidindi: Acta Materialia 2016, vol. 103, pp. 192–203.10.1016/j.actamat.2015.09.047 ↗
49. Y. C. Yabansu, P. Steinmetz, J. Hötzer, S. R. Kalidindi, B. Nestler: Acta Materialia 2017, vol. 124, pp. 182–194.10.1016/j.actamat.2016.10.071 ↗
50. P. Steinmetz, J. Hötzer, A. Dennstedt, C. Serr, B. Nestler, A. Genau: Journal of Crystal Growth 2018, vol. 498, pp. 230–243.10.1016/j.jcrysgro.2018.06.028 ↗
51. F. Kaka, S. Khanna, P. Ramamurthy, A. Choudhury: Journal of Applied Physics 2020, vol. 128 (14), pp. 145-.10.1063/5.0020863 ↗
52. D. B. Brough, D. Wheeler, S. R. Kalidindi: Integrating materials and manufacturing innovation 2017, vol. 6 (1), pp. 36–53.10.1007/s40192-017-0089-0 ↗
53. G. A. Chadwick: Progress in materials science 1963, vol. 12, pp. 99–182.10.1016/0079-6425(63)90037-9 ↗
54. D. Jaffrey, G. Chadwick: Metallurgical Transactions 1970, vol. 1 (12), pp. 3389–3396.10.1007/BF03037869 ↗
55. B. Caroli, C. Caroli, G. Faivre, J. Mergy: Journal of crystal growth, vol. 118, p. 135 (1992)10.1016/0022-0248(92)90058-Q ↗
56. A. Valance, C. Misbah, D. Temkin, K. Kassner: Physical Review E, vol. 48, p. 1924 (1993)10.1103/PhysRevE.48.1924 ↗
57. S. Bottin-Rousseau, M. Şerefolu, S. Akamatsu, G. Faivre: IOP Conference Series: Materials Science and Engineering 2012, vol. 27 (1), pp. 012-.10.1088/1757-899X/27/1/012088 ↗
58. S. Ghosh, A. Choudhury, M. Plapp, S. Bottin-Rousseau, G. Faivre, S. Akamatsu: Physical Review E 2015, vol. 91 (2), pp. 022-.10.1103/PhysRevE.91.022407 ↗
59. P. Steinmetz, A. Dennstedt, M. Şerefoğlu, I. Sargin, A. Genau, U. Hecht: Acta Materialia 2018, vol. 157, pp. 96–105.10.1016/j.actamat.2018.07.016 ↗
60. A. Lahiri, A. Choudhury: Acta Materialia 2017, vol. 133, pp. 316–332.10.1016/j.actamat.2017.05.047 ↗
61. A. Choudhury, B. Nestler: Physical Review E 2012, vol. 85 (2), pp. 021-.10.1103/PhysRevE.85.021602 ↗
62. M. Plapp: Physical Review E 2011, vol. 84 (3), pp. 031601-.10.1103/PhysRevE.84.031601 ↗
63. M. Bauer, J. Hötzer, M. Jainta, P. Steinmetz, M. Berghoff, F. Schornbaum, C. Godenschwager, H. Köstler, B. Nestler, U. Rüde. Massively parallel phase-field simulations for ternary eutectic directional solidification: in: Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis, 2015, pp. 1–1210.1145/2807591.2807662 ↗
64. A. Choudhury: Quantitative Phase-Field Model for Phase Transformations in Multi-component Alloys, vol. Band 21: KIT Scientific Publishing, 2012
65. A. Choudhury, M. Kellner, B. Nestler: Current Opinion in Solid State and Materials Science 2015, vol. 19 (5), pp. 287–300.10.1016/j.cossms.2015.03.003 ↗
66. A. Vondrous, M. Selzer, J. Hötzer, B. Nestler, The. International Journal of High Performance Computing Applications 28(1), 61–72 (2014)10.1177/1094342013490972 ↗
67. R. Folch, M. Plapp: Physical Review E 2005, vol. 72 (1), pp. 011-.10.1103/PhysRevE.72.011602 ↗
68. A. J. Shahani, X. Xiao, E. M. Lauridsen, P. W. Voorhees: Materials Research Letters 2020, vol. 8 (12), pp. 462–476.10.1080/21663831.2020.1809544 ↗