journal article·2015-01

Fracture Resistance of a Zirconium Alloy with Reoriented Hydrides

Kwai S. Chan, Xihua He, Yi-Ming Pan

Publisher page

Abstract

Zirconium alloy cladding materials typically contain circumferential hydrides that may be reoriented to align along the radial direction when the cladding tubes are heated above and then cooled below the solvus temperature. The objectives of this study were to investigate the critical stress levels required to cause hydride reorientation (HRT) and to characterize the fracture resistance of Zircaloy-2 after hydride reorientation. HRT heat-treatment was performed on hydrogen-charged Zircaloy-2 specimens at 593 K (320 °C) or 623 K (350 °C) for 1 to 2 hours, followed by cooling to 473 K (200 °C). Fracture testing was conducted on hydride-reoriented three-point bend specimens at 473 K (200 °C) using an in situ loading stage inside a scanning electron microscope. Direct observations indicated that the reoriented hydrides, which ranged from ≈1 to 22 μm in lengths, were more prone to fracture at larger sizes (>10 μm) compared to smaller sizes (<0.5 μm). The reoriented hydrides reduced fracture resistance through a void nucleation, growth, and coalescence process at the crack tip. The resulting crack-resistance curves for Zircaloy-2 with reoriented hydrides decrease from 38 to 21 MPa(m)1/2 with increasing hydrogen contents from 51 to 1265 wt ppm hydrogen.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Nuclear and radioactivity studies · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. R.L. Sindelar, A.J. Duncan, M.E. Dupont, P.-S. Lam, M.R. Louthan Jr., and T.E. Skidmore: SRNL-STI-2011-00005, May 2011.
2. B. Hanson, H. Alsaed, C. Stockman, D. Enos, R. Meyer, and K. Sorenson: Department of Energy, FCRD-USED-2011-000136, June 30, 2011.
3. NWTRB: in Evaluation of the Technical Basis for Extended Dry Storage and Transportation of Used Nuclear Fuel, U.S. Nuclear Waste Technical Review Board, December 2010.
4. Electric Power Research Institute: Extended Storage Collaboration Program (ESCP): Progress Report and Review of Gap Analysis, EPRI 1022914, Palo Alto, CA, 2011.
5. R.E. Einziger, C.L. Brown, G.P. Hornseth, and C.G. Interrante: Radwaste Solutions, March/April, 2005, pp. 44–56.
6. H.M. Chung: in International Meeting on LWR Fuel Performance, Orlando, FL, September 19–22, 2004, Paper No. 1064.
7. C. Ferry and C. Poinssot: in Presentation at the CEA-NRC Meeting, February 7, 2005, Washington, DC, 2005.
8. H.C. Chu, S.K. Wu, and R.C. Kuo, J. Nucl. Mater. Vol. 373, 2008, pp. 319-327.10.1016/j.jnucmat.2007.06.012 ↗
9. R.S. Daum, S. Majumdar, Y. Liu, and M.C. Bilone, J. Nucl. Sci. and Techn., Vol. 43, 2006, pp. 1054-1067.10.1080/18811248.2006.9711195 ↗
10. M. Aomi, T. Baba, T. Miyashita, K. Kamimura, T. Yasuda, Y. Shinihara, and T. Takeda: J. ASTM Int., 2008, vol. 5(9), pp. 1–21.10.1520/JAI101262 ↗
11. K.B. Colas, A.T. Motta, J.D.Almer, M.R.Daymond, M.Kerr, A.D. Banchik, P. Vizcaino, and J.R. Santisteban, Acta Mater. Vol. 58, 2010, pp. 6575-6583.10.1016/j.actamat.2010.07.018 ↗
12. G. Ledergerber, S. Abolhassani, M. Limback, R.J. Lundmark, and K.-A. Magnusson, J. Nucl. Sci. and Techn. Vol. 43, No. 9, 2006, pp. 1006-1014.10.1080/18811248.2006.9711189 ↗
