Creep and Oxidation Behavior of Modified CF8C-Plus with W, Cu, Ni, and Cr
Source abstract
Abstract
The microstructures of modified CF8C-Plus (Fe-19Cr-12Ni-0.4W-3.8Mn-0.2Mo-0.6Nb-0.5Si-0.9C) with W and Cu (CF8CPWCu) and CF8CPWCu enhanced with 21Cr + 15Ni or 22Cr + 17.5Ni were characterized in the as-cast condition and after creep testing. When imaged at lower magnifications, the as-cast microstructure was similar among all three alloys as they all contained a Nb-rich interdendritic phase and Mn-based inclusions. Transmission electron microscopy (TEM) analysis showed the presence of nanoscale Cu-rich nanoprecipitates distributed uniformly throughout the matrix of CF8CPWCu, whereas in CF8CPWCu22/17, Cu precipitates were found primarily at the grain boundaries. The presence of these nanoscale Cu-rich particles, in addition to W-rich Cr23C6, nanoscale Nb carbides, and Z-phase (Nb2Cr2N2), improved the creep strength of the CF8CPWCu steel. Modification of CF8CPWCu with Cr and Ni contents slightly decreased the creep strength but significantly improved the oxidation behavior at 1073 K (800 °C). In particular, the addition of 22Cr and 17.5Ni strongly enhanced the oxidation resistance of the stainless steel resulting in a 100 degrees or greater temperature improvement, and this composition provided the best balance between improving both mechanical properties and oxidation resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. [1] N.D. Evans, P.J. Maziasz, J.P. Shingledecker, and M.J. Pollard: Metall. Trans. A 2010, 41A, pp. 3032-41.10.1007/s11661-010-0321-4 ↗
2. [2] J.P. Shingledecker, P.J. Maziasz, N.D. Evans, M.L. Santella, and M.J. Pollard: Energy Material, 2006, vol. 1, pp. 25-32.10.1179/174892306X99697 ↗
3. [3] J.P. Shingledecker, P.J. Maziasz, N.D. Evans, M.J. and Pollard: International Journal of Pressure Vessels and Piping, 2007, vol. 84, pp. 21-28.10.1016/j.ijpvp.2006.09.014 ↗
4. [4] J. Barcik: Materials Science and Technology, 1988, vol. 4, pp. 5-15.10.1179/mst.1988.4.1.5 ↗
5. [5] T. Sourmail, Materials Science and Technology, 2001, vol. 17, pp. 1-14.10.1179/026708301101508972 ↗
6. [6] S. Takaki, M. Fujioka, S. Aihara, Y. Nagataki, T. Yamashita, N. Sano, Y. Adachi, M. Nomura, and H. Yaguchi: Materials Transactions, 2004, vol. 7, pp. 2239-44.10.2320/matertrans.45.2239 ↗
7. Z. Zhang, C.T. Liu, M.K. Miller, X.L. Wang, Y. Wen, T. Fujita, A. Hirata, M. Chen, G. Chen G and B.A. Chin: Scientific Reports, 2013, vol. 3, pp. 1-6
8. [8] V.N. Urtsev, D.A. Mirzaev, I.L. Yakovleva, N.A. Tereshchenko, and K.Y. Okishev: The Physics of Metals and Metallography, 2010, vol. 110, pp. 346-55.10.1134/S0031918X10100054 ↗
9. [9] N. Maruyama, M. Sugiyama, T. Hara, H. Tamehiro, Precipitation and Phase Transformation of Copper Particles in Low Alloy Ferritic and Martensitic Steels, Materials Transactions, 1999, vol. 40, pp. 268-77.10.2320/matertrans1989.40.268 ↗
10. R.W. Swindeman, E. Bolling, and C.Y. Li: Symposium during Proceedings, 1990 Pressure Vessels and Piping Conference, Nashville, TN, USA, 1990, pp. 165–77.
