Circumventing Practical Difficulties in Determination of Threshold Stress Intensity for Stress Corrosion Cracking of Narrow Regions of Welded Structures
Source abstract
Abstract
Determination of the threshold stress intensity for stress corrosion cracking (KIscc) of narrow areas such as weld and heat-affected zone (HAZ) of a weldment is a nontrivial task because of the requirements of large specimens in testing by the traditional techniques and the difficulty of restricting crack propagation to narrow regions in such specimens. This article describes a successful application of the circumferential notch tensile (CNT) technique to determine the KIscc of narrow regions of the weld and HAZ. Also, the microstructure of the HAZ of the manual metal arc-welded steel was simulated over a relatively small length of specimens and its KIscc in a hot caustic solution was determined successfully. Intergranular stress corrosion cracking was confirmed with a scanning electron microscope.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. R.K. Singh Raman and B.C. Muddle: Mater. Sci. Technol., 2003, vol. 19, pp. 1751–54.10.1179/026708303225009535 ↗
2. R. Sriram and D. Tromans: Corros. Sci., 1985, vol. 25, no. 2, pp. 79–91.10.1016/0010-938X(85)90099-X ↗
3. D. Singbeil and D. Tromans: J. Electrochem. Soc., 1981, vol. 128, no. 10, pp. 2065–70.10.1149/1.2127190 ↗
4. D. Singbeil and D. Tromans: Metall. Trans. A, 1982, vol. 13A, pp. 1091–98.10.1007/BF02643407 ↗
5. B. Arsenault and E. Ghali: Int. J. Press. Ves. Pip., 1991, vol. 45, pp. 23–41.10.1016/0308-0161(91)90042-Z ↗
6. J. Albarran, H. Lopez, and L. Martinez: J. Mater. Eng. Perform., 1998, vol. 7, no. 6, pp. 777–83.10.1361/105994998770347350 ↗
7. J. Gonzalez, F. Guitierrez-Solana, and J.M. Varona: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 281–90.10.1007/BF02648406 ↗
8. K. Abouswa, F. Elshawesh, and A. Abuargoub: Desalination, 2008, vol. 222, nos. 1–3, pp. 682–88.10.1016/j.desal.2007.02.073 ↗
9. A.J. Sedriks: Corrosion Testing Made Easy: Stress Corrosion Cracking Test Methods, vol. 1, B.C. Syrett, ed., National Association of Corrosion Engineers, Houston, TX, 1990.
10. R. Rihan, R.K.S. Raman, and R.N. Ibrahim: Mater. Sci. Eng. A, 2005, vol. 407, nos. 1–2, pp. 207–12.10.1016/j.msea.2005.06.055 ↗
11. R.N. Ibrahim, R. Rihan, and R.K. Singh Raman: Eng. Fract. Mech., 2008, vol. 75, no. 6, pp. 1623–34.10.1016/j.engfracmech.2007.06.007 ↗
12. R.K. Singh Raman, R. Rihan, and R.N. Ibrahim: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2963–73.10.1007/s11661-006-0178-8 ↗
13. C. Weisman: Fundamentals of Welding, 7th ed., vol. 1, Welding Handbook, C. Weisman, ed., American Welding Society, Miami, FL, 1976, p. 8.
14. N.T. Nguyen: Thermal Analysis of Welds, Developments in Heat Transfer, B. Sunden, ed., WIT Press, Southampton, U.K., 2004, p. 279.
15. R.W. Messler, Jr.: Principles of Welding Processes, Physics, Chemistry and Metallurgy, Wiley, New York, NY, 1999.10.1002/9783527617487 ↗
16. R.N. Ibrahim and H.L. Stark: Int. J. Fract., 1990, vol. 44, pp. 179–88.10.1007/BF00035515 ↗
17. R.N. Ibrahim and H.L. Stark: Eng. Fract. Mech., 1987, vol. 28, no. 4, pp. 455–60.10.1016/0013-7944(87)90190-1 ↗
18. J.R. Davis: Carbon and Alloy Steels, 1st ed. vol. 4, ASM International, Materials Park. OH, 1996.
19. B. Arsenault and E. Ghali: Int. J. Press. Ves. Pip., 1991, vol. 45, no. 1, pp. 23–41.10.1016/0308-0161(91)90042-Z ↗
20. V.G. Laz’ko, V.E. Laz’ko, and B.M. Ovsyannikov: Strength Mater., 1981, vol. 13, no. 4, pp. 527–32.10.1007/BF00762511 ↗
21. S. Kim, S.Y. Kang, S. Lee, S.J. Oh, S.-J. Kwon, O.H. Kim, and J.H. Hong: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1107–19.10.1007/s11661-000-0106-2 ↗
22. V.G. Laz’ko, V.E. Laz’ko, and B.M. Ovsynnikov: Problemy Procnosty, 1981, no. 4, pp. 527–32.
23. H.A. Aglan, Z.Y. Liu, and M. Fateh: J. Mater. Process. Technol., 2004, vol. 151, no. 1–3, pp. 268–74.10.1016/j.jmatprotec.2004.04.073 ↗
24. H.A. Aglan and M. Fateh: J. Mech. Mater. Struct., 2007, vol. 2, no. 2, pp. 335–46.10.2140/jomms.2007.2.335 ↗
25. H.A. Aglan and M. Fateh: Int. J. Damage Mechanics, 2006, vol. 15, pp. 393–410.10.1177/1056789506060775 ↗
26. R. Kerr, F. Solana, I.M. Bernstein, and A.W. Thompson: Metall. Trans. A, 1987, vol. 22A, pp. 1011–22.10.1007/BF02668549 ↗
27. D. Singbeil and D. Tromans: J. Electrochem. Soc., 1982, vol. 129, no. 12, pp. 2669–73.10.1149/1.2123644 ↗