13. S. Valance, J. Bertsch, and A.M. Alam, J. ASTM Int., Vol. 8(1), pp. 1-14, 2011.10.1520/JAI102957 ↗
14. K. Sakamoto and M. Nakatsuka, J. Nucl. Sci. and Techn., Vol. 43, 2006, pp. 1136-1141.10.1080/18811248.2006.9711205 ↗
15. K.S. Chan, International Materials Review, Vol. 58, 2013, pp. 349-373..10.1179/1743280412Y.0000000013 ↗
16. D. Broek, Elementary Engineering Fracture Mechanics.” Sijthoff & Noordhoff, Alphen aan den Rijn, 1978, p. 122.
17. X. He, Y. Pan, and K.S. Chan: in Proceedings of NACE Corrosion 2013, Orlando, FL, March 17–21, 2013, Paper No. 2257, pp. 1–17.10.5006/C2013-02257 ↗
18. M. Steinbrück, Journal of Nuclear Materials. Vol. 334, 2004, pp. 58–64.10.1016/j.jnucmat.2004.05.007 ↗
19. A. Nagy, J.B. Campbell and D. L Davidson, Rev. Sci. Instrum., Vol. 55, 1984, pp. 778–782.10.1063/1.1137816 ↗
20. Chan, K.S., Experimental Mechanics, Vol. 52, 2012, pp. 1251-1265.10.1007/s11340-011-9587-8 ↗
21. ASTM Standard E-399-90, Annual Book of ASTM Standards, Section 3, vol. 03.01, pp. 422–52, 1997, ASTM International, East Conshohocken, PA.
22. S. Suresh, and C.F. Shih, International J. of Fracture. Vol. 30, 1986, pp. 237–259.10.1007/BF00019705 ↗
23. D. Broek, “Elementary Engineering Fracture Mechanics.” Sijthoff & Noordhoff, Alphen aan den Rijn, 1978, p. 92.
24. A. Glendening, D.A. Koss, A.T. Motta, O.N. Peirron, and R.S. Daum: J. ASTM Int., vol. 2(6), 2005, 399-414.10.1520/JAI12441 ↗
25. S. Q. Shi and M.P. Puls, J. Nucl. Mater. Vol. 208, 1994, pp. 232-242.10.1016/0022-3115(94)90332-8 ↗
26. S.Q. Shi, M.P. Puls, and S. Sagat, J. Nucl. Mater. Vol. 208, 1994, pp. 243-250.10.1016/0022-3115(94)90333-6 ↗
27. S. Q. Shi and M.P. Puls: J. Nucl. Mater. Vol. 275, 1999, pp. 312-317.10.1016/S0022-3115(99)00132-4 ↗
28. L.A. Simpson, C.D. Cann: J. Nucl. Mater., Vol. 87, 1979, pp. 303-316.10.1016/0022-3115(79)90567-1 ↗
29. F.H. Huang and W.J. Mills: Metall. Trans. A Vol. 22A, 1991, pp. 2049–60.10.1007/BF02669872 ↗
30. Y.S. Kim, S.S. Kim, S.C. Kwon, K.S. Im, and Y.M. Cheong: Metallurgical and Materials Transactions A, Vol. 33A, 2002, pp. 919-925.10.1007/s11661-002-1024-2 ↗
31. K. Petterson, K. Kese, and P. Efsing: in Ninth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, F.P. Ford, S.M. Bruemmer, and G.S. Was, eds., Newport Beach, California, August 1–9, 1999, The Minerals, Metals & Materials Society, Warrendale, PA, 1999, pp. 1201–09.10.1002/9781118787618.ch127 ↗
32. K.S. Chan: J. Nucl. Mater., Vol. 227, 1996, pp. 220-236.10.1016/0022-3115(95)00160-3 ↗
33. M. Kerr, M.R. Daymond, R.A. Holt, J.D. Almer, and S. Stafford: Scripta Mater., Vol. 62, 2010, pp. 341-344.10.1016/j.scriptamat.2009.10.031 ↗
34. M. Kerr, M.R. Daymond, R.A. Holt, J.D. Almer, S. Stafford, and K.B. Colas: Scripta Mater., Vol 61, 2009, pp. 939-942.10.1016/j.scriptamat.2009.07.030 ↗
35. M. Kerr, M.R. Daymond, R.A. Holt, and J.D. Almer: J. of Nuclear Mater., Vol. 380, 2008, pp. 70-75.10.1016/j.jnucmat.2008.07.004 ↗
36. K-F. Nilsson, N. Jaksic, and V. Vokal: J. Nucl. Mater., Vol. 396, 2010, pp. 71-85.10.1016/j.jnucmat.2009.10.056 ↗
37. Y. S. Kim: J. Nucl. Mater., Vol. 378, 2008, pp. 30-34.10.1016/j.jnucmat.2008.04.011 ↗