Effects of Reinforcements on Creep Resistance of Hybrid-Reinforced Titanium Matrix Composites
Source abstract
Abstract
Hybrid-reinforced titanium matrix composites (TMCs) were in-situ synthesized by common casting and hot-working technologies. High-temperature creep behavior of the matrix titanium alloy and composites was tested at 873, 923, and 973 K in the stress range from 20 to 300 MPa. Depending on the stress levels, creep behavior of the matrix alloy and composites was divided into two stress regions. Creep resistance of the composites was significantly enhanced by the reinforcements. Threshold stresses and stress transfer effects were introduced to explain the enhancement of creep resistance. In most cases, high volume fractions of reinforcements caused a deleterious effect on the creep resistance of composites. On the other hand, types and morphologies of reinforcements were the dominant factor contributing to the enhancement of creep resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. F.H. Froes, C. Suryanarayana, and D. Eliezer: J. Mater. Sci., 1992, vol. 27, pp. 5113–40.10.1007/BF02403806 ↗
2. T. Saito: JOM, 2004, vol. 56, pp. 33–36.10.1007/s11837-004-0125-3 ↗
3. S. Ranganath: J. Mater. Sci., 1997, vol. 32, pp. 1–16.
4. Z.F. Yang, W.J. Lu, L. Zhao, J.Q. Lu, J.N. Qin, and D. Zhang: Mater. Lett., 2007, vol. 61, pp. 2368–73.10.1016/j.matlet.2006.09.014 ↗
5. S.C. Tjong and Y.W. Mai: Compos. Sci. Technol., 2008, vol. 68, pp. 583–601.10.1016/j.compscitech.2007.07.016 ↗
6. S.C. Tjong and Z.Y. Ma: Mater. Sci. Eng. R, 2000, vol. 29, pp. 49–113.10.1016/S0927-796X(00)00024-3 ↗
7. B.V.R. Bhat, J. Subramanyam, and V.V.B. Prasad: Mater. Sci. Eng. A, 2002, vol. 325, pp. 126–30.10.1016/S0921-5093(01)01412-5 ↗
8. W.J. Lu, D. Zhang, X.N. Zhang, and R.J. Wu: Scripta Mater., 2001, vol. 44, pp. 1069–75.10.1016/S1359-6462(01)00663-7 ↗
9. Z.Y. Ma, S.C. Tjong, and L. Gen: Scripta Mater., 2000, vol. 42, pp. 367–73.10.1016/S1359-6462(99)00354-1 ↗
10. S.M.L. Sastry, P.J. Meschter, and J.E. O’Neal: Metall. Trans. A, 1984, vol. 15A, pp. 1451–63.10.1007/BF02648575 ↗
11. Z.Y. Ma, R.S. Mishra, and S.C. Tjong: Acta Mater., 2002, vol. 50, pp. 4293–4302.10.1016/S1359-6454(02)00261-6 ↗
12. H.T. Tsang, C.G. Chao, and C.Y. Ma: Scripta Mater., 1997. vol. 37, pp. 1359–65.10.1016/S1359-6462(97)00251-0 ↗
13. S. Ranganath and R.S. Mishra: Acta Mater., 1996, vol. 44, pp. 927–35.10.1016/1359-6454(95)00242-1 ↗
14. Z.Y. Ma, S.C. Tjong, and S.X. Li: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1019–22.10.1007/s11661-001-0359-4 ↗
15. S.J. Zhu, D. Mukherji, W. Chen, Y.X. Lu, Z.G. Wang, and R.P. Wahi: Mater. Sci. Eng. A, 1998, vol. 256, pp. 301–07.10.1016/S0921-5093(98)00617-0 ↗
16. Z.Y. Ma, S.C. Tjong, and X.M. Meng: J. Mater. Res., 2002, vol. 17, pp. 2307–12.10.1557/JMR.2002.0338 ↗
17. Z.F. Yang, W.J. Lu, J.N. Qin, and D. Zhang: Mater. Sci. Eng. A, 2006, vol. 425, pp. 185–91.10.1016/j.msea.2006.03.063 ↗
18. K. Geng, W.J. Lu, and D. Zhang: Mater. Sci. Eng. A, 2003, vol. 360, pp. 176–82.10.1016/S0921-5093(03)00437-4 ↗
19. M.M. Wang, W.J. Lu, and J.N. Qin, B. Ji, and D. Zhang: Mater. Des., 2006, vol. 27, pp. 494–98.10.1016/j.matdes.2004.11.030 ↗
20. L. Xiao, W.J. Lu, Z.F. Yang, J.N. Qin, D. Zhang, M.M. Wang, F. Zhu, and B. Ji: Mater. Sci. Eng. A, 2008, vol. 491, pp. 192–98.10.1016/j.msea.2008.01.077 ↗
21. L. Xiao, W.J. Lu, J.N. Qin, Y.F. Chen, D. Zhang, M.M. Wang, F. Zhu, and B. Ji: Mater. Sci. Eng. A, 2009, vol. 499, pp. 500–06.10.1016/j.msea.2008.09.002 ↗
22. L. Xiao, W.J. Lu, J.N. Qin, Y.F. Chen, D. Zhang, M.M. Wang, F. Zhu, and B. Ji: Compos. Sci. Technol., 2009, vol. 69, pp. 1925–31.10.1016/j.compscitech.2009.04.009 ↗
