The Dependence of Creep Behavior on Elemental Partitioning in Mg-5Al-3Ca-xSn Alloys
Source abstract
Abstract
Cast Mg-5Al-3Ca-xSn alloys have been examined to investigate the effect of Sn additions on elemental partitioning during solidification, microstructure development, and compressive creep behavior at 453 K (180 °C). Alloys containing 0.25 to 3.0 wt pct Sn were cast with a permanent mold technique. The addition of 0.75 to 1.0 wt pct Sn had a beneficial effect on Ca partitioning to the α-Mg phase. Additions beyond 1 wt pct Sn resulted in the formation of an orthorhombic Mg-Ca-Sn phase, with decreased Ca partitioning to the α-Mg. A lower minimum creep rate was observed for the Mg-5Al-3Ca-xSn alloy with increased Ca partitioning. Consistent with this finding, analyses that consider the influence of solute and precipitation strengthening on creep in Mg-5Al-3Ca-xSn alloys suggest that Ca in the α-Mg contributes to a greater degree than Al in solution to the creep resistance at 453 K (180 °C).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A.A. Luo: Int. Mater. Rev., 2004, vol. 49, pp. 13–30.10.1179/095066004225010497 ↗
2. M.O. Pekguleryuz and E. Baril: Metall. Mater. Trans. A, 2001, vol. 42A, pp. 1258–67.
3. P. Bakke, H. Westengen, S. Sannes, and D. Albright: SAE Technical Paper 2004-01-0655, SAE International, 2004.
4. B.R. Powell, A.A. Luo, V. Rezhets, J.J. Bommarito, and B.L. Tiwari: SAE Technical Paper 2001-01-0422, SAE International, 2001.
5. A.A. Luo, M.P. Balogh, and B.R. Powell: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 567–74.10.1007/s11661-002-0118-1 ↗
6. B. Bronfin, N. Moscovitch, V. Trostenetsky, G. Gerzberg, N. Nagar, and R. Yehuda: Magnesium Technology 2008, M.O. Pekguleryuz, N.R. Neelameggham, R.S. Beals, and E.A. Nyberg, eds., TMS, Warrendale, PA, 2008, pp. 411–15.
7. A. Suzuki, N.D. Saddock, J.W. Jones, and T.M. Pollock: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 975–83.10.1007/s11661-006-0070-6 ↗
8. A. Suzuki, N.D. Saddock, J.W. Jones, and T.M. Pollock: Acta Mater., 2005, vol. 53, pp. 2823–34.10.1016/j.actamat.2005.03.001 ↗
9. A. Suzuki, N.D. Saddock, L. Riester, E. Lara-Curzio, J.W. Jones, and T.M. Pollock: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 420–27.10.1007/s11661-006-9031-3 ↗
10. A. Suzuki, N.D. Saddock, J.R. TerBush, B.R. Powell, J.W. Jones, and T.M. Pollock: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 696–702.10.1007/s11661-007-9455-4 ↗
11. J.R. TerBush, A. Suzuki, N.D. Saddock, J.W. Jones, and T.M. Pollock: Scripta Mater., 2008, vol. 58, pp. 914–17.10.1016/j.scriptamat.2008.01.015 ↗
12. J.R. TerBush, N.D. Saddock, J.W. Jones, and T.M. Pollock: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2435–42.10.1007/s11661-010-0271-x ↗
13. N.D. Saddock, A. Suzuki, J.R. TerBush, J.W. Jones, T.M. Pollock, J.E. Zindel, and J.E. Allison: SAE Technical Paper 2007-01-1027, SAE International, 2007.
14. N.D. Saddock, A. Suzuki, J.R. TerBush, J.W. Jones, and T.M. Pollock: Magnesium Technology 2007, R.S. Beals, A.A. Luo, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, Warrendale, PA, 2007, pp. 407–12.
15. N.D. Saddock: Ph.D. Dissertation, University of Michigan, Ann Arbor, MI, 2008.
16. H. Cao, C. Zhang, J. Zhu, G. Cao, S. Kou, R. Schmid-Fetzer, and Y.A. Chang: Acta Mater., 2008, vol. 56, pp. 5245–54.10.1016/j.actamat.2008.07.003 ↗
17. M.O. Pekguleryuz and A.A. Kaya: Adv. Eng. Mater., 2003, vol. 5, pp. 866–78.10.1002/adem.200300403 ↗
18. Y.M. Won and B.G. Thomas: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1755–67.10.1007/s11661-001-0152-4 ↗
19. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Nelson Thornes Ltd., Cheltenham, UK, 1992, pp. 185–262.10.1007/978-1-4899-3051-4_4 ↗
20. C. Zhang, D. Ma, K. Wu, H. Cao, J. Zhu, G. Cao, S. Kou, and Y.A. Chang: Magnesium Technology 2006, A.A. Luo, N.R. Neelameggham, and R.S. Beals, eds., TMS, Warrendale, PA, 2006, pp. 45–50.
