journal article·2021-07

In Vitro Corrosion Anisotropy Assessment of Ti6Al4V Bimodal Microstructure due to Crystallographic Texture

Mohabbat Amirnejad, Mohammad Rajabi, Roohollah Jamaati

Publisher page

Abstract

The effect of crystallographic texture on the corrosion performance of the Ti6Al4V alloy with a typical bimodal microstructure has been studied on three orthogonal surfaces of the rectangular sample. The optical microscopy (OM) and scanning electron microscopy (SEM) observations revealed that the same microstructure is developed on three surfaces via heat treatment. The crystallographic planes, which are located in parallel to each surface, have been evaluated through macrotexture analysis. The electrochemical measurements showed that the RD-ND surface (i.e., surface normal to transverse direction), in which $$ \left\{ { 0 0 0 2} \right\} $$ and $$ \{ 11\bar{2}0\} $$ crystallographic planes are placed in parallel to the surface, has the lowest corrosion rate equal to 2.2 × 10−5 mm/year. In contrast, the corrosion rate of the TD-ND surface, which is normal to the rolling direction, with $$ \left\{ { 1 0\bar{1} 0} \right\} $$ planes in parallel to the surface is ~ 15 times greater than that of the RD-TD surface. Electrochemical impedance spectroscopy (EIS) results showed that the greater corrosion resistance of different surfaces is mainly dependent on the passive layer properties formed on each surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. A. Pandey, A. Awasthi, and K.K. Saxena: Adv. Mater. Process. Technol., 2020, vol. 00, pp. 1–36.
2. R.I.M. Asri, W.S.W. Harun, M. Samykano, N.A.C. Lah, S.A.C. Ghani, F. Tarlochan, and M.R. Raza: Mater. Sci. Eng. C, 2017, vol. 77, pp. 1261–74.10.1016/j.msec.2017.04.102 ↗
3. Y. Ito, N. Hoshi, T. Hayakawa, C. Ohkubo, H. Miura, and K. Kimoto: Mater. Sci. Eng. B, 2019, vol. 245, pp. 30–6.10.1016/j.mseb.2019.05.002 ↗
4. C. Xia, D. Cai, J. Tan, K. Li, Y. Qiao, and X. Liu: ACS Biomater. Sci. Eng., 2018, vol. 4, pp. 3185–93.10.1021/acsbiomaterials.8b00501 ↗
5. M. Geetha, A.K. Singh, R. Asokamani, and A.K. Gogia: Prog. Mater. Sci., 2009, vol. 54, pp 397-42510.1016/j.pmatsci.2008.06.004 ↗
6. S. Bose, L.C. Pathak, and R. Singh: Appl. Surf. Sci., 2018, vol. 433, pp. 1158–74.10.1016/j.apsusc.2017.09.223 ↗
7. O.S. Adesina, B.A. Obadele, G.A. Farotade, D.A. Isadare, A.A. Adediran, and P.P. Ikubanni: J. Alloys Compd., 2020, vol. 827, p. 154245.10.1016/j.jallcom.2020.154245 ↗
8. M.M.M. López, J. Fauré, M.I.E. Cabrera, and M.E.C. García: Mater. Sci. Eng. B, 2016, vol. 206, pp. 30–38.10.1016/j.mseb.2015.09.003 ↗
9. M. Fazel, H.R. Salimijazi, and M. Shamanian: ACS Appl. Mater. Interfaces, 2018, vol. 10, pp. 15281–7.10.1021/acsami.8b02331 ↗
10. L. Benea, A. Ravoiu, and J.P. Celis: ACS Biomater. Sci. Eng., 2019, vol. 5, pp. 5925–34.10.1021/acsbiomaterials.9b00626 ↗
