Characterization of a Continuously Cooled Dual-Phase Steel Microstructure
Source abstract
Abstract
Continuous-cooling transformation behavior of a DP steel was analyzed from dilation curves with cooling rates that range between 10 °C/s and 98 °C/s and data taken in 10 °C/s increments. For a precise understanding of the problem, several metallographic techniques were used in order to determine which phases and types of transformation are present, the grain structure and crystal defects generated for each cooling rate, among other characteristics. The local distribution of the main alloying elements was analyzed by wave dispersive spectroscopy. From the dilation curves, the relative amount of transformed phase was estimated, as well as the first derivatives as a function of both temperature and time to analyze the characteristics of the transformation and correlate these with a characteristic microstructure. To further understand these results, the mobility of suitable alloying elements such as Cr, Mn, Al, and P was evaluated. The analysis showed that at lower cooling rates, 10 °C/s to 20 °C/s, the transformation occurs at temperatures above 700 °C (at which the majority of alloying atoms have good mobility) in a relatively slow process producing polygonal ferrite. At cooling rates greater than 40 °C/s, the transformation occurs below 700 °C in a relatively short time, where massive transformation takes place. Finally, a cooling rate of 30 °C/s gives a mixed transformation, producing an appreciably smaller grain structure with a high density of crystal defects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. R. G. Davis: Metall. Trans. A, 1979, vol. 10A pp. 113-18.10.1007/BF02686414 ↗
2. M.H. Saleh, R. Piestner: J. Mat Proc Tech, 2001, vol 113, pp. 587-593.10.1016/S0924-0136(01)00638-0 ↗
3. A. Fallahi: Mat. Sci. Tech., 2002, vol. 18-5, pp. 451-454.
4. M. Calcagnotto, D. Ponge, Y. Adachi, and D. Raabe: Effect of Grain Refinement on Strength and Ductility in Dual-Phase Steels. Proc. 2nd Int. Symp. Steel Sci. ISSS 2009 Oct 21–24, The Iron and Steel Institute of Japan, Kyoto, 2009.
5. J. Drumond, O. Girina, J. F. da Silva Filho, N. Fonstein, C. A. S. de Oliveira (2012) Metallogr. Microstruct. Anal. 1: 217–223.10.1007/s13632-012-0034-8 ↗
6. L. Schemmann, S. Zaefferer, D. Raabe, F. Friedel, D. Mattissen: Acta Mater., 2015, vol. 95, pp. 386–398.10.1016/j.actamat.2015.05.005 ↗
7. Y. Granbom: Structure and Mechanical Properties of Dual-Phase Steels – An Experimental and Theoretical Analysis, PhD Thesis, Royal Institute of Technology School of Industrial Engineering and Management Materials Science and Engineering, Division of Mechanical Metallurgy, Stockholm, Sweden.
8. W. Andrews: JISI, 1965, vol. 203, pp. 721–27.
9. D.L. Kaiser and J.R.L. Watters: Standard Reference Material ®, 2010, vol. 660b, pp. 721.
10. H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65–71.10.1107/S0021889869006558 ↗
11. L. Lutterotti, S.Matthies, H.-R.Wenk: J. Appl. Phys., 1997, vol 81, pp. 594-600.10.1063/1.364220 ↗
12. L. Lutterotti: Maud (Material Analysis Using Diffraction), 1997.
13. J. S. Kirkaldy, D. Venugopalan: Phase Transformations in Ferrous Alloys, TMS-AIME, Warrendale, PA, 1984, p. 125-48.
14. C.Y. Kung and J.J. Rayment: Metall. Trans. A, 1982, vol. 13A, pp. 328-331.10.1007/BF02643327 ↗
15. K. Tsuzaki, T. Maki: J. Phys., 1995, 5(C8), 61–70.
16. G. Vander Voort: Metallography Principles and Practice, 1st ed., McGraw Hill Inc, New York, NY, 1984, pp. 442–43.10.31399/asm.tb.mpp.9781627082600 ↗
17. M. Calcagnotto, D. Ponge, D. Raabe: ISIJ Int., 2012, vol. 52-5, pp. 874-883.10.2355/isijinternational.52.874 ↗
18. F. S. Bufington, K. Hirano, M. Cohen: Acta Metall., 1961, vol. 9, pp. 434-439.10.1016/0001-6160(61)90137-7 ↗
19. C.G. Lee, Y. Iijima, T. Hiratani, K. Hirano: Mat. Trans. JIM, 1990, vol. 31-4, pp. 255-261.10.2320/matertrans1989.31.255 ↗
20. T. Matsuyama, H. Hosokawa, H. Suto: Trans. Japan Institute of Metals, 1983, vol. 24-8, pp. 589- 594.10.2320/matertrans1960.24.589 ↗
21. H. Oikawa: Iron and steel, 1982, vol. 68, 10, pp. 1489-9710.2355/tetsutohagane1955.68.10_1489 ↗
22. J. Fridberg, L.E. Torndahl and M. Hillert, Jernkont. Ann., 1969, vol. 153, pp. 263-76.
23. H. Amara, C. C. Fu, F. Soisson, P. Maugis: Physical Review B, 2010, vol 81, pp. 174101-1-174101-11.10.1103/PhysRevB.81.174101 ↗
24. F. J. Bradshaw, G. Hoyle, K. Speigh. Diffusion of Silicon in Ferrite. Nature, 1953, vol. 171, pp. 488–88.10.1038/171488a0 ↗
25. C. Bos, F. Sommer, EJ Mittemeijer. An atomistic analysis of the interface mobility in a massive transformation. Acta Mater., 2005, vol. 53, pp. 5333–5341.10.1016/j.actamat.2005.08.010 ↗
26. F. Liu, S.J. Song, F. Sommer, E.J. Mittemeijer: Acta Mater. 2009, vol. 57, pp. 6176–6190.10.1016/j.actamat.2009.08.046 ↗