journal article·2007-04

Mathematical Modeling of Multipass Hot Deformation of Aluminum Alloy AA5083—Model Development and Validation

H. Ahmed, M.A. Wells, D.M. Maijer, G. Lockhart, M.R. Van der Winden

Publisher page

Abstract

Hot rolling, a critical step in the manufacturing of sheet products, influences the final sheet properties based on the microstructure evolution during this operation. A comprehensive mathematical model of the hot rolling process for aluminum alloys has been developed. This article outlines the development of a two-dimensional (2-D) mathematical model to simulate multipass hot rolling using the commercial finite element (FE) package, ABAQUS. Microstructure evolution during multipass rolling was modeled using a physically based approach to predict the stored energy and the resulting microstructure for an AA5083 aluminum alloy. The stored energy in the material between passes is quantified using a rule-of-mixtures approach based on the fraction of the material that is recrystallized. An extensive experimental program was undertaken to validate the model using Corus’ single-stand reversible rolling facility located in IJmuiden, The Netherlands. Overall, the model was able to simulate the thermomechanical history experienced during multipass hot rolling reasonably well based on comparison to temperature and rolling load measurements. The model was also able to predict the fraction recrystallized through the thickness of the strip reasonably well, but the grain size predictions were consistently low.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. H.E. Vatne, T. Furu, R. Orsund, E. Nes: Acta Mater., 1996, vol. 44, pp. 4463–7310.1016/1359-6454(96)00078-X ↗
2. X.J. Duan, T. Sheppard: Modell. Simul. Mater. Sci. Eng., 2002, vol. (10), pp. 363–8010.1088/0965-0393/10/4/301 ↗
3. H. Ahmed, M.A. Wells, D.M. Maijer, B.J. Howes, M.R. van der Winden: Mater. Sci. Eng. A, 2005, vol. 390 (1–2), pp. 278–9010.1016/j.msea.2004.08.045 ↗
4. H.E. Vatne, K. Marthinsen, R. Orsund, E. Nes: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 4133–4410.1007/BF02595661 ↗
5. G.C. Reyes and J. Beynon: in Hot Deformation of Aluminum Alloys, TMS, Warrendale, PA, 1991.
6. K. Marthinsen, S. Abtahi, K. Sjolstad, B. Holmedal, E. Nes, A. Johansen, J.A. Saeter, T. Furu, O. Engler, Z.J. Lok, J. Talamantes-Silva, C. Allen, C. Liu: Aluminium, 2004, vol. 80 (6), pp. 729–38
7. T. Furu, K. Marthinsen, E. Nes: Mater. Sci. Technol., 1990, vol. 6, pp. 1093–110210.1179/mst.1990.6.11.1093 ↗
8. M.R. van der Winden: Ph.D. Thesis, Sheffield University, Sheffield, United Kingdom, 1999
9. M.A. Wells: Ph.D. Thesis, University of British Columbia, Vancouver, BC, Canada, 1995
10. VAI rolling technology report, private communication
11. VAI hot band technology report, private communication
12. X.J. Duan, T. Sheppard: Comput. Mater. Sci., 2003, vol. 27 (3), pp. 250–5810.1016/S0927-0256(02)00362-2 ↗
13. H.E. Vatne: Ph.D. Thesis, Norwegian Institute of Technology, Trondheim, Norway, 1995
14. H.E. Vatne, T. Furu, R. Orsund, E. Nes: Mater. Sci. Technol., 1996, vol. 12, pp. 201–1010.1179/mst.1996.12.3.201 ↗
15. J.P. Holman: Heat Transfer, McGraw-Hill, New York, NY, 1997.
16. M.A. Wells, D.M. Maijer, S. Jupp, G. Lockhart, M.R. van der Winden: Mater. Sci. Technol., 2003, vol. 19 (4), pp. 467–7610.1179/026708303225010713 ↗
17. H. Ahmed, M.A. Wells, D.M. Maijer, M.R. van der Winden: in Hot Deformation of Aluminum Alloys III, TMS, Warrendale, PA, 2003
18. C.M. Sellars, Q. Zhu: Mater. Sci. Eng. A, 2000, vol. 280, pp. 1–710.1016/S0921-5093(99)00648-6 ↗
19. C.M. Sellars and Q. Zhu: in Hot Deformation of Aluminum Alloys II, TMS, Warrendale, PA, 1998.
20. H. Ahmed: Ph.D. Thesis, University of British Columbia, Vancouver, BC, Canada, 2005
21. F.J. Humphreys, M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, New York, NY, 1996, p. 363
22. H. Ahmed, M.A. Wells, D.M. Maijer, M.R. van der Winden: Light Metals 2003, CIM, Vancouver, BC, Canada, 2003
23. Corus Research Development and Technology, Introduction to the Research Mill of Corus Research Development and Technology, 2000
24. C.D. Henning and R. Parker: J. Heat Transfer, 1967, pp. 146–5410.1115/1.3614337 ↗
25. K.D. Maglic, B.S. Marsicanin: High Temp.-High Press., 1973, vol. 5, pp. 105–10
26. S.P. Timothy, H.L. Yiu, J.M. Fine, R.A. Ricks: Mater. Sci. Technol., 1991, vol. 7 (3), pp. 255–6110.1179/mst.1991.7.3.255 ↗