21. C. Zhang, D. Ma, K.-S. Wu, H.-B. Cao, G.-P. Cao, S. Kou, Y.A. Chang, and X.-Y. Yan: Intermetallics, 2007, vol. 15, pp. 1395–1400.10.1016/j.intermet.2007.01.009 ↗
22. D. Mirkovic and R. Schmid-Fetzer: Magnesium Technology 2009, E.A. Nyberg, S.R. Agnew, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, Warrendale, PA, 2009, pp. 97–100.
23. D. Mirkovic and R. Schmid-Fetzer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 958–73.10.1007/s11661-009-9787-3 ↗
24. D. Mirkovic and R. Schmid-Fetzer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 974–81.10.1007/s11661-009-9788-2 ↗
25. J.R. TerBush: Ph.D. Dissertation, University of Michigan, Ann Arbor, MI, 2010.
26. J.R. TerBush, R.R. Adharapurapu, J.W. Jones, and T.M. Pollock: Magnesium Technology 2009, E.A. Nyberg, S.R. Agnew, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, Warrendale, PA, 2009, pp. 161–65.
27. N.D. Saddock, A. Suzuki, J.W. Jones, and T.M. Pollock: Scripta Mater., 2010, vol. 63, pp. 692–97.10.1016/j.scriptamat.2010.03.055 ↗
28. M. Kunst, A. Fischersworring-Bunk, G. L’Esperance, P. Plamondon, and U. Glatzel: Mater. Sci. Eng. A, 2009, vols. 510–511, pp. 387–92.10.1016/j.msea.2008.07.078 ↗
29. S.M. Zhu, M.A. Gibson, J.F. Nie, M.A. Easton, and T.B. Abbott: Scripta Mater., 2008, vol. 58, pp. 477–80.10.1016/j.scriptamat.2007.10.041 ↗
30. J.R. TerBush, J.W. Jones, and T.M. Pollock: Magnesium Technology 2008, M.O. Pekguleryuz, N.R. Neelameggham, R.S. Beals, and E.A. Nyberg, eds., TMS, Warrendale, PA, 2008, pp. 117–22.
31. J.R. TerBush, O.H. Chen, J.W. Jones, and T.M. Pollock: Magnesium Technology 2010, S.R. Agnew, E. Nyberg, W. Sillekens, and N.R. Neelameggham, eds., TMS, Warrendale, PA, 2010, pp. 607–11.
32. S. Tin, T.M. Pollock, and W. Murphy: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1743–53.10.1007/s11661-001-0151-5 ↗
33. M. Gungor: Metall. Trans. A, 1989, vol. 20A, pp. 2529–33.10.1007/BF02666687 ↗
34. S.C. Huang, L. Peluso, and D. Backman: Solidification, W.H. Hofmeister, J.R. Rogers, N.B. Singh, S.P. Marsh, and P.W. Vorhees, eds., TMS, Warrendale, PA, 1999, pp. 163–72.
35. H.D. Brody and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 615–24.
36. T.F. Bower, H.D. Brody, and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 624–34.
37. A. Kozlov, M. Ohno, T. Abu Leil, N. Hort, K.U. Kainer, and R. Schmid-Fetzer: Intermetallics, 2008, vol. 16, pp. 316–21.10.1016/j.intermet.2007.10.011 ↗
38. A. Kozlov, M. Ohno, R. Arroyave, Z.K. Liu, and R. Schmid-Fetzer: Intermetallics, 2008, vol. 16, pp. 299–315.10.1016/j.intermet.2007.10.010 ↗
39. M.S. Dargusch, K. Pettersen, K. Nogita, M.D. Nave, and G.L. Dunlop: Mater. Trans., 2006, vol. 47, pp. 977–82.10.2320/matertrans.47.977 ↗
40. F.A. Mohamed and T.G. Langdon: Acta Metall., 1974, vol. 22, pp. 779–88.10.1016/0001-6160(74)90088-1 ↗
41. K. Maruyama, M. Suzuki, and H. Sato: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 875–82.10.1007/s11661-002-0157-7 ↗
42. J.R. TerBush, O.H. Chen, J.W. Jones, and T.M. Pollock: Magnesium Technology 2011, W. Sillekens, S.N. Mathaudhu, and N.R. Neelameggham, eds., TMS, Warrendale, PA, 2011, pp. 217–21.
43. T. Uesugi, M. Kohyama, and K. Higashi: Mater. Sci. Forum, 2003, vols. 426–432, pp. 599–604.10.4028/www.scientific.net/MSF.426-432.599 ↗
44. G. Moreau, J.A. Cornet, and D. Calais: J. Nucl. Mater., 1971, vol. 38, pp. 197–202.10.1016/0022-3115(71)90043-2 ↗
45. J.F. Nie: Scripta Mater., 2003, vol. 48, pp. 1009–15.10.1016/S1359-6462(02)00497-9 ↗
46. J.F. Nie and B.C. Muddle: Magnesium Alloys and their Applications, B.L. Mordike and K.U. Kainer, eds., Wiley, New York, NY, 1998, pp. 229–34.
47. C.R. Hutchinson, J.F. Nie, and S. Gorsse: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2093–2105.10.1007/s11661-005-0330-x ↗
48. E.W. Kelley and W.F. Hosford Jr.: Trans. TMS-AIME, 1968, vol. 242, pp. 5–13.
49. A. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp. 1351–56.10.1016/0001-6160(69)90152-7 ↗