In-Situ Fracture Observation and Fracture Toughness Analysis of Zr-Based Amorphous Alloys Containing Ductile Dendrites
Source abstract
Abstract
Effects of dendrite size on fracture properties of Zr-based amorphous alloys containing ductile β dendrites were explained by directly observing microfracture processes using an in-situ loading stage installed inside a scanning electron microscope (SEM) chamber. Three amorphous alloy plates having different thicknesses were fabricated by varying cooling rates after vacuum arc melting. The effective size of β dendrites was varied from 14.7 to 30.1 μm in the alloy plates, while their volume fraction was almost constant. According to microfracture observation of the alloy containing fine β dendrites, shear bands initiated at the amorphous matrix were connected with the notch tip as they were deepened through dendrites, which led to abrupt crack propagation. In the alloy containing coarser β dendrites, shear bands were initiated at the amorphous matrix to form a crack near the notch tip region and were expanded over large matrix areas. The crack propagation was frequently blocked by β dendrites, and many shear bands are formed near or in front of the propagating crack, thereby resulting in stable crack growth, which could be confirmed by the fracture resistance curve (R-curve) behavior. This increase in fracture resistance with increasing crack length could be explained by mechanisms of blocking of crack growth, multiple shear band formation, and crack blunting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. K.L. Sahoo, M. Wollgarten, J. Haug, and J. Banhart: Acta Mater., 2005, vol. 53, pp. 3861–70.10.1016/j.actamat.2005.04.034 ↗
2. W. Chen, Y. Wang, J. Qiang, and C. Dong: Acta Mater., 2003, vol. 51, pp. 1899–1907.10.1016/S1359-6454(02)00596-7 ↗
3. Y.C. Kim, J.M. Park, J.K. Lee, D.H. Bae, W.T. Kim, and D.H. Kim: Mater. Sci. Eng., 2004, vol. A375–A377, pp. 749–53.10.1016/j.msea.2003.10.116 ↗
4. R. Busch, A. Masuhr, and W.L. Johnson: Mater. Sci. Eng., 2001, vols. A304–06, pp. 97–102.10.1016/S0921-5093(00)01458-1 ↗
5. J.M. Park, H.J. Chang, K.H. Han, W.T. Kim, and D.H. Kim: Scripta Mater., 2005, vol. 53, pp. 1–6.10.1016/j.scriptamat.2005.03.024 ↗
6. A. Inoue: Acta Mater., 2000, vol. 48, pp. 279–306.10.1016/S1359-6454(99)00300-6 ↗
7. T. Egami: Appl. Phys. Lett., 1975, vol. 26, pp. 128–30.10.1063/1.88072 ↗
8. W.L. Johnson: MRS Bull., 1999, vol. 24, pp. 42–56.10.1557/S0883769400053252 ↗
9. Y.Q. Wu, T. Bitoch, K. Hono, A. Makino, and A. Inoue: Acta Mater., 2001, vol. 49, pp. 4069–77.10.1016/S1359-6454(01)00274-9 ↗
10. M. Lee, H.-K. Kim, and J.-C. Lee: Metall. Mater. Int., 2010, vol. 16, pp. 877–81.10.1007/s12540-010-1204-3 ↗
11. C.C. Hays, C.P. Kim, and W.L. Johnson: Phys. Rev. Lett., 2000, vol. 84, pp. 2901–04.10.1103/PhysRevLett.84.2901 ↗
12. C.C. Hays, W.L. Johnson, and C.P. Kim: Mater. Sci. Eng., 2001, vols. A304–A306, pp. 650–55.10.1016/S0921-5093(00)01557-4 ↗
13. L.Q. Xing, Y. Li, K.T. Ramesh, J. Li, and T.C. Hufnagel: Phys. Rev. B, 2001, vol. 64, 180201(R).10.1103/PhysRevB.64.180201 ↗
14. K.-Y. Kim, H.-S. Joo, B.-H. Kang, and W. Gao: Metall. Mater. Int., 2011, vol. 17, pp. 857–63.10.1007/s12540-011-1026-y ↗
15. Y.S. Oh, C.P. Kim, S. Lee, and N.J. Kim: Acta Mater., 2011, vol. 59, pp. 7277–86.10.1016/j.actamat.2011.08.006 ↗
16. J.W. Qiao, A.C. Sun, E.W. Huang, Y. Zhang, P.K. Liaw, and C.P. Chuang: Acta Mater., 2011, vol. 59, pp. 4126–37.10.1016/j.actamat.2011.03.036 ↗
17. H.T. Jeong, W. Yook, B.J. Kim, W.T. Kim, and D.H. Kim: Met. Mater. Int., 2010, vol. 16, pp. 517–22.10.1007/s12540-010-0801-5 ↗
18. F. Szuecs, C.P. Kim, and W.L. Johnson: Acta Mater., 2001, vol. 49, pp. 1507–13.10.1016/S1359-6454(01)00068-4 ↗
19. D.L. Davison: Metall. Trans. A, 1987, vol. 18A, pp. 2115–28.10.1007/BF02647083 ↗
20. J.G. Lee, D.-G. Lee, S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3753–61.10.1007/s11661-004-0281-7 ↗
21. S.R. Nutt and L.M. Duva: Scripta Metall., 1986, vol. 20, pp. 1055–60.10.1016/0036-9748(86)90435-7 ↗
22. M. Tavoosi, M.H. Enayati, and F. Karimzadeh: Met. Mater. Int., 2011, vol. 17, pp. 853–56.10.1007/s12540-011-1025-z ↗
23. J.G. Lee, K.-S. Sohn, S. Lee, N.J. Kim, and C.P. Kim: Mater. Sci. Eng., 2007, vol. A464, pp. 261–68.
24. J.G. Lee, S.S. Park, D.-G. Lee, S. Lee, and N.J. Kim: Intermetallics, 2004, vol. 12, pp. 1125–31.10.1016/j.intermet.2004.04.022 ↗
25. B. Kim, J. Do, S. Lee, and I. Park: Mater. Sci. Eng., 2010, vol. A25, pp. 6745–57.10.1016/j.msea.2010.07.016 ↗
26. S. Lee, K.-S. Sohn, C.G. Lee, and B.I. Jung: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 123–34.10.1007/s11661-997-0088-4 ↗
27. R.O. Ritchie and R.M. Horn: Metall. Trans. A, 1978, vol. 9A, pp. 331–41.10.1007/BF02646382 ↗
28. Y.-H. Kim, D. Kwon, and S. Lee: Acta Metall. Mater., 1994, vol. 42, pp. 1887–91.10.1016/0956-7151(94)90013-2 ↗
29. D. Broek: Elementary Engineering Fracture Mechanics, Martinus Nijhoff Publishers, Boston, 1982, pp. 297–309.10.1007/978-94-011-9055-8 ↗
30. J.G. Lee, H. Lee, Y.S. Oh, S. Lee, and N.J. Kim: Intermetallics, 2006, vol. 14, pp. 987–93.10.1016/j.intermet.2006.01.039 ↗