Effect of Melt Superheating Treatment on the Latent Heat Release of Sn
Source abstract
Abstract
The accuracy of the baseline evaluation is of importance for calculating the transition enthalpy such as the latent heat of the crystallization. This study demonstrates the modified method of the equivalent non-latent heat baseline, by which the transition enthalpy can be measured accurately according to the transition peak in differential scanning calorimetric curve. With this method, the effect of melt superheating treatment time on the latent heat release upon the solidification of tin is investigated. The results show that the latent heat increases by increasing the treatment time, and is close to a constant when the treatment time is large enough, indicating the homogeneous system. And then, a simple model is established to describe the changes of the crystallization latent heat with the treatment time, which is confirmed by the experimental data of Sn.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Silicon and Solar Cell Technologies · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. G.D. Archer, and R. Steffen: J. Chem. Eng. Data., 2003, vol. 48, pp. 1157–63.10.1021/je030112g ↗
2. J.A. Kennedy, and S.M. Clark: Thermochim. Acta, 1997, vol. 307, pp. 27–35.10.1016/S0040-6031(96)02962-0 ↗
3. J.P. Dumas: J. Phys. D: Appl. Phys., 1978, vol. 11, pp. 2–5.10.1088/0022-3727/11/1/003 ↗
4. W.B. Li, F. Xue, E.Y. Ding, and R.S. Chen: J. Instrum. Anal., 2006, vol. 25, pp. 16–19.
5. X.S. Fu, G.Q. Chen, Y.F. Zu, J.T. Luo, and W.L. Zhou: Scripta Mater., 2013, vol. 68, pp. 731–34.10.1016/j.scriptamat.2013.01.009 ↗
6. M. Tetsuichi, S. Eiichiro, and O. Kazuo: J. Jpn. Inst. Light Met., 1994, vol. 44, pp. 427–32.10.2464/jilm.44.427 ↗
7. N.C. Si, K.Q. Sun, and Q. Wu: Chin. J. Nonferr. Metal., 2007, vol. 17, pp. 547–53.
8. G.B. Mi, P.J. Li, and L.J. He: Sci. China Phys. Mech.. 2010, Vol. 53, pp. 1823–30.10.1007/s11433-010-4107-x ↗
9. Z.H. Chen, X.D. Chen, X.D. Bao, L.L. Jiang, and Y.F. Sun: Trans. Mater. Heat Treat., 2014, vol. 35, pp. 70–74.
10. Q.L. Li, T.D. Xia, Y.F. Lan, and P.F. Li: Mater. Sci. Tech-lond, 2014, vol. 30, pp. 835–41.10.1179/1743284713Y.0000000415 ↗
11. S.A. Al Kahtani, H.W. Doty, and F.H. Samuel: Int. J. Cast Metal. Res., 2014, vol. 27, pp. 38–48.10.1179/1743133613Y.0000000077 ↗
12. Z.H. Zhang, X.F. Bian, Y. Wang, and X.F. Liu: T. Nonferr. Metal. Soc., 2001, vol. 11, pp. 374–77.
13. F.E. Chang, Z.Y. Jian, F. Wang, and S.C. Chen: Foundry Technology, 2005, vol. 26, pp. 1042–44
14. Z. Wang, F. Wang, Y. Peng, Z. Zheng, and Y. Han: Science, 2012, vol. 338, pp. 87–9010.1126/science.1224763 ↗
15. W.F. Hemminger, and S.M. Sarge: J. Therm. Anal. Calorim., 1991, vol. 37, pp. 1455–77.10.1007/BF01913481 ↗
16. W.P. Brennan, B. Miller, and J.C. Whitwell: Ind. Eng. Chem. Fundam., 1969, vol. 8, pp. 314.10.1021/i160030a021 ↗
17. H. Yang, Y. Lu, M. Chen, and Z. Guo: Sci. China Ser. G: 2007, vol. 50, pp. 407–13.10.1007/s11433-007-0039-5 ↗
18. E.A. Brandes, and G.B. Brook. Smithells Metal Reference Book, Butterworth-Heinemann Ltd., Oxford, 1992.
19. R.F. Tournier: Physica B, 2007, vol. 392, pp. 79–91.10.1016/j.physb.2006.11.002 ↗