Effect of Environment on the Work Hardening Behavior of AA 7004
Source abstract
Abstract
The influence of 3.5 wt pct NaCl on the work-hardening response of AA 7004 is investigated through subjecting the tensile data to Kock-Mecking analysis. Due to the exposure to chloride, the decay in the work-hardening rate (−dθ/dσ) increases by ~28 pct when the alloy has GP zones and decreases by ~22 pct when η′/η precipitates are present. In contrast, no significant variation in ultimate tensile strength and elongation values are observed for the alloy, although it suffered embrittlement which results in tearing topography surfaces. Accordingly, −dθ/dσ seems to be a more reliable parameter to assess the environmentally assisted cracking (EAC) susceptibility of the less EAC susceptible AA 7004.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. T. Dursun and C. Soutis: Mater. Des., 2014, vol. 56, pp. 862–71.10.1016/j.matdes.2013.12.002 ↗
2. M.O. Speidel: Metall. Trans. A, 1975, vol. 6, pp. 631–51.10.1007/BF02672284 ↗
3. S. Lynch: Eng. Fail. Anal., 2019, vol. 100, pp. 329–50.10.1016/j.engfailanal.2019.02.027 ↗
4. D.E. Davies, J.P. Dennison, and M.L. Mehta: Corrosion, 1971, vol. 27, pp. 371–75.10.5006/0010-9312-27.9.371 ↗
5. K. Sadananda, A.K. Vasudevan (2011) Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 42:279–9510.1007/s11661-010-0472-3 ↗
6. N.J. Holroyd and G.M. Scamans: Corrosion, 2016, vol. 9312, pp. 136–43.
7. A.K. Mukhopadhyay: Metall. Mater. Trans. A, 1997, vol. 28, pp. 11–13.10.1007/s11661-997-0200-9 ↗
8. S.P. Lynch and P. Trevena: Corrosion, 1988, vol. 44, pp. 113–24.10.5006/1.3583907 ↗
9. M. Bobby Kannan, V.S. Raja, R. Raman, A.K. Mukhopadhyay: Corrosion, 2003, vol. 59, pp. 881–89.10.5006/1.3287709 ↗
10. 10. M. BobbyKannan, V.S. Raja (2007) J. Mater. Sci. 42:5458–6410.1007/s10853-006-0784-2 ↗
11. S. Chen, J. Li, G. Hu, K. Chen, and L. Huang: J. Alloys Compd., 2018, vol. 757, pp. 259–64.10.1016/j.jallcom.2018.05.063 ↗
12. J.R. Pickens and T.J. Langan: Metall. Trans. A, 1987, vol. 18, pp. 1735–44.10.1007/BF02646205 ↗
13. S.P. Knight, N. Birbilis, B.C. Muddle, A.R. Trueman, and S.P. Lynch: Corros. Sci., 2010, vol. 52, pp. 4073–80.10.1016/j.corsci.2010.08.024 ↗
14. S.P. Knight, K. Pohl, N.J.H. Holroyd, N. Birbilis, P.A. Rometsch, B.C. Muddle, R. Goswami, and S.P. Lynch: Corros. Sci., 2015, vol. 98, pp. 50–62.10.1016/j.corsci.2015.05.016 ↗
15. M.A. Krishnan, V.S. Raja, S. Shukla, and S.M. Vaidya: Metall. Mater. Trans. A, 2018, vol. 49, pp. 2487–98.10.1007/s11661-018-4601-8 ↗
16. M.B. Kannan and V.S. Raja: Adv. Mater. Res., 2010, vol. 138, pp. 1–6.10.4028/www.scientific.net/AMR.138.1 ↗
17. M. Talianker and B. Cina: Metall. Trans. A, 1989, vol. 20, pp. 2087–92.10.1007/BF02650294 ↗
18. M. BobbyKannan, V.S. Raja (2010) Eng. Fract. Mech. 77: 249–5610.1016/j.engfracmech.2009.06.006 ↗
19. S.P. Lynch (2013) Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44: 1209–2910.1007/s11661-012-1359-2 ↗
