journal article·2014-06

Influence of the Carbo-Chromization Process on the Microstructural, Hardness, and Corrosion Properties of 316L Sintered Stainless Steel

Sorin Iorga, Mihai Cojocaru, Adriana Chivu, Sorin Ciuca, Mihail Burdusel, Petre Badica, Cédric Leuvrey, Guy Schmerber, Corinne Ulhaq-Bouillet, Silviu Colis

Publisher page

Abstract

We report on the changes on the microstructural, hardness, and corrosion properties induced by carbo-chromization of 316L stainless steel prepared by Spark Plasma Sintering technique. The thermo-chemical treatments have been performed using pack cementation. The carburizing and chromization were carried out between 1153 K (880 °C)/4 h to 1253 K (980 °C)/12 h and 1223 K (950 °C)/6 h to 1273 K (1000 °C)/12 h in a solid powder mixture of charcoal/BaCO3 and ferrochromium/alumina/NH4Cl, respectively. The obtained layers were investigated using X-ray and electron diffraction, optical and scanning electron microscopies, Vickers micro-hardness, and potentiodynamic measurements. The thickness of the carbo-chromized layer ranges between 300 and 500 μm. Besides the host γ-phase, the layers are mainly constituted of carbides (Fe7C3, Cr23C6, Cr7C3, and Fe3C) and traces of α′-martensite. The average hardness values decrease smoothly from 650 HV at the sample surface down to 200 HV at the center of the sample. The potentiodynamic tests revealed that the carbo-chromized samples have smaller corrosion resistance with respect to the untreated material. For strong chromization regimes, the corrosion rate is increased by a factor of four with respect to that of the untreated material, while the micro-hardness of the layer is three times larger. Such materials are suited to be used in environments where good corrosion resistance and wear properties are required.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. S.B. Lee, K.H. Cho, W.G. Lee, and H. Jang: J. Power Sources, 2009, vol. 187, pp. 318-23.10.1016/j.jpowsour.2008.11.064 ↗
2. M.M. Dewidar, H.C. Yoon, and J.K. Lim: Met. Mater. Int., 2006, vol. 12, pp. 193-206.10.1007/BF03027531 ↗
3. R. Orru, R. Licheri, A.M. Locci, A. Cincotti, and G. Cao: Mater. Sci. Eng. R, 2009, vol. 63, pp. 127-287.10.1016/j.mser.2008.09.003 ↗
4. M. Burdusel, G. Aldica, S. Popa, M. Enculescu, and P. Badica: J. Mater. Sci., 2012, vol. 47, pp. 3828-36.10.1007/s10853-011-6238-5 ↗
5. J.M. Frei, U. Anselmi-Tamburini, and Z.A. Munir: J. Appl. Phys., 2007, vol. 101, pp. 114914.10.1063/1.2743885 ↗
6. Z. Xu, C. Jia, C. Kuang, K. Chu, and X. Qu: J. Alloys Compd., 2009, vol. 484, pp. 924-28.10.1016/j.jallcom.2009.05.075 ↗
7. H. Ni, H. He, G. Li, and J. Liu: J. Iron and Steel Research, International, 2008, vol. 15, pp. 73-76.10.1016/S1006-706X(08)60147-8 ↗
8. J.W. Lee and J.G. Duh: Surf. Coat. Technol., 2004, vol. 177-178, pp. 525-31.10.1016/j.surfcoat.2003.08.031 ↗
9. S. Iorga, S. Ciuca, C. Leuvrey, and S. Colis: J. Alloys Compd., 2012, vol. 512, pp. 100-04.10.1016/j.jallcom.2011.09.030 ↗
10. D. Zeng, S. Yang, and Z.D. Xiang: Appl. Surf. Sci., 2012, vol. 258, pp. 5175-78.10.1016/j.apsusc.2012.01.167 ↗
11. M.B. Karamiş and R. Ipek: Appl. Surf. Sci., 1997, vol. 119, pp. 25-33.10.1016/S0169-4332(97)00173-6 ↗
