Characterizing the Effect of Laser Power on Laser Metal Deposited Titanium Alloy and Boron Carbide
Source abstract
Abstract
Titanium alloy has gained acceptance in the aerospace, marine, chemical, and other related industries due to its excellent combination of mechanical and corrosion properties. In order to augment its properties, a hard ceramic, boron carbide has been laser cladded with it at varying laser powers between 0.8 and 2.4 kW. This paper presents the effect of laser power on the laser deposited Ti6Al4V-B4C composites through the evolving microstructures and microhardness. The microstructures of the composites exhibit the formation of α-Ti phase and β-Ti phase and were elongated towards the heat affected zone. These phases were terminated at the fusion zone and globular microstructures were found growing epitaxially just immediately after the fusion zone. Good bondings were formed in all the deposited composites. Sample A1 deposited at a laser power of 0.8 kW and scanning speed of 1 m/min exhibits the highest hardness of HV 432 ± 27, while sample A4 deposited at a laser power of 2.0 kW and scanning speed of 1 m/min displays the lowest hardness of HV 360 ± 18. From the hardness results obtained, ceramic B4C has improved the mechanical properties of the primary alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Z. Li, J. Li, Y. Zhu, X. Tian, and H. Wang, “Variant selection in laser melting deposited α + β titanium alloy,” J. Alloys Compd., vol. 661, pp. 126–135, 2016.10.1016/j.jallcom.2015.11.172 ↗
2. A. J. Pinkerton, “Lasers in additive manufacturing,” Opt. Laser Technol., vol. 78, pp. 25–32, Sep. 2015.10.1016/j.optlastec.2015.09.025 ↗
3. R. M’Saoubi, D. Axinte, S. L. Soo, C. Nobel, H. Attia, G. Kappmeyer, S. Engin, and W.-M. Sim, “High performance cutting of advanced aerospace alloys and composite materials,” CIRP Ann. - Manuf. Technol., vol. 64, no. 2, pp. 557–580, Jul. 2015.10.1016/j.cirp.2015.05.002 ↗
4. V. Domnich, S. Reynaud, R. A. Haber, and M. Chhowalla, “Boron Carbide: Structure, Properties, and Stability under Stress,” J. Am. Ceram. Soc., vol. 94, no. 11, pp. 3605–3628, Nov. 2011.10.1111/j.1551-2916.2011.04865.x ↗
5. B. S. Yilbas and C. Karatas, “Laser treatment of boron carbide surfaces: Metallurgical and morphological examinations,” J. Alloys Compd., vol. 603, pp. 125–131, 2014.10.1016/j.jallcom.2014.01.219 ↗
6. T. S. Srivatsan, G. Guruprasad, D. Black, R. Radhakrishnan, and T. S. Sudarshan, “Influence of TiB2 content on microstructure and hardness of TiB2-B4C composite,” Powder Technol., vol. 159, no. 3, pp. 161–167, 2005.10.1016/j.powtec.2005.08.003 ↗
7. S. Tuff, J. Dubois, and G. Fantozzi: Int. J. Refract. Met. Hard Mater., vol. 14, pp. 305–310, 1996.10.1016/S0263-4368(96)00012-1 ↗
8. W. Xiang, M. Xuliang, L. Xinlin, D. Lihua, and W. Mingjia, “Effect of boron addition on microstructure and mechanical properties of TiC/Ti6Al4V composites,” Mater. Des., vol. 36, pp. 41–46, 2012.10.1016/j.matdes.2011.10.040 ↗
9. J. Zhu, A. Kamiya, T. Yamada, W. Shi, and K. Naganuma, “Influence of boron addition on microstructure and mechanical properties of dental cast titanium alloys,” Mater. Sci. Eng. A, vol. 339, no. 1, pp. 53–62, 2003.10.1016/S0921-5093(02)00102-8 ↗
10. V. S. Balaji and S. Kumaran, “Densification and microstructural studies of titanium–boron carbide (B4C) powder mixture during spark plasma sintering,” Powder Technol., vol. 264, pp. 536–540, 2014.10.1016/j.powtec.2014.05.050 ↗
11. E3-11, Standard Guide for Preparation of Metallographic Specimens, ASTM International (Accessed from the data base in 2011).
12. Struers Application Note on Titanium. http://www.struers.com/resources/elements/12/104827/Application_Note_Titanium_English.pdf. Accessed 2013.
13. W. D. Callister and D. G. Rethwisch, “Mechanical Properties of Metals,” in Materials Science and Engineering, Eighth., John Wiley and Sons, Inc, 2011, pp. 174–179.
14. ASTM E384-11e1, Standard Test Method for Knoop and Vickers Hardness of Materials, ASTM International Book of Standards, vol. 03 (2011).