20. D.A. Hardwick, A.W. Thompson, and I.M. Bernstein: Metall. Trans. A, 1983, vol. 14, pp. 2517–26.10.1007/BF02668893 ↗
21. D. Najjar, T. Magnin, and T.J. Warner: Mater. Sci. Eng. A, 1997, vol. 238, pp. 293–302.10.1016/S0921-5093(97)00369-9 ↗
22. X.Y. Sun, B. Zhang, H.Q. Lin, Y. Zhou, L. Sun, J.Q. Wang, E.H. Han, and W. Ke: Corros. Sci., 2014, vol. 79, pp. 1–4.10.1016/j.corsci.2013.10.027 ↗
23. X.Y. Sun, B. Zhang, H.Q. Lin, Y. Zhou, L. Sun, J.Q. Wang, E.H. Han, and W. Ke: Corros. Sci., 2013, vol. 77, pp. 103–12.10.1016/j.corsci.2013.07.032 ↗
24. R.G. Song, M.K. Tseng, B.J. Zhang, J. Liu, Z.H. Jin, and K.S. Shin: Acta Mater., 1996, vol. 44, pp. 3241–48.10.1016/1359-6454(95)00406-8 ↗
25. R.G. Song, W. Dietzel, B.J. Zhang, W.J. Liu, M.K. Tseng, and A. Atrens: Acta Mater., 2004, vol. 52, pp. 4727–43.10.1016/j.actamat.2004.06.023 ↗
26. N.J.H. Holroyd, G.M. Scamans (2013) Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44:1230–5310.1007/s11661-012-1528-3 ↗
27. M.B. Kannan and V.S. Raja: Adv. Mater. Sci., 2007, vol. 7, pp. 6–11.
28. M.A. Krishnan and V. Raja: Corros. Sci., 2019, vol. 152, pp. 211–17.10.1016/j.corsci.2019.03.004 ↗
29. M.A. Krishnan and V.S. Raja: Corros. Sci., 2015, vol. 109, pp. 94–100.10.1016/j.corsci.2016.03.025 ↗
30. I.M. Robertson, P. Sofronis, A. Nagao, M.L. Martin, S. Wang, D.W. Gross, and K.E. Nygren: Metall. Mater. Trans. A, 2015, vol. 46, pp. 2323–41.10.1007/s11661-015-2836-1 ↗
31. C.D. Beachem, C.M. Section, P. Metal-, and M. Division: Metall. Trans., 1972, vol. 3, pp. 437–51.10.1007/BF02642048 ↗
32. S. Wang, M.L. Martin, P. Sofronis, S. Ohnuki, N. Hashimoto, and I.M. Robertson: Acta Mater., 2014, vol. 69, pp. 275–82.10.1016/j.actamat.2014.01.060 ↗
33. K. Kim, J. Kang, and S. Kim: Corros. Sci., 2021, vol. 180, p. 109226.10.1016/j.corsci.2020.109226 ↗
34. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗
35. L.M. Cheng, W.J. Poole, J.D. Embury, and D.J. Lloyd: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2003–2473.10.1007/s11661-003-0007-2 ↗
36. Z.D. Harris, J.J. Bhattacharyya, J.A. Ronevich, S.R. Agnew, and J.T. Burns: Acta Mater., 2020, vol. 186, pp. 616–30.10.1016/j.actamat.2020.01.033 ↗
37. M. Dadfarnia, A. Nagao, S. Wang, M.L. Martin, B.P. Somerday, and P. Sofronis: Int. J. Fract., 2015, vol. 196, pp. 223–43.10.1007/s10704-015-0068-4 ↗
38. A. Azarniya, A. Karimi, and K. Karimi: J. Alloys Compd., 2019, vol. 781, pp. 945–83.10.1016/j.jallcom.2018.11.286 ↗
39. ASM International (2005) ASM Handbooks, Properties and Selection : Nonferrous Alloys and Special-Purpose Materials, vol. 2. ASM International, Cleveland
40. U. De Francisco, N.O. Larrosa, and M.J. Peel: Mater. Sci. Eng. A, 2019, vol. 772, p. 138662.10.1016/j.msea.2019.138662 ↗
41. J.W. Edington (1975) Practical Electron Microscopy in Materials Science. MacMillan Press Philips Technical Library, New York
