journal article·2022-10

Environment-Assisted Fatigue Crack Propagation (EAFCP) Behavior of Ti64 Alloy Fabricated by Direct Energy Deposition (DED) Process

Hojun Oh, Jung Gi Kim, Junmin Lee, Sangshik Kim

Publisher page

Abstract

Environment-assisted fatigue crack propagation (EAFCP) behavior of as-built and β-annealed Ti64 specimens manufactured by direct energy deposition (DED) process was examined in air and 3.5 pct NaCl solution under an anodic applied potential of Ecorr + 0.05 VSCE. As-built DED Ti64 specimen was found to be susceptible to EAFCP in 3.5 pct NaCl solution, and β anneal did not decrease the sensitivity to EAFCP. It was suggested that Cl− bearing environment tended to decrease the tendency for crack bifurcation during EAFCP of DED Ti64 specimen, because of local corrosion damage at boundaries between α and β phases. Since crack bifurcation increases the resistance to fatigue crack propagation (FCP) by reducing effective ∆K (stress intensity factor range) at the tip of crack, the FCP rates of DED Ti64 specimen increased in 3.5 pct NaCl solution.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. R.R. Boyer: Mater. Sci. Eng. A, 2007, vol. 213, pp. 103–14.10.1016/0921-5093(96)10233-1 ↗
2. O.S. Fatoba, O.S. Adesina, and A.P.I. Popoola: Int. J. Adv. Manuf. Technol., 2018, vol. 97, pp. 2341–50.10.1007/s00170-018-2106-7 ↗
3. R.S. Razavi, M. Salehi, M. Ramazani, and H.C. Man: Corrosion Sci., 2009, vol. 51, pp. 2324–29.10.1016/j.corsci.2009.06.016 ↗
4. A. Azarniya, X.G. Colera, M.J. Mirzaali, S. Sovizi, F. Bartolomeu, M.K. Weglowski, W.W. Wits, C.Y. Yap, J. Ahn, G. Miranda, F.S. Silva, H.R.M. Hosseini, S. Ramakrishna, and A.A. Zadpoor: J. Alloys Compd., 2019, vol. 804, pp. 163–91.10.1016/j.jallcom.2019.04.255 ↗
5. K. Bower, S. Murray, A. Reinhart, and A. Nieto: Results Mater, 2020, vol. 8, 100122.10.1016/j.rinma.2020.100122 ↗
6. A. Leon, G.K. Levy, T. Ron, A. Shirizly, and E. Aghion: Addit. Manuf., 2020, vol. 33, 101039.
7. J.B. Lee, D.I. Seo, and H.Y. Chang: Met. Mater. Int., 2020, vol. 26(1), pp. 39–45.10.1007/s12540-019-00484-z ↗
8. D.I. Seo and J.B. Lee: J. Electrochem. Soc., 2020, vol. 167(10), p.101509.10.1149/1945-7111/ab9d64 ↗
9. D.H. Abdeen and B.R. Palmer: Rapid Prototyping J., 2016, vol. 22, pp. 322–29.10.1108/RPJ-09-2014-0104 ↗
10. Y. Byun, S.W. Lee, S.M. Seo, J.T. Yeom, S.E. Kim, N.H. Kang, and J.K. Hong: Met. Mater. Int., 2018, vol. 24, pp. 1213–220.10.1007/s12540-018-0148-x ↗
11. B.E. Carroll, T.A. Palmer, and A.M. Beese: Acta Mater., 2015, vol. 87, pp. 309–20.10.1016/j.actamat.2014.12.054 ↗
12. S.Y. Kim, H.J. Oh, J.G. Kim, and S.S. Kim: Met. Mater. Int., 2022, vol. 28, pp. 205–15.10.1007/s12540-021-01087-3 ↗
