journal article·2019-05-15

Influence of Cooling Rate on the Ferrite Prediction Diagram of Duplex Stainless Steel Castings

Longlong Liao, Scott Chumbley

Publisher page

Abstract

Six different composition steels were designed based on CD3MWCuN, a common industrial alloy formulated to have a microstructure consisting of 50 pct ferrite and 50 pct austenite. The steels were designed to have ± 10 pct Cr, Ni, and Mo over the nominal composition of CD3MWCuN and were obtained by remelting a keel bar of the base alloy and adjusting the composition. The + compositions variations were achieved simply by adding additional Cr, Ni, or Mo, while the − variations were obtained by adding additional amounts of the remaining major elements to the nominal composition of the keel bar. In this way it was possible to produce a series of alloys where the Cr/Ni equivalent ratio, Creq/Nieq, as calculated using the equations first employed by Schoffler varied from ≈ 1.35 to 1.65. A series of homogenization temperatures ranging from 1000 °C to 1250 °C were used to produce a uniform starting microstructure and the alloys were cooled at rates ranging from 500 °C to 1000 °C/hour from these homogenization temperatures. Air-cooled and water-quenched samples were examined as well. Based on observations of the microstructure a generalized ferrite prediction diagram was developed that takes into account homogenization temperature, cooling rate, and chromium-to-nickel equivalence ratio (Creq/Nieq) to predict the amount of ferrite that can be expected in the alloy. This diagram represents the first major evaluation of ferrite content as a function of homogenization temperature and cooling rate specifically for cast duplex alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. N.D. Ryan and H.J. Mcqueen: Mater. Sci. Eng., 1986, vol. 81, pp. 259-272.10.1016/0025-5416(86)90267-3 ↗
2. J.O. Nilsson: Mater. Sci. Technol., 1992, vol. 8, pp. 685-700.10.1179/mst.1992.8.8.685 ↗
3. S. Atamert and J.E. King: Mater. Sci. Technol., 1992, vol. 8, pp. 896-911.10.1179/mst.1992.8.10.896 ↗
4. C.D. Lundin and C.P.D. Chou: WRC. Bulletin., 1983, vol. 289, pp. 1-80.
5. C.D. Lundin, W.T. Delong and D.F. Spon: Weld. J., 1975, vol. 54, pp. 241 s-246s.
6. D.L. Olson: Weld. J., 1985, vol. 64, pp. 281s-295s.
7. N.S.L. Philips, L.S. Chumbley and B. Gleeson: J. Mat. Eng. Perf., 2009, vol. 18, pp. 1285-1293.10.1007/s11665-008-9323-4 ↗
8. Y-J. Kim, O. Ugurlu, C. Jiang, B. Gleeson and L.S. Chumbley: Metall. Mater. Trans. A, 2007, vol. 38, pp. 203-211.10.1007/s11661-006-9049-6 ↗
9. Y-J. Kim, L.S. Chumbley, B. Gleeson: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3377-3386.10.1007/s11661-004-0174-9 ↗
10. Y.J. Kim, L.S. Chumbley: J. Mat. Eng. Perf., 2008, vol. 17, pp. 224-239.10.1007/s11665-007-9134-z ↗
11. E. Johnson, Y.J. Kim and L.S. Chumbley: Scr. Mater., 2004, vol. 50, pp. 1351-1354.10.1016/j.scriptamat.2004.02.014 ↗
12. A.W. Stockdale and J.N. Dupont: Sci. Technol. Weld. Joi., 2011, vol. 67, pp. 426-432.10.1179/1362171811Y.0000000007 ↗
13. L. Liao and S. Chumbley: Appl. Sci., 2019, vol. 1(123), pp. 1-10.
14. A. Schaeffler: Metal. Progress., 1949, vol. 56, pp. 680-680B.
15. W.T. Delong: Weld. J., 1974, vol. 53, pp. 273s-286s.
16. E.A. Schoefer: Handbook of Stainless Steels, 1997. ASM, Materials Park
17. L.S. Aubrey, P.F. Wieser, W.J. Pollard and E.A. Schoefer: ASTM STP 756.
18. D.J. Kotechi and T.A. Siewert: Weld. J., 1992, vol. 71, pp. 171s-178s.
19. S.S. Babu, J.M. Vitek, Y.S. Iskander and S.A. David: Sci. Technol. Weld. Joi., 1997, vol. 2, pp. 279-285.10.1179/stw.1997.2.6.279 ↗
20. J.M. Vitek, S.A. David and C.R. Hinman: Weld. J., 2003, vol 82(1), pp. 10s–17s.
21. M. Vasudevan, A.K Bhaduri, Baldev Raj and K Prasad Rao: J. Mater. Process. Tech., 2003, vol 142, pp. 20-28.10.1016/S0924-0136(03)00430-8 ↗
22. L. Liao and S. Chumbley: Metall. Mater. Trans. A, 2019. https://doi.org/10.1007/s11661-019-05159-3.10.1007/s11661-019-05159-3 ↗
23. L. Liao, Ferrite percentage prediction of Duplex stainless steels as a function of cooling rates. Iowa State University, 2018, pp. 1–160.
24. J. Dupont and J.D. Farren: Corrosion, 2011, vol. 67, pp. 055002-1-055002-11.10.5006/1.3586019 ↗