42. L.. Berg, J. Gjønnes, V. Hansen, X.. Li, M. Knutson-Wedel, G. Waterloo, D. Schryvers, and L.. Wallenberg: Acta Mater., 2001, vol. 49, pp. 3443–51.10.1016/S1359-6454(01)00251-8 ↗
43. M. Nicolas and A. Deschamps: Acta Mater., 2003, vol. 51, pp. 6077–94.10.1016/S1359-6454(03)00429-4 ↗
44. A. Deschamps, G. Texier, S. Ringeval, and L. Delfaut-Durut: Mater. Sci. Eng. A, 2009, vol. 501, pp. 133–39.10.1016/j.msea.2008.09.067 ↗
45. YG Liao, XQ Han, MX Zeng, M. Jin (2015) Mater. Des. 66:581–8610.1016/j.matdes.2014.05.003 ↗
46. A. Deschamps, Y. Bréchet, and F. Livet: Mater. Sci. Technol., 1999, vol. 15, pp. 993–1000.10.1179/026708399101506832 ↗
47. S.-S. Wang, I.-W. Huang, L. Yang, J.-T. Jiang, J.-F. Chen, S.-L. Dai, D.N. Seidman, G.S. Frankel, and L. Zhen: J. Electrochem. Soc., 2015, vol. 162, pp. C150–60.10.1149/2.0301504jes ↗
48. N.Q. Chinh, J. Lendvai, D.H. Ping, and K. Hono: J. Alloys Compd., 2004, vol. 378, pp. 52–60.10.1016/j.jallcom.2003.11.175 ↗
49. H. Löffler, I. Kovacs, and J. Lendvai: J. Mater. Sci., 1983, vol. 18, pp. 2215–40.10.1007/BF00541825 ↗
50. M.D. Pustode, V.S. Raja, and N. Paulose: Corros. Sci., 2014, vol. 82, pp. 191–96.10.1016/j.corsci.2014.01.013 ↗
51. B.S. Padekar, V.S. Raja, R.K. SinghRaman, L. Paul (2011) Mater. Sci. Forum 690:361–6410.4028/www.scientific.net/MSF.690.361 ↗
52. U.F. Kocks: Metall. Trans., 1985, vol. 16, pp. 2109–29.10.1007/BF02670415 ↗
53. J.R. Scully, G.A. Young Jr., and S.W. Smith: Mater. Sci. Forum, 2000, vol. 331–337, pp. 1583–1600.10.4028/www.scientific.net/MSF.331-337.1583 ↗
54. G.A. Young Jr and J.R. Scully: Acta Mater., 1998, vol. 46, pp. 6337–49.10.1016/S1359-6454(98)00333-4 ↗
55. A.W. Thompson and J.C. Chesnutt: Metall. Trans. A, 1979, vol. 10, pp. 1193–96.10.1007/BF02811666 ↗
56. J. Chen, X. Zhang, L. Zou, Y. Yu, and Q. Li: Mater. Charact., 2016, vol. 114, pp. 1–8.10.1016/j.matchar.2016.01.022 ↗
57. C. Meng, D. Zhang, L. Zhuang, and J. Zhang: J. Alloys Compd., 2016, vol. 655, pp. 178–87.10.1016/j.jallcom.2015.09.159 ↗
58. M.B. Kannan, V.S. Raja, and A.K. Mukhopadhyay: Scr. Mater., 2004, vol. 51, pp. 1075–79.10.1016/j.scriptamat.2004.08.002 ↗
59. N.Y. Zolotorevsky, A.N. Solonin, A.Y. Churyumov, and V.S. Zolotorevsky: Mater. Sci. Eng. A, 2009, vol. 502, pp. 111–17.10.1016/j.msea.2008.10.010 ↗
60. S. Xu, D. McDowell, and I. Beyerlein: Acta Mater., 2019, vol. 174, pp. 160–72.10.1016/j.actamat.2019.05.030 ↗
61. J.R. Scully, G.A. Young Jr., S.W. Smith (2012) Gaseous Hydrogen Enmbrittlement of Materials in Energy Technologies. Woodhead Publishing Ltd., Swashton
62. A.K. Vasudevan, K. Sadananda (2011) Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 42:. 405–1410.1007/s11661-010-0471-4 ↗
63. M.L. Martin, M. Dadfarnia, A. Nagao, S. Wang, and P. Sofronis: Acta Mater., 2019, vol. 165, pp. 734–50.10.1016/j.actamat.2018.12.014 ↗
64. Z. Tarzimoghadam, D. Ponge, J. Klower, and D. Raabe: Acta Mater., 2017, vol. 128, pp. 365–74.10.1016/j.actamat.2017.02.059 ↗