journal article·2018-06Open access

Influence of the Strain History on TWIP Steel Deformation Mechanisms in the Deep-Drawing Process

R. Lapovok, I. Timokhina, A-K. Mester, M. Weiss, A. Shekhter

Abstract

A study of preferable deformation modes on strain path and strain level in a TWIP steel sheet was performed. Different strain paths were obtained by stretch forming of specimens with various shapes and tensile tests. TEM analysis was performed on samples cut from various locations in the deformed specimens, which had different strain paths and strain levels and the preferable deformation modes were identified. Stresses caused by various strain paths were considered and an analytical analysis performed to identify the preferable deformation modes for the case of single crystal. For a single crystal, in assumption of the absence of lattice rotation, the strain path and the level of accumulated equivalent strain define the preferable deformation mode. For a polycrystalline material, such analytical analysis is not possible due to the large number of grains and, therefore, numerical simulation was employed. For the polycrystalline material, the role of strain path diminishes due to the presence of a large number of grains with random orientations and the effect of accumulated strain becomes dominant. However, at small strains the strain path still defines the level of twinning activity. TEM analysis experimentally confirmed that various deformation modes lead to different deformation strengthening mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. J.-K. Kim and B.C. De Cooman: Mater. Sci. Eng. A, 2016, vol. 676, pp. 216-231.10.1016/j.msea.2016.08.106 ↗
2. O. Bouaziz, S. Allain, C. Scott, P. Cugy, D. Barbier: Solid State Mater. Science, 2011, vol. 15, pp. 141-168.10.1016/j.cossms.2011.04.002 ↗
3. I. Karaman, H. Sehitoglu, K. Gall, Y.I. Chumlyakov: Scripta Materialia, 1998, vol. 38, pp. 1009-1015.10.1016/S1359-6462(97)00581-2 ↗
4. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. Maier, I.V. Kireeva: Scripta Materialia, 2001, vol. 44, pp. 337-343.10.1016/S1359-6462(00)00600-X ↗
5. William F. Hosford: Mechanical Behavior of Materials, 2nd ed., Cambridge University Press, Cambridge, 2005, pp. 166-75.10.1017/CBO9780511810930 ↗
6. J.W. Christian and S. Mahajant: Progress in Materials Science, 1995, vol. 39, pp. 1-157.10.1016/0079-6425(94)00007-7 ↗
7. K. Renard, H. Idrissi, D. Schryvers, P.J. Jasques: Scripta Materialia, 2012, vol. 66, pp. 966-971.10.1016/j.scriptamat.2012.01.063 ↗
8. L. Bracke, L. Kestens, J. Penning: Scripta Materialia, 2009, vol. 61, pp. 220-222.10.1016/j.scriptamat.2009.03.045 ↗
9. I. Gutierrez-Urrutia, S. Zaefferer, D. Raabe: Materials Science & Engineering A, 2010, vol. 527, pp. 3552-3560.10.1016/j.msea.2010.02.041 ↗
10. P. Yang, Q. Xie, L. Meng, H. Ding, Z. Tang: Scripta Materialia, 2006, vol. 55, pp. 629-631.10.1016/j.scriptamat.2006.06.004 ↗
11. L. Meng, P. Yang, Q. Xie, H. Ding, Z.Tang: Scripta Materialia, 2007, vol. 56, pp. 931-934.10.1016/j.scriptamat.2007.02.028 ↗
12. I. Gutierrez-Urrutia and D. Raabe: Acta Materialia, 2011, vol. 59, pp. 6449-6462.10.1016/j.actamat.2011.07.009 ↗
13. Z. Chen, X. Zhang, C. Liu, Z. Zhou, S. Li: Journal of Materials Science, 2002, vol. 37, pp. 2843 – 2848.10.1023/A:1015849923537 ↗
14. U.F. Kocks, G.R. Canova, J.J. Jonas: Acta Metall., 1983, vol. 31, pp. 1243-1252.10.1016/0001-6160(83)90186-4 ↗
15. Z. Chen, H. Cai, S. Li, X. Zhang, F. Wang, C. Tan: Materials Science and Engineering A, 2007, vol. 464, pp. 101–109.10.1016/j.msea.2007.03.081 ↗
16. I.J. Beyerlein, L.S. Toth, S. Suwas: Philosophical Magazine, 2007, vol. 87, pp. 885-906.10.1080/14786430601003866 ↗
17. GOM mbH: http://www.gom.com
18. C. F. Gu, M. Hoffman, L.S. Toth, Y.D. Zhang: Materials Characterization, 2015, vol. 101, pp. 180–188.,10.1016/j.matchar.2015.02.003 ↗
19. C.F. Gu, L.S. Toth, M. Hoffman: Acta Mater., 2014, vol. 62, pp. 212–224.10.1016/j.actamat.2013.09.048 ↗
20. A.A. Saleh, C. Haase, E.V. Pereloma, D.A. Molodov, A.A. Gazder: Acta Mater., 2014, vol.70, pp. 259-271.10.1016/j.actamat.2014.02.033 ↗
21. S.R. Kalidindi, C.A. Bronkhorst, L. Anand: Journal of the Mechanics and Physics of Solids, 1992, vol. 40, pp. 537-569.10.1016/0022-5096(92)80003-9 ↗
22. V. Shterner, I. Timokhina, H. Beladi: Materials Science and Engineering A, 2016, vol. 669, pp. 437-446.10.1016/j.msea.2016.05.104 ↗
23. J. He Ji, D. Zeng, X. Zhu. C. Xia, S. Li: International Journal of Solids and Structures, 2014, vol. 51, pp. 402-415.10.1016/j.ijsolstr.2013.10.013 ↗