journal article·2011-09

A Simple Approach to the Determination of Threshold Stress Intensity for Stress Corrosion Cracking (K ISCC) and Crack Growth of Sensitized Austenitic Stainless Steel

R. K. Singh Raman, Sarvesh Pal

Publisher page

Abstract

This article discusses the intricacies associated with the determination of threshold stress intensity for stress corrosion cracking (KISCC) of narrow regions such as the sensitized microstructure of austenitic stainless steel and presents a simple approach to the accurate determination of K ISCC of a sensitized stainless steel. K ISCC and crack growth rates of solution-annealed and sensitized AISI 304 stainless steel in the 42 wt pct MgCl 2 environment at 427 K (154 °C) were determined using the circumferential notch tensile (CNT) technique. The results presented here validate the ability of the CNT technique to overcome some of the fundamental difficulties in determination of the K ISCC of narrow regions, using the traditional techniques. This article also discusses the mechanistic aspects of the difference in fractographic features of the sensitized and solution-annealed stainless steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. D.A. Jones: Principles and Prevention of Corrosion, 2nd ed., Prentice Hall, Upper Saddle River, NJ, 1996.
2. H.S. Khatak and B. Raj: Corrosion of Austenitic Stainless Steels Mechanism, Mitigation and Monitoring, Woodhead Publishing Limited, Cambridge, United Kingdom, 2002.10.1533/9780857094018 ↗
3. H.S. Khatak, J.B. Gnanamoorthy, and P. Rodriguez: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1313–25.10.1007/BF02649868 ↗
4. M.O. Speidel: Metall. Trans. A, 1981, vol. 12A, pp. 779–89.10.1007/BF02648342 ↗
5. O.M. Alyousif and R. Nishimura: Corr. Sci., 2008, vol. 50 (8), pp. 2353–59.10.1016/j.corsci.2008.04.024 ↗
6. T.V. Vinoy, H. Shaikh, H.S. Khatak, N. Sivaibharasi, and J.B. Gnanamoorthy: J. Nucl. Mater., 1996, vol. 238 (2–3), pp. 278–84.10.1016/S0022-3115(96)00399-6 ↗
7. P.M. Singh, O. Ige, and J. Mahmood: Corrosion, 2003, vol. 59 (10), pp. 843–50.10.5006/1.3287704 ↗
8. W. Chu, C. Hsiao, T. Liu, and J. Yao: Eng. Fract. Mech., 1984, vol. 20 (2), pp. 271–79.10.1016/0013-7944(84)90132-2 ↗
9. D. Li and X. Mao: J. Mater. Sci. Lett., 1997, vol. 16, pp. 244–47.10.1023/A:1018520227736 ↗
10. P. Muraleedharan, H.S. Khatak, J.B. Gnanamoorthy, and P. Rodrigez: Metall. Trans. A, 1985, vol. 16A, pp. 285–89.10.1007/BF02816055 ↗
11. H.S. Khatak, P. Muraleedharan, J.B. Gnanamoorthy, P. Rodrigez, and K.A. Pamanabhan: J. Nucl. Mater., 1989, vol. 168 (1–2), pp. 157–61.10.1016/0022-3115(89)90577-1 ↗
12. A.J. Sedriks: in Corrosion Testing Made Easy: Stress Corrosion Cracking Test Methods, B.C. Syrett, ed., National Association of Corrosion Engineers, Houston, TX, 1990, vol. 1.
13. R.R. Ambriz, A.B.G. Mesmacque, A. Ruiz, A. Amrouche, and V.H. López: XXVII Encuentro del Grupo Español de Fractura Iberian Conf. on Fracture and Structural Integrity 2010, Porto, Portugal, 2010.
14. R.N. Ibrahim and H.L. Stark: Eng. Fract. Mech., 1987, vol. 28 (4), pp. 455–60.10.1016/0013-7944(87)90190-1 ↗
15. R.N. Ibrahim and H.L. Stark: Int. J. Fract., 1990, vol. 44, pp. 179–88.10.1007/BF00035515 ↗
16. R. Rihan, R.K.S. Raman, and R.N. Ibrahim: Mater. Sci. Eng, A, 2006, vol. 425 (1–2), pp. 272–77.10.1016/j.msea.2006.03.095 ↗
17. R.K. Singh Raman, R. Rihan, and R.N. Ibrahim: Corr. Sci., 2007, vol. 49 (12), pp. 4386–95.10.1016/j.corsci.2007.05.022 ↗
18. R.K. Singh Raman, R. Rihan, and R.N. Ibrahim: Mater. Sci. Eng. A, 2007, vols. 452–453, pp. 652–56.10.1016/j.msea.2006.11.067 ↗
19. R.K. Singh Raman, R. Rihan, and R.N. Ibrahim: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2963–73.10.1007/s11661-006-0178-8 ↗
20. S. Pal and R.K. Singh Raman: Corr. Sci., 2009, vol. 51 (10), pp. 2443–49.10.1016/j.corsci.2009.06.032 ↗
21. Metals Handbook, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1987, vol. 13.
22. H.L Stark and R.N. Ibrahim: Eng. Fract. Mech., 1986, vol. 25 (4), pp. 395–401.10.1016/0013-7944(86)90253-5 ↗
23. R.N. Ibrahim and A. Kotousov: Eng. Fract. Mech., 1999, vol. 64 (1), pp. 49–58.10.1016/S0013-7944(99)00056-9 ↗
24. R.N. Ibrahim, R. Rihan, and R.K. Singh Raman: Eng. Fract. Mech., 2008, vol. 75 (6), pp. 1623–34.10.1016/j.engfracmech.2007.06.007 ↗
25. R. Nishimura, I. Katim, and Y. Maeda: Corrosion, 2001, vol. 57 (10), pp. 853–62.10.5006/1.3290312 ↗
26. R. Nishimura, A. Sulaiman, and Y. Maeda: Corr. Sci., 2003, vol. 45 (2), pp. 465–84.10.1016/S0010-938X(02)00132-4 ↗
27. E. Denhard: Corrosion, 1960, vol. 16 (7), pp. 131–41.10.5006/0010-9312-16.7.131 ↗
28. N.A. Mariano and D. Spinelli: Mater. Sci. Eng. A, 2004, vol. 385 (1–2), pp. 212–19.10.1016/S0921-5093(04)00869-X ↗
29. S. Ghosh, V. Kain, A. Ray, H. Roy, S. Sivaprasad, S. Tarafder, and K. Ray: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2938–49.10.1007/s11661-009-0023-y ↗
30. S. Ghosh and V. Kain: J. Nucl. Mater., 2010, vol. 403 (1–3), pp. 62–67.10.1016/j.jnucmat.2010.05.028 ↗