13. J. Yang, H. Yang, H. Yu, Z. Wang, and X. Zeng: Metall. Mater. Trans. A, 2017, vol. 48, pp. 3583–93.10.1007/s11661-017-4087-9 ↗
14. D.I. Seo and J.B. Lee: J. Electrochem. Soc., 2019, vol. 166, pp. 428–33.10.1149/2.0571913jes ↗
15. N. Dai, J. Zhang, Y. Chen, and L.C. Zhang: J. Electrochem. Soc., 2017, vol. 164, pp. 428–34.10.1149/2.1481707jes ↗
16. L.P. Borrego, J.D. Jesus, J.A.M. Ferreira, J.D. Costa, and C. Capela: Procedia Struct Integrity, 2019, vol. 17, pp. 562–67.10.1016/j.prostr.2019.08.075 ↗
17. A.M. Fekry: Electrochim. Acta, 2009, vol. 54, pp. 3480–89.10.1016/j.electacta.2008.12.060 ↗
18. J. Soltis: Corrosion Sci., 2015, vol. 90, pp. 5–22.10.1016/j.corsci.2014.10.006 ↗
19. D.I. Seo and J.B. Lee: Corros Sci., 2020, vol. 173, 108789.10.1016/j.corsci.2020.108789 ↗
20. M. Nabhani, R.S. Razavi, and M. Barekat: Eng. Fail. Anal., 2019, vol. 97, pp. 234–41.10.1016/j.engfailanal.2019.01.023 ↗
21. J.S. Jesus, L.P. Borrego, J.A.M. Ferreira, J.D. Costa, and C. Capela: Eng. Fail. Anal., 2020, vol. 118, 104852.10.1016/j.engfailanal.2020.104852 ↗
22. Y. Zhao, Y. Liu, X. Gai, Y. Bai, T. Zhang, D. Xu, and F. Wang: Corrosion, 2021, vol. 77(8), pp. 853–65.10.5006/3822 ↗
23. J.L. Milner, F.A. Farha, C. Bunget, T. Kurfess, and V.H. Hammond: Mater. Sci. Eng. A, 2013, vol. 561, pp. 109–17.10.1016/j.msea.2012.10.081 ↗
24. M. Seifi, A. Salem, D. Satko, J. Shaffer, and J.J. Lewandowski: Int. J. Fatigue, 2017, vol. 94, pp. 263–87.10.1016/j.ijfatigue.2016.06.001 ↗
25. ASTM International: Standard test methods for determining average grain size E112, ASTM International, West Conshohocken, PA, 2004.
26. S.J. Ahn, D.H. Jeong, Y.N. Kwon, M. Goto, H.K. Sung, and S.S. Kim: Int. J. Fatigue, 2018, vol. 111, pp. 186–95.10.1016/j.ijfatigue.2018.02.013 ↗
27. ASTM International: Standard test method for measurement of fatigue crack growth rates E647, ASTM International, West Conshohocken, PA, 2002.
28. Y.B. Yu, S.S. Kim, Y.S. Lee, and J.H. Lee: Met. Mater. Trans. A, 2002, vol. 33, pp. 1399–12.10.1007/s11661-002-0064-y ↗
29. C. Li, Z.Y. Liu, X.Y. Fang, and Y.B. Guo: Procedia CIRP, 2018, vol. 71, pp. 348–53.10.1016/j.procir.2018.05.039 ↗
30. M. Shiomi, K. Osakada, K. Nakamura, T. Yamashita, and F. Abe: CIRP Ann., 2004, vol. 53, pp. 195–98.10.1016/S0007-8506(07)60677-5 ↗
31. A.E. Davis, J.R. Kennedy, J. Ding, and P.B. Prangnell: Mater. Charact., 2020, vol. 163, 110298.10.1016/j.matchar.2020.110298 ↗
32. S.J. Ann, J.H. Park, D.H. Jeong, H.K. Sung, Y.N. Sung, and S.S. Kim: Met. Mater. Int., 2018, vol. 24, pp. 327–36.10.1007/s12540-018-0031-9 ↗
33. Y. Bai, X. Gai, L.C. