Numerical Investigations of the Effects of Substitutional Elements on the Interface Conditions During Partitioning in Quenching and Partitioning Steels
Source abstract
Abstract
In quenched and partitioned steels, carbon partitioning is considered to be driven by a constraint para-equilibrium at the martensite/austenite interface. Using Thermo-Calc calculations, we investigated the effect of non-partitioned elements on the resulting interface condition. Among all tested elements, only aluminum and chromium have significant effects. From this numerical study, a practical composition- and temperature-dependent relationship describing interface tie lines was derived and calibrated for Fe-C-2.5Mn-1.5Si-X wt pct alloys (X = Cr or Al).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Speer, J., Matlock, D. K., De Cooman, B. C., and Schroth, J. G. Acta mater., 2003, Vol. 51(9), pp. 2611-2622.10.1016/S1359-6454(03)00059-4 ↗
2. Matlock, D. K., Bräutigam, V. E., and Speer, J. G. Mater. Sci. Forum, 2003, Vol. 426, pp. 1089-1094.10.4028/www.scientific.net/MSF.426-432.1089 ↗
3. Santofimia, M. J., Zhao, L., and Sietsma, J. Scr. Mater., 2008, Vol. 59(2), pp. 159-162.10.1016/j.scriptamat.2008.02.045 ↗
4. Traint, S., Pichler, A., Hauzenberger, K., Stiaszny, P., and Werner, E. Steel Res. Int., 2002, Vol. 73(6-7), pp. 259-266.10.1002/srin.200200206 ↗
5. Leslie, W. C., and Rauch, G. C. Metall. Mater. Trans. A, 1978, Vol. 9(3), pp. 343-349.10.1007/BF02646383 ↗
6. C. Bellot, P. Lamesle, and D. Delagnes: Acta Metall. Sin. (Engl. Lett.), 2013, vol. 26, pp. 553–57.10.1007/s40195-013-0078-z ↗
7. Hantcherli, M. Thesis, 2010, Ecole Nationale Supérieure des Mines de Saint-Etienne
8. Seo, E. J., Cho, L., and De Cooman, B. C. Acta Mater., 2016, Vol. 107, pp. 354-365.10.1016/j.actamat.2016.01.059 ↗
9. Ren, S. B., and Wang, S. T. Metall. Mater. Trans. A, 1988, Vol. 19(10), pp. 2427-2432.10.1007/BF02645470 ↗
10. Jang, J. H., Bhadeshia, H. K. D. H., and Suh, D. W. Scr. Mater., 2013, Vol. 68(3), pp. 195-198.10.1016/j.scriptamat.2012.10.017 ↗
11. Quidort, D., and Bouaziz, O. Can. Metall. Q., 2004, Vol. 43(1), pp. 25-34.10.1179/cmq.2004.43.1.25 ↗
12. Takahama, Y., Santofimia, M. J., Mecozzi, M. G., Zhao, L., and Sietsma, J. Acta Mater., 2012, Vol. 60(6), pp. 2916-2926.10.1016/j.actamat.2012.01.055 ↗
13. S.Y.P. Allain, S. Gaudez, G. Geandier, J.C. Hell, M. Gouné, F. Danoix, S. Aoued, and A. Poulon-Quintin: Mater. Sci. Eng. A., 2018, vol. 710, pp. 245–50.10.1016/j.msea.2017.10.105 ↗
14. Hell, J. C., Dehmas, M., Allain, S., Prado, J. M., Hazotte, A., and Chateau, J. P. ISIJ Int., 2011, Vol. 51(10), pp. 1724–32.10.2355/isijinternational.51.1724 ↗
15. Santofimia, M. J., Zhao, L., Petrov, R., Kwakernaak, C., Sloof, W. G., and Sietsma, J. Acta Mater., 2011, Vol. 59(15), pp. 6059-6068.10.1016/j.actamat.2011.06.014 ↗
16. S.Y.P. Allain, G. Geandier, J.C. Hell, M. Soler, F. Danoix, and M. Gouné: Metals, 2017, vol. 7, 232.10.3390/met7070232 ↗