12. S.Y. Lee, G.S. Kim, and B.S. Kim: Surf. Coat. Technol., 2004, vol. 177-178, pp. 178-84.10.1016/j.surfcoat.2003.07.009 ↗
13. F.A.P. Fernandes, S.C. Heck, C.A. Picon, G.E. Totten, and L.C. Casteletti: Surf. Eng., 2012, vol. 28, pp. 313-17.10.1179/1743294411Y.0000000079 ↗
14. K.H. Cho, W.G. Lee, S.B. Lee, and H. Jang: J. Power Sources, 2008, vol. 178, pp. 671-76.10.1016/j.jpowsour.2007.09.031 ↗
15. K.A. Khor, L.G. Yu, O. Andersen, and G. Stephani: Mater. Sci. Eng. A, 2003, vol. 356, pp. 130-35.10.1016/S0921-5093(03)00111-4 ↗
16. D. Oleszak, A. Grabias, M. Pekała, A. Świderska-Środa, and T. Kulik: J. Alloys Compd., 2007, vol. 434435, p. 3403.
17. L. Yang, H. Yu, L. Jiang, L. Zhu, X. Jian, and Z. Wang: J. Power Sources, 2010, vol. 195, pp. 2810-14.10.1016/j.jpowsour.2009.11.018 ↗
18. C.Y. Bai, T.M. Wen, K.H. Hou, and M.D. Ger: J. Power Sources, 2010, vol. 195, pp. 779-86.10.1016/j.jpowsour.2009.08.036 ↗
19. C.Y. Wei and F.S. Chen: Mater. Chem. Phys., 2005, vol. 91, pp. 192-99.10.1016/j.matchemphys.2004.11.010 ↗
20. J.W. Lee, J.G. Duh, and S.Y. Tsai: Surf. Coat. Technol., 2002, vol. 153, pp. 59-66.10.1016/S0257-8972(01)01546-8 ↗
21. Y. Cao, F. Ernst, and G.M. Michal: Acta Materialia, 2003, vol. 51, pp. 4171-81.10.1016/S1359-6454(03)00235-0 ↗
22. G.M. Michal, F. Ernst, H. Kahn, Y. Cao, F. Oba, N. Agarwal, and A.H. Heuer: Acta Mater., 2006, vol. 54, pp. 1597-606.10.1016/j.actamat.2005.11.029 ↗
23. M. Detroye, F. Reniers, C. Buess-Herman, and J. Vereecken: Appl. Surf. Sci., 1997, vol. 120, pp. 85-93.10.1016/S0169-4332(97)00228-6 ↗
24. Z.B. Wang, J. Lu, and K. Lu: Acta Mater., 2005, vol. 53, pp. 2081-89.10.1016/j.actamat.2005.01.020 ↗
25. C.Y. Bai, T.M. Wen, K.H. Hou, N.W. Pu, and M.D. Ger: Int. J. Hydrogen Energy, 2011, vol. 36, pp. 3975-83.10.1016/j.ijhydene.2010.12.110 ↗
26. J.G. Molleja, L. Nosei, J. Ferrón, E. Bemporad, J. Lesage, D. Chicot, and J. Feugeas: Surf. Coat. Technol., 2010, vol. 204, pp. 3750-59.10.1016/j.surfcoat.2010.04.036 ↗
27. K. Farrell, E.D. Specht, J. Pang, L.R. Walker, A. Rar, and J.R. Mayotte: J. Nucl. Mater., 2005, vol. 343, pp. 123-33.10.1016/j.jnucmat.2004.10.169 ↗
28. R.W. Cahn: Physical Metallurgy, American Elsevier Publ. Company, New York, 1970.
29. A. Das and S. Tarafder: Int. J. Plasticity, 2009, vol. 25, pp. 2222-47.10.1016/j.ijplas.2009.03.003 ↗
30. M. Smaga, F. Walther, and D. Eifler: Mater. Sci. Eng. A, 2008, vol. 483-484, pp. 394-97.10.1016/j.msea.2006.09.140 ↗
31. F. Forouzan, A. Najafizadeh, A. Kermanpur, A. Hedayati, and R. Surkialiabad: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7334-39.10.1016/j.msea.2010.08.002 ↗
32. A. Rezaee, A. Najafizadeh, A. Kermanpur, and M. Moallemi: Materials and Design, 2011, vol. 32, pp. 4437-42.10.1016/j.matdes.2011.03.065 ↗
33. Powder Diffraction File, International Center for Diffraction Database (ICDD): Card Number 31-619 for γ-austenite, 44-1290 for α′-martensite, 35-772 for cementite (Fe3C), 17-333 for Fe7C3, 36-1482 for Cr7C3, and 35-783 for Cr23C6, 2003.
34. J. Qu, P. J. Blau, and B.C. Jolly: Wear, 2007, vol. 263, pp. 719-26.10.1016/j.wear.2006.12.049 ↗
35. R.C. Jongbloed: Mater. Sci. Forum, 1994, vol. 163-165, pp. 611-18.10.4028/www.scientific.net/MSF.163-165.611 ↗
36. Z.B. Wang, J. Lu, and K. Lu: Surf. Coat. Technol., 2006, vol. 201, pp. 2796-801.10.1016/j.surfcoat.2006.05.019 ↗