Microstructural Evolution of Inverse Bainite in a Hypereutectoid Low-Alloy Steel
Source abstract
Abstract
Microstructural evolution of inverse bainite during isothermal bainite transformation of a hypereutectoid low-alloy steel at 773 K (500 °C) was investigated through a series of interrupted isothermal experiments using a quench dilatometer. Microstructural characterization revealed that the inverse bainitic transformation starts by the nucleation of cementite (Fe3C) from parent austenite as a midrib in the bainitic microstructure. The inverse bainite becomes “degenerated” to typical upper bainite at prolonged transformation times. Crystallographic orientation relationships between the individual phases of inverse bainite microstructure were found to obey $$ \begin{array}{*{20}l} { \gamma || \theta } \hfill & { \alpha || \theta } \hfill & { \gamma || \alpha } \hfill \\ {\{ 111\} \gamma ||\{ \overline{2} 21\} \theta } \hfill & {\{ 110\} \alpha ||\{ \overline{2} 21\} \theta \,} \hfill & {\,\{ 111\} \gamma ||\{ 110\} \alpha } \hfill \\ {\{ 111\} \gamma ||\{ 211\} \theta } \hfill & {\,\{ 110\} \alpha ||\{ 211\} \theta } \hfill & {} \hfill \\ \end{array} $$ Furthermore, the crystallographic orientation deviations between the individual phases of inverse bainite microstructure suggest that the secondary carbide nucleation occurs from the inverse bainitic ferrite. Thermodynamic driving force calculations provide an explanation for the observed nucleation sequence in inverse bainite. The degeneracy of inverse bainite microstructure to upper bainite at prolonged transformation times is likely due to the effects of cementite midrib dissolution at the early stage and secondary carbide coarsening at the later stage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. H.K.D.H. Bhadeshia and D.V. Edmonds: Metall. Trans. A, 1979, vol. 10A, pp. 895–907.10.1007/BF02658309 ↗
2. 2.H.K.D.H. Bhadeshia and D.V. Edmonds: Acta Metall., 1980, vol. 28 (9), pp. 1265–73.10.1016/0001-6160(80)90082-6 ↗
3. 3.C. Zener: Trans. TMS-AIME, 1946, vol. 167, pp. 550–59.
4. 4.T. Ko and S.A. Cottrell: J. Iron Steel Inst., 1952, vol. 172, p. 307.
5. M. Hillert: Scripta Mater., 2002, vol. 47, pp. 175–80.10.1016/S1359-6462(02)00125-2 ↗
6. 6.T.Y. Hsu: Metall. Trans. A, 1990, vol. 21A, pp. 811–16.10.1007/BF02656564 ↗
7. 7.A. Hultgren: Trans. ASM, 1947, vol. 39, pp. 915–1005.
8. 8.G. Krauss: Steels: Processing, Structure, and Performance, 2nd ed., ASM International, Materials Park, OH, 2015, pp. 99–112.10.31399/asm.tb.spsp2.t54410099 ↗
9. 9.H.K.D.H. Bhadeshia: Bainite in Steels, Transformations, Microstructure and Properties, 2nd ed., IOM Communications Ltd., London, 2001, pp. 277–84.
10. 10.M. Hillert: Jernkont. Ann., 1957, vol. 141, pp. 757–89.
11. 11.K.R. Kinsman and H.I. Aaronson: Metall. Trans., 1970, vol. 1, pp. 1485–88.10.1007/BF02900291 ↗
12. 12.H. Lee, G. Spanos, G. Shiflet, and H. Aaronson: Acta Metall., 1988, vol. 36 (4), pp. 1129–40.10.1016/0001-6160(88)90166-6 ↗
13. 13.H. Goldenstein and J.A. Cifuentes: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1747–55.10.1007/s11661-006-0117-8 ↗
14. 14.H. Goldenstein, J. Alexander, B. Cifuentes, and A. Sinatora: Solid-Solid Phase Transformations in Inorganic Materials, TMS, Warrendale, PA, 2005, pp. 673–86.
