journal article·2012-02

Liquid–Solid Reactions and Microstructure of SiC-5120 Steel Composite Brake Material

Jingyang Li, Hongqiang Ru, Hong Yang, Yinong Liu

Publisher page

Abstract

This study investigated solid–liquid reactions between SiC preform and molten 5120 steel during infiltration casting of SiC-steel composite for heavy duty brake applications. The reactions between SiC and the molten steel resulted in the formation of three distinctive microstructural regions, including the α 1-Fe(Si)-graphite region, the pearlite region, and the ferrite-pearlite region. The phase structures were identified by means of X-ray diffraction, X-ray energy dispersive spectrometry, and metallographic examination. These observations reveal that SiC was decomposed via reactions with the molten steel. The diffusion of C and Si into the molten steel and selective solidification led to the formation of different regions with varied C and Si contents. The microstructures produced during the solidification sequence are identified to be the ferrite-pearlite → pearlite → α 1-Fe(Si) + graphite and cementite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Brake Systems and Friction Analysis · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. C. Azar, K. Lindgren, and B.A. Andersson: Energ. Policy, 2003, vol. 31, pp. 961-76.10.1016/S0301-4215(02)00139-8 ↗
2. G. de Rus and V. Inglada: Ann. Reg. Sci., 1997, vol. 31, pp. 175–88.10.1007/s001680050044 ↗
3. S. Zhang, Y. Li, S. Qu, and W. Chen: Tribol. Lett., 2010, vol. 38, pp. 135-46.10.1007/s11249-010-9582-8 ↗
4. J. Wahlström, L. Olander, and U. Olofsson: Tribol. Lett., 2010, vol. 38, pp. 15-24.10.1007/s11249-009-9564-x ↗
5. M. Tirovic and G. Ali: P. I. Mech. Eng. F-J. Rai., 2001, vol. 215, pp. 101-09.10.1243/0954409011531431 ↗
6. M. Tirovic: P. I. Mech. Eng. F-J. Rai., 1998, vol. 212, pp. 113-21.10.1243/0954409981530724 ↗
7. S. Panier, P. Dufrénoy, and D. Weichert: Wear, 2004, vol. 256, pp. 764-73.10.1016/S0043-1648(03)00459-9 ↗
8. Y. Desplanques, O. Roussette, G. Degallaix, R. Copin, and Y. Berthier: Wear, 2007, vol. 262, pp. 582-91.10.1016/j.wear.2006.07.004 ↗
9. Y. Desplanques, G. Degallaix, R. Copin, and Y. Berthier: A Tribometer for the Study of Materials under Railway Braking Conditions, Elsevier, Atlanta, GA, 2001, pp. 389-91.
10. J.D. Guérin, J.P. Bricout, K. Laden, and M. Watremez: Tribol. Lett., 1997, vol. 3, pp. 257-67.10.1023/A:1019137323309 ↗
11. M. Kermc, M. Kalin, and J. Vizintin: Wear, 2005, vol. 259, pp. 1079-87.10.1016/j.wear.2004.12.002 ↗
12. I.M. Hutchings: Mater. Sci. Eng. A, 1994, vol. 184, pp. 185-95.10.1016/0921-5093(94)91031-6 ↗
13. M.A. Pickering, R.L. Taylor, J.T. Keeley, and G.A. Graves: Nucl. Instrum. Meth. A, 1990, vol. 291, pp. 95-100.10.1016/0168-9002(90)90040-D ↗
14. D.R. Lide: Handbook of Chemistry and Physics, CRC Press/Taylor and Francis, Boca Raton, FL, 2009, pp. 4.68, 5.3–64.
15. M.A. Taha: Mater. Des., 2001, vol. 22, pp. 431-41.10.1016/S0261-3069(00)00077-7 ↗
16. W.C. Harrigan: Mater. Sci. Eng. A, 1998, vol. 244, pp. 75-79.10.1016/S0921-5093(97)00828-9 ↗
17. C.C. Ting and J. Anne: J. Am. Ceram. Soc., 1991, vol. 74, pp. 1364-72.10.1111/j.1151-2916.1991.tb04113.x ↗
18. D.F. Johnson and E.A. Carter: J. Phys. Chem. A, 2009, vol. 113, pp. 4367-73.10.1021/jp8110259 ↗
19. W.M. Tang, Z.X. Zheng, H.F. Ding, and Z.H. Jin: Mater. Chem. Phys., 2003, vol. 80, pp. 360-65.10.1016/S0254-0584(02)00521-7 ↗
20. W.M. Tang, Z.X. Zheng, H.F. Ding, and Z.H. Jin: Mater. Chem. Phys., 2002, vol. 74, pp. 258-64.10.1016/S0254-0584(01)00480-1 ↗
21. E. Rabkin, B. Straumal, V. Semenov, W. Gust, and B. Predel: Acta Metall. Mater., 1995, vol. 43, pp. 3075-83.10.1016/0956-7151(95)00015-N ↗
22. A. Gude and H. Mehrer: Philos. Mag. A, 1997, vol. 76, pp. 1-29.10.1080/01418619708209959 ↗
23. H. Baker: ASM Handbook Volume 3, Alloy Phase Diagram, ASM International, Materials Park, OH, 1992, pp. 2.110, 2.113, 2.203.
24. M. Mizuno, I. Tanaka, and H. Adachi: Philos. Mag. B, 1997, vol. 75, pp. 237-48.10.1080/13642819708202312 ↗
25. M. Umemoto, Z.G. Liu, K. Masuyama, and K. Tsuchiya: Scripta Mater., 2001, vol. 45, pp. 391-97.10.1016/S1359-6462(01)01016-8 ↗
26. E. Heikinheimo, A.A. Kodentsov, and F.J.J. van Loo: Scripta Mater., 1998, vol. 38, pp. 1229–35.10.1016/S1359-6462(98)00023-2 ↗
27. J. Chipman: Metall. Trans., 1972, vol. 3, pp. 55-64.10.1007/BF02680585 ↗
28. W.F. Holbrook, C.C. Furnas, and T.L. Joseph: Ind. Eng. Chem., 1932, vol. 24, pp. 993-98.10.1021/ie50273a007 ↗
29. D.W. Morgan and J.A. Kitchener: Trans. Faraday Soc., 1954, vol. 50, pp. 51-60.10.1039/tf9545000051 ↗