23. P. Villars, A. Prince, and H. Okamoto: Handbook of Ternary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1995.
24. L. Lagneborg and B. Bergman: Met. Sci., 1997, vol. 10, pp. 20–28.10.1179/030634576790431462 ↗
25. E. Arzt and M.F. Ashby: Scripta Metall., 1982, vol. 16, pp. 1285–90.10.1016/0036-9748(82)90484-7 ↗
26. F.A. Mohamed, K.T. Park, and E.J. Lavernia: Mater. Sci. Eng. A, 1992, vol. 150, pp. 21–35.10.1016/0921-5093(90)90004-M ↗
27. J. Rosler and E. Arzt: Acta Metall. Mater., 1990, vol. 38, pp. 671–83.10.1016/0956-7151(90)90223-4 ↗
28. A. Pichler and E. Arzt: Acta Mater., 1996, vol. 44, pp. 2751–58.10.1016/1359-6454(95)00383-5 ↗
29. D.C. Dunand and A.M. Jansen: Acta Mater., 1997, vol. 45, pp. 4569–81.10.1016/S1359-6454(97)00135-3 ↗
30. R.S.W. Shewfelt and L.M. Brown: Phil. Mag., 1977, vol. 35, pp. 945–62.10.1080/14786437708232636 ↗
31. Y. L and T.G. Langdon: Acta Mater., 1999, vol. 47, pp. 3395–403.10.1016/S1359-6454(99)00219-0 ↗
32. R.C. Gifkins: Metall. Trans. A, 1976, vol. 7A, pp. 1225–32.10.1007/BF02656607 ↗
33. M.E. Kassner and M.T. Perez-Prado: Prog. Mater. Sci., 2000, vol. 45, pp. 1–102.10.1016/S0079-6425(99)00006-7 ↗
34. S. Gollapudi, I. Charit, and K.L. Murty: Acta Mater., 2008, vol. 56, pp. 2406–19.10.1016/j.actamat.2008.01.052 ↗
35. D.V. Kolluru and T.M. Pollock: Acta Mater., 1998, vol. 46, pp. 2859–76.10.1016/S1359-6454(97)00454-0 ↗
36. R. Fernandez and G. Gonzalez-Doncel: Acta Mater., 2008, vol. 56, pp. 2549–62.10.1016/j.actamat.2008.01.037 ↗
37. B.Q. Han and T.G. Langdon: Mater. Sci. Eng. A, 2002, vol. 322, pp. 73–78.10.1016/S0921-5093(01)01119-4 ↗
38. Y. Li and T.G. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2523–31.10.1007/s11661-998-0224-9 ↗
39. K.T. Park and F.A. Mohamed: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3119–29.10.1007/BF02669441 ↗
40. H.L. Cox: Br. J. Appl. Phys., 1952, vol. 3, pp. 72–79.10.1088/0508-3443/3/3/302 ↗
41. L. Xiao, W.J. Lu, J.N. Qin, D. Zhang, M.M. Wang, F. Zhu, and J. Ji: J. Mater. Res., 2008, vol. 23, pp. 3066–74.10.1557/jmr.2008.0378 ↗
42. T. Morimoto, T. Yamaoka, H. Lilholt, and M. Taya: J. Eng. Mater. Technol., 1988, vol. 110, pp. 70–76.10.1115/1.3226032 ↗