In Situ Observation of High Temperature Creep Behavior During Annealing of Steel
Source abstract
Abstract
Previous studies on creep suggested a close relationship between polycrystal grain size, substructure, and creep rate. At present, however, our understanding of the influence of polycrystal grain size, substructure, and thermal stress on creep deformation behavior seems rather insufficient, especially as there is a general lack of in situ data on structural changes during creep. In this study, the effects of thermal stress, austenite grain size, and cooling rate on slip deformations in C–Mn–Al steel during annealing were investigated systematically on the basis of in situ observations using high temperature laser scanning confocal microscopy. Finally, a kinetics model based on thermal expansion anisotropy and temperature difference was developed to explain these interesting experimental results. The in situ investigation of slip deformation during annealing greatly contributes to the understanding of high temperature creep behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. B. Wilshire: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 241–48.10.1007/s11661-002-0086-5 ↗
2. M.A. Meyers and K.K. Chawla: Mechanical Behavior of Materials, 1st ed., Cambridge University Press, Cambridge, 2009, pp. 653–82.
3. S. Takeuchi and A.S. Argon: J. Mater. Sci., 1976, vol. 11, pp. 1542–66.10.1007/BF00540888 ↗
4. R.S. Kottada and A.H. Chokshi: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1743–49.10.1007/s11661-007-9190-x ↗
5. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. ASM, 1969, vol. 62, pp. 155–79.
6. H. Chokshi, A.K. Mukherjee, and T.G. Langdon: Mater. Sci. Eng. R, 1993, vol. R10, pp. 237–74.10.1016/0927-796X(93)90009-R ↗
7. G. Malakondaiah and P.R. Rao: Def. Sci. J., 1985, vol. 35, pp. 201–17.10.14429/dsj.35.6009 ↗
8. T.A. Hayes, M.E. Kassner, and R.S. Rosen: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 337–43.10.1007/s11661-002-0095-4 ↗
9. B. Wilshire and C.J. Palmer: Scripta Mater., 2002, vol. 46, pp. 483–88.10.1016/S1359-6462(01)01247-7 ↗
10. G.D. Gemmell and N.J. Grant: Trans. AIME, 1957, vol. 209, pp. 417–23.
11. J.W. Kelly and R.C. Gifkins: J. Inst. Metals, 1953–1954, vol. 82, pp. 475–80.
12. H.C. Chang and N.J. Grant: Trans. AIME, 1952, vol. 194, pp. 619–25.
13. V.P. Gupta and P.R. Strutt: Can. J. Phys., 1967, vol. 45, pp. 1213–20.10.1139/p67-089 ↗
14. T. Hasegawa, S. Karashima, and R. Hasegawa: Metall. Trans., 1971, vol. 2, pp. 1449–55.10.1007/BF02913374 ↗
15. Y. Komizo and H. Terasaki: Sci. Technol. Weld. Join., 2011, vol. 16, pp. 56–60.10.1179/136217110X12785889549868 ↗
16. X.F. Zhang, H. Terasaki, and Y. Komizo: Philos. Mag. Lett., 2011, vol. 91, pp. 491–97.10.1080/09500839.2011.587464 ↗
17. K. Ishida and T. Nishizawa: Trans. Jpn. Inst. Met., 1974, vol. 5, pp. 225–31.10.2320/matertrans1960.15.225 ↗
18. Y. Wadeda and M. Isshiki: Purification Process and Characterization of Ultra High Purity Metals, 1st ed., Springer, Berlin, 2002, p. 320.
19. A.F. Gourgues-Lorenzon: Int. Mater. Rev., 2007, vol. 52, pp. 65–128.10.1179/174328007X160254 ↗
20. S.I. Wright, J.F. Bingert, T.A. Mason, and R.J. Larsen: Mater. Sci. Forum, Proceedings of ICOTOM 13, Seoul, South Korea, August 26–30, 2002.
21. R.W. Cahn and P. Haasen: Physical Metallurgy, Fourth revised and enhanced edition, Elsevier Science B.V., 1996, pp. 1912–13.
22. X.W. Li, Z.G. Wang, G.Y. Li, S.D. Wu, and S.X. Li: Acta Mater., 1998, vol. 46, pp. 4497–4505.10.1016/S1359-6454(98)00151-7 ↗
23. L. Li: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7178–85.10.1016/j.msea.2011.05.058 ↗
24. D. Kuhlmann-Wilsdorf: Acta Mater., 1999, vol. 47, pp. 1697–1712.10.1016/S1359-6454(98)00413-3 ↗
25. N.F. Mott: Proc. Phys. Soc. B, 1951, vol. 64, pp. 729–42.10.1088/0370-1301/64/9/301 ↗
26. R.W. Davidge: Acta Metall., 1981, vol. 29, pp. 1695–1702.10.1016/0001-6160(81)90004-3 ↗
27. A.G. Evans: Acta Metall., 1978, vol. 26, pp. 1845–53.10.1016/0001-6160(78)90097-4 ↗
28. C.H. Hsueh and P.F. Becher: J. Mater. Sci. Lett., 1991, vol. 10, pp. 1165–67.10.1007/BF00744115 ↗
29. Q. Ma and D.R. Clarke: J. Am. Ceram. Soc., 1994, vol. 77, pp. 298–302.10.1111/j.1151-2916.1994.tb06996.x ↗
30. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, 1st ed., Pergamon Press, Oxford, 1982, pp. 1–166.
31. W.D. Nix, J.C. Gibeling, and D.A. Hughes: Metall. Trans. A, 1985, vol. 16A, pp. 2215–26.10.1007/BF02670420 ↗
32. R. Raj and M.F. Ashby: Metall. Trans., 1971, vol. 2, pp. 1113–27.10.1007/BF02664244 ↗
33. J.J. Barnes, J.G. Goedjen, and D.A. Shores: Oxid. Met., 1989, vol. 32, pp. 449–69.10.1007/BF00665449 ↗
34. J.H. Stout, D.A. Shores, J.G. Goedjen, and M.E. Armacanqui: Mater. Sci. Eng. A, 1989, vol. 120, pp. 193–97.10.1016/0921-5093(89)90739-9 ↗