11. D.P. Perl and S. Moalem: J. Alzheimer’s Dis. 2006, vol. 9, pp. 291–300.10.3233/JAD-2006-9S332 ↗
12. M.-J. Hosseini, F. Shaki, M. Ghazi-Khansari, and J. Pourahmad: Metallomics, 2013, vol. 5, pp. 152–66.10.1039/c2mt20198d ↗
13. G.C. Mckay, R. Macnair, C. Macdonald, and M.H. Grant: Biomaterials, 1996; 17:1339-44.10.1016/S0142-9612(96)80012-3 ↗
14. M. Matsuo, S. Suwas, and R.K. Ray: Crystallographic Texture of Materials, Springer, New York, 2014.
15. V.A. Popovich, E. V. Borisov, A.A. Popovich, V.S. Sufiiarov, D. V. Masaylo, and L. Alzina: Mater. Des., 2017, vol. 114, pp. 441–9.10.1016/j.matdes.2016.10.075 ↗
16. C.Q. Li, D.K. Xu, S. Yu, L.Y. Sheng, and E.H. Han: J. Mater. Sci. Technol., 2017, vol. 33, pp. 475–80.10.1016/j.jmst.2016.10.003 ↗
17. A. Amininejad, R. Jamaati, and S.J. Hosseinipour: Mater. Sci. Eng. A, 2019, vol. 767, p. 138433.10.1016/j.msea.2019.138433 ↗
18. X. Ren, Y. Huang, and Y. Liu: J. Mater. Eng. Perform., 2018, vol. 27, pp. 3932–9.10.1007/s11665-018-3486-4 ↗
19. F. Briffod, A. Bleuset, T. Shiraiwa, and M. Enoki: Acta Mater., 2019, vol. 177, pp. 56–67.10.1016/j.actamat.2019.07.025 ↗
20. W. Zhang, L. Tan, D. Ni, J. Chen, Y.C. Zhao, L. Liu, C. Shuai, K. Yang, A. Atrens, and M.C. Zhao: J. Mater. Sci. Technol., 2019, vol. 35, pp. 777–83.10.1016/j.jmst.2018.11.025 ↗
21. J. Fu, F. Li, J. Sun, K. Cui, X. Du, and Y. Wu: J. Electroanal. Chem., 2019, vol. 841, pp. 56–62.10.1016/j.jelechem.2019.04.031 ↗
22. É. Martin, M. Azzi, G.A. Salishchev, and J. Szpunar: Tribol. Int., 2010, vol. 43, pp. 918–24.10.1016/j.triboint.2009.12.055 ↗
23. S. Bahl, P.L. Nithilaksh, S. Suwas, S. V. Kailas, and K. Chatterjee: J. Mater. Eng. Perform., 2017, vol. 26, pp. 4206–16.10.1007/s11665-017-2865-6 ↗
24. M. Amirnejad, M. Rajabi, and R. Jamaati: Corros. Sci., 2021, vol. 179, p. 109100.10.1016/j.corsci.2020.109100 ↗
25. Z.X. Zhang, S.J. Qu, A.H. Feng, X. Hu, and J. Shen: J. Alloys Compd., 2019, vol. 773, pp. 277–87.10.1016/j.jallcom.2018.09.220 ↗
26. J. Zhang, X. Li, D. Xu, and R. Yang: Prog. Nat. Sci. Mater. Int., 2019, vol. 29, pp. 295–304.10.1016/j.pnsc.2019.05.006 ↗
27. M. Villa, J.W. Brooks, R.P. Turner, H. Wang, F. Boitout, and R.M. Ward: Metall. Mater. Trans. B, 2019, vol. 50, pp. 2898–911.10.1007/s11663-019-01675-0 ↗
28. N. Stanford and P.S. Bate: Acta Mater., 2004, vol. 52, pp. 5215–24.10.1016/j.actamat.2004.07.034 ↗
29. W. Kou, Q. Sun, L. Xiao, and J. Sun: J. Alloys Compd., 2020, vol. 820, p. 153421.
30. W. Simka, A. Sadkowski, M. Warczak, A. Iwaniak, G. Dercz, J. Michalska, and A. MacIej: Electrochim. Acta, 2011, vol. 56, pp. 8962–8.10.1016/j.electacta.2011.07.129 ↗
31. X. Gai, Y. Bai, J. Li, S. Li, W. Hou, Y. Hao, X. Zhang, R. Yang, and R.D.K. Misra: Corros. Sci., 2018, vol. 145, pp. 80–9.10.1016/j.corsci.2018.09.010 ↗
32. I. Milošev, T. Kosec, and H.H. Strehblow: Electrochim. Acta, 2008, vol. 53, pp. 3547–58.10.1016/j.electacta.2007.12.041 ↗