15. P. Kolmskog. Ph.D. Thesis, KTH, Sweden, 2013.
16. 16.P. Kolmskog and A. Borgenstam: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3941–51.10.1007/s11661-011-0794-9 ↗
17. 17.C. Goulas, M.G. Mecozzi, and J. Sietsma: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3077–87.10.1007/s11661-016-3418-6 ↗
18. 18.R. Kannan, Y. Wang, and L. Li: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 948–52.10.1007/s11661-016-3924-6 ↗
19. 19.M. Militzer, R. Pandi, and E.B. Hawbolt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1547–56.10.1007/BF02649814 ↗
20. 20.N. Doebelin and R. Kleeberg: J. Appl. Crystallogr., 2015, vol. 48 (5), pp. 1573–80.10.1107/S1600576715014685 ↗
21. 21.C. Schneider, W. Rasband, and K. Eliceiri: Nat. Methods, 2012, vol. 9 (7), pp. 671–75.10.1038/nmeth.2089 ↗
22. L.B. McCusker, R.B. Von Dreele, D.E. Cox, D. Louërd, P. Scardie: J. Appl. Crystallogr., 32(1): 36–50.10.1107/S0021889898009856 ↗
23. 23.P.P. Suikkanen, C. Cayron, A.J. DeArdo, and L.P. Karjalainen: J. Mater. Sci. Technol., 2013, vol. 29 (4), pp. 359–66.10.1016/j.jmst.2013.01.015 ↗
24. 24.N. Zhong, X. Wang, Z. Guo, and Y. Rong: J. Mater. Sci. Technol., 2011, vol. 27, pp. 475–80.10.1016/S1005-0302(11)60094-7 ↗
25. I. Miroshnichenko: in Crytallization Processes, Consultant’s Bureau, New York, 1966, pp. 55–59.10.1007/978-1-4899-4626-3_9 ↗
26. 26.D.V. Malakhov, D. Panahi, and M. Gallerneault: CALPHAD, 2010, vol. 34 (2), pp. 159–66.10.1016/j.calphad.2010.01.006 ↗
27. 27.M. Hillert: Phase Equilibria, Phase Diagrams and Phase Transformations—Their Thermodynamic Basics, 2nd ed., Cambridge University Press, London, 2008, pp. 56–62.
28. R. Purdy, D. Malakhov, and H. Zurob: Proc. 6th Int. School-Conf., Phase Diagrams in Materials Science, 2004, pp. 20–41.
29. 29.M. Onink, C.M. Brakman, F.D. Tichelaar, E. Mittemeijer, S. van der Zwaag, J.H. Root, N.B. Konyer: Scripta Metall. Mater., 1993, vol. 29 (8), pp. 1011–16.10.1016/0956-716X(93)90169-S ↗
30. Y.J. Zhang, G. Miyamoto, K. Shinbo, T. Furuhara: Scripta Mater. 2013, 69 (1): 17–20.10.1016/j.scriptamat.2013.03.020 ↗
31. 31.Y.J. Zhang, G. Miyamoto, K. Shinbo, T. Furuhara, T. Ohmura, T. Suzuki, and K. Tsuzaki: Acta Mater., 2015, vol. 84, pp. 375–84.10.1016/j.actamat.2014.10.049 ↗
32. 32.G. Miyamoto, R. Hori, B. Poorganji, and T. Furuhara: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3436–43.10.1007/s11661-013-1702-2 ↗
33. 33.W.D. Nix and H. Gao: J. Mech. Phys. Solids, 1998, vol. 46 (3), pp. 411–25.10.1016/S0022-5096(97)00086-0 ↗
34. 34.S. Graca, R. Colaco, P. Carvalho, and R. Vilar: Mater. Lett., 2008, vol. 62 (23), pp. 3812–14.10.1016/j.matlet.2008.04.072 ↗
35. 35.I.B. Timokhina, K.D. Liss, D. Raabe, K. Rakha, H. Beladi, X.Y. Xiong, and P.D. Hodgson: J. Appl. Crystallogr., 2016, vol. 49 (2), pp. 399–414.10.1107/S1600576716000418 ↗
36. 36.I. Timokhina, H. Beladi, X. Xiong, Y. Adachi, and P. Hodgson: Acta Mater., 2011, vol. 59 (14), pp. 5511–22.10.1016/j.actamat.2011.05.024 ↗
37. 37.I. Lonardelli, M. Bortolotti, W. van Beek, L. Girardini, M. Zadra, and H. Bhadeshia, Mater. Sci. Eng.: A, 2012, vol. 555, pp. 139–47.10.1016/j.msea.2012.06.043 ↗
38. 38.A. Korznikov, Y. Ivanisenko, D. Laptionok, I. Safarov, V. Pilyugin, and R. Valiev: Nanostruct. Mater., 1994, vol. 4 (2), pp. 159–67.10.1016/0965-9773(94)90075-2 ↗
39. 39.J. Languillaume, G. Kapelski, and B. Baudelet: Acta Mater., 1997, vol. 45 (3), pp. 1201–12.10.1016/S1359-6454(96)00216-9 ↗
40. 40.G. Job and F. Herrmann: Eur. J. Phys., 2006, vol. 27 (2), pp. 353–71.10.1088/0143-0807/27/2/018 ↗
41. 41.H.B. Aaron and G.R. Kotler: Metall. Trans., 1971, vol. 2, pp. 393–408.10.1007/BF02663326 ↗
42. 42.W.C. Chiou, Jr. and E.A. Carter: Surf. Sci., 1970, vol. 530 (1–2), pp. 87–100.
43. 43.H.R. Wang and W. Wang: Mater. Sci. Technol., 2013, vol. 23 (11), pp. 1305–08.10.1179/174328407X226743 ↗
44. 44.N.C. Danh, K. Rajan, and W. Wallace: Metall. Trans. A, 1983, vol. 14A, pp. 1843–50.10.1007/BF02645554 ↗
45. 45.M. Nicolas and A. Deschamps: Acta Mater., 2003, vol. 5 (20), pp. 6077–94.10.1016/S1359-6454(03)00429-4 ↗
46. 46.J. Park: Mater. Sci. Eng.: A, 1988, vol. 103 (2), pp. 223–31.10.1016/0025-5416(88)90512-5 ↗