journal article·2019-12Open access

About Equilibrium Mode Ruling Ferritic Transformation in Low-Alloy SGI

Laura Noel García, Fernando Diego Carazo, Roberto Enrique Boeri

Abstract

Ferrite precipitating around the graphite nodules shaping the typical bull’s-eye microstructure could grow under negligible partitioning local equilibrium or under paraequilibrium conditions, as both imply that ferrite inherits the composition of the parent austenite. The first mechanism has been rejected by other researchers by means of simple calculations of the silicon spike width necessary for local equilibrium conditions to take place. Nevertheless, experimental analyses are necessary to verify this conclusion. In this study, transmission electron microscopy has been used to assess the presence of a silicon spike in front of the growing ferrite interface. The outcome allowed the authors to confirm that a paraequilibrium mode governs the transformation, supporting the conclusions of previous calculations. In addition, some issues about ferrite growth modeling are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. J. Lacaze, C. Wilson and C. Bak. Scand. J. Metall, 1994, vol 23, pp. 151-163.
2. V. Gerval and J. Lacaze. ISIJ Int, 2000, vol 40, pp. 386-392.10.2355/isijinternational.40.386 ↗
3. D. E. Coates. Metall. Mater. Trans. B, 1973, vol 4, pp. 1077-1086.10.1007/BF02645611 ↗
4. M. Wessen and I.L. Svensson. Metall. Trans. A, 1996, vol 27A, pp. 2209-2220.10.1007/BF02651875 ↗
5. R. Boeri and F. Weinberg. AFS Trans, 1989, vol 97, pp. 179-184.
6. J. Lacaze, J. Sertucha, L.M. Åberg, ISIJ Int. vol 56, pp. 1606-1615 (2016).10.2355/isijinternational.ISIJINT-2016-108 ↗
7. X. Guo, D. Stefanescu, Int. J. Cast Met. Res. vol 11, pp. 437-442 (1999)10.1080/13640461.1999.11819313 ↗
8. A. Freulon, P. de Parseval, C. Josse, J. Bourdie and J. Lacaze. Metall. Trans. A, 2016, vol 47A, pp. 5362-5371.10.1007/s11661-016-3692-3 ↗
9. D. Stefanescu. Metall. Trans. A, 2017, vol 48A, pp. 2127-2129.10.1007/s11661-017-4016-y ↗
10. J. Lacaze. Metall. Trans. A, 2017, vol. 48A, pp. 2130-2131.10.1007/s11661-017-4017-x ↗
11. G. Rivera, R. Boeri and J.A. Sikora. Cast Met, 1995, vol 8, pp. 1-5.10.1080/09534962.1995.11819186 ↗
12. L.N. García, F.D. Carazo and P.M. Dardati. Int. J. Cast. Met. Res, 2018, vol 31, pp. 209-221.
13. ASTM A536-84(2019)e1, Standard Specification for Ductile Iron Castings, ASTM International, West Conshohocken, PA, 2019, www.astm.org.
14. R. Ivanova, W. Sha and S. Malinov. ISIJ Int, 2004, vol 44, pp. 886-895.10.2355/isijinternational.44.886 ↗
15. L.A. Currie. Anal. Chim. Acta, 1999, vol 391, pp. 127-134.10.1016/S0003-2670(99)00105-1 ↗
16. J.O. Andersson, T. Helander, L. Höglund, et al. Calphad, 2002, vol 26, pp. 273-312.10.1016/S0364-5916(02)00037-8 ↗