11. Q. Wu, J.P. Shingledecker, R.W. Swindeman, and V.K. Vasudevan: Proceedings of the Fourth International Conference on Advances in Materials Technology for Fossil Power Plants. ASM-International, Materials Park, 2005, pp. 748–61.10.31399/asm.cp.am-epri-2004p0748 ↗
12. Y. Sawaragi and S. Hirano: in Mechanical Behavior of Materials, M. Jono and T. Inone, eds., Pergamon Press, London, 1992, pp. 589–94.10.1016/B978-0-08-037890-9.50491-9 ↗
13. [13] C. Chi, H. Yu, J. Dong, W. Liu, S. Cheng, and Z. Liu: Progress in Natural Science: Materials International, 2012, vol. 22, pp. 175-85.10.1016/j.pnsc.2012.05.002 ↗
14. [14] V.T. Ha, W.S. Jung, and J.Y. Suh: Metall. Trans.2011, vol. 42A, pp. 3378-85.10.1007/s11661-011-0752-6 ↗
15. J.P. Shingledecker, P.J. Maziasz, N.D. Evans, and M.J. Pollard: Proceedings from the Materials Science & Technology Conference, Pittsburgh, Pennsylvania, 2005, pp. 129–138.
16. P.J. Maziasz, J.P. Shingledecker, N.D. Evans and M.J. Pollard: Journal of Pressure Vessel Technology, 2009, vol. 131, pp. 051404_1-7.10.1115/1.3141437 ↗
17. P.J. Maziasz and B.A. Pint: Journal of Engineering for Gas Turbines and Power, 2011, vol. 133, pp. 092102_1-5.10.1115/1.4002828 ↗
18. [18] B.A. Pint and I.G. Wright: Materials Science Forum, 2004, vol. 461-164, pp.799-806.10.4028/www.scientific.net/MSF.461-464.799 ↗
19. [19] R. Peraldi and B.A. Pint: Oxid. Met., 2004, vol. 61, pp. 463-83.10.1023/B:OXID.0000032334.75463.da ↗
20. [20] D.J. Young, High Temperature Oxidation and Corrosion of Metals, Elsevier Science, The Netherlands, 2008.
21. [21] D.J. Young, A. Chyrkin, and W.J. Quadakkers: Oxid. Met., 2012, vol. 77, pp. 252-64.10.1007/s11085-012-9283-9 ↗
22. [22] E.J. Opila: Mat. Sci. Forum, 2004, vol. 461-464, pp. 765-74.10.4028/www.scientific.net/MSF.461-464.765 ↗
23. [23] H. Asteman, J.E. Svensson, M. Norell, and L.G. Johansson: Oxidation of Metals, 2000, vol. 54, pp. 11-26.10.1023/A:1004642310974 ↗
24. [24] H. Hughes: J. Iron Steel Inst., 1967, vol. 205, pp. 775-78.
25. [25] P.W. Robinson and D.H. Jack: J. Heat Treating, 1985, vol. 4, pp. 69-74.10.1007/BF02835491 ↗
26. [26] V. Vodárek: Scrip. Metall. Mat., 1991, vol. 25, pp. 549-52.10.1016/0956-716X(91)90089-J ↗
27. [27] J.M. Silcock, D. Raynor, and G. Willoughby: Metal Science, 1977, vol. 11, pp. 551-62.10.1179/msc.1977.11.12.551 ↗
28. H.I. Aaronson, J.K. Lee, and K.C. Russel: Precipitation Processes in Solids, Met. Soc. A.I.M.E New York, 1978, p. 31.
29. S. Dryepondt, B.A. Pint, and P.J. Maziasz: Front. Mater., 2015, pp. 1–13.
30. [30] A. Raghavan, C.F. Klein, and C.N. Marzinsky: Metall. Trans. A, 1992, 23A, pp. 2455-2467.
31. P.J. Maziasz, J.P. Shingledecker, N.D. Evans, and M.J. Pollard: Journal of Pressure Vessel Technology, 2009, vol. 131, pp. 051404_1-710.1115/1.3141437 ↗
32. [32] J.W. Bai, P.P. Liu, Y.M. Zhu, X.M. Li, C.Y. Chi, H.Y. Yu, X.S. Xie, and Q. Zhan: Materials Science and Engineering A, 2003, vol. 584, pp. 57-62.10.1016/j.msea.2013.06.082 ↗