33. L. Wang, H. Yu, K. Wang, H. Xu, S. Wang, and D. Sun: ACS Appl. Mater. Interfaces, 2016, vol. 8, pp. 18608–19.10.1021/acsami.6b05080 ↗
34. A.C. Hee, S.S. Jamali, A. Bendavid, P.J. Martin, C. Kong, and Y. Zhao: Surf. Coatings Technol., 2016, vol. 307, pp. 666–75.10.1016/j.surfcoat.2016.09.061 ↗
35. G. ASTM, G102, and G. ASTM: G102-89, ASTM Int. West Conshohocken, 2004, vol. 89, pp. 1–7.
36. A.C. Alves, F. Wenger, P. Ponthiaux, J.P. Celis, A.M. Pinto, L.A. Rocha, and J.C.S. Fernandes: Electrochim. Acta, 2017, vol. 234, pp. 16–27.10.1016/j.electacta.2017.03.011 ↗
37. C.T. Kwok, P.K. Wong, F.T. Cheng, and H.C. Man: Appl. Surf. Sci., 2009, vol. 255, pp. 6736–44.10.1016/j.apsusc.2009.02.086 ↗
38. H.A. Videla: Manual of Biocorrosion, CRC Press, Boca Raton, 1996.
39. D.J. Blackwood: Electrochim. Acta, 2000, vol. 46, pp. 563–9.10.1016/S0013-4686(00)00636-8 ↗
40. S. V. Gnedenkov and S.L. Sinebryukhov: Elektrokhimiya, 2005, vol. 41, pp. 963–71.
41. S.K. Poznyak, A.D. Lisenkov, M.G.S. Ferreira, A.I. Kulak, and M.L. Zheludkevich: Electrochim. Acta, 2012, vol. 76, pp. 453–61.10.1016/j.electacta.2012.05.064 ↗
42. P. Qin, Y. Chen, Y.J. Liu, J. Zhang, L.Y. Chen, Y. Li, X. Zhang, C. Cao, H. Sun, and L.C. Zhang: ACS Biomater. Sci. Eng., 2019, vol. 5:1141-49.10.1021/acsbiomaterials.8b01341 ↗
43. S. BenAoun, M. Bouklah, K.F. Khaled, and B. Hammouti: Int. J. Electrochem. Sci., 2016, vol. 11, pp. 7343–58.10.20964/2016.09.07 ↗
44. A. Wypych, I. Bobowska, M. Tracz, A. Opasinska, S. Kadlubowski, A. Krzywania-Kaliszewska, J. Grobelny, and P. Wojciechowski: J. Nanomater., 2014. Doi:10.1155/2014/124814.10.1155/2014/124814 ↗
45. M. Hoseini, A. Shahryari, S. Omanovic, and J.A. Szpunar: Corros. Sci., 2009, vol. 51, pp. 3064–7.10.1016/j.corsci.2009.08.017 ↗
46. G. Lütjering and J.C. Williams: Titanium, Springer, New York, 2007.
47. B. Pazhanivel, P. Sathiya, and G. Sozhan: Opt. Laser Technol., 2020,vol. 125, 10601710.1016/j.optlastec.2019.106017 ↗
48. C. Leyens and M. Peters: Titanium and Titanium Alloys: Fundamentals and Applications, Wiley, New York, 2003.10.1002/3527602119 ↗
49. H.G. Kim, T.H. Kim, and Y.H. Jeong: J. Nucl. Mater., 2002, vol. 306, pp. 44–53.10.1016/S0022-3115(02)01226-6 ↗
50. H.H. Wu, P. Wisesa, and D.R. Trinkle: Phys. Rev. B, 2016, vol. 94, pp. 1–7.
51. Y.H. Ho, S.S. Joshi, T.C. Wu, C.M. Hung, N.J. Ho, and N.B. Dahotre: Mater. Sci. Eng. C, 2020, vol. 109, p. 110632.
52. B.Q. Fu, W. Liu, and Z.L. Li: Appl. Surf. Sci., 2009, vol. 255, pp. 9348–57.10.1016/j.apsusc.2009.07.034 ↗
53. K.D. Ralston, N. Birbilis, and C.H.J.J. Davies: Scr. Mater., 2010, vol. 63, pp. 1201–4.10.1016/j.scriptamat.2010.08.035 ↗
54. W.T. Huo, L.Z. Zhao, W. Zhang, J.W. Lu, Y.Q. Zhao, and Y.S. Zhang: Mater. Sci. Eng. C, 2018, vol. 92, pp. 268–79.10.1016/j.msec.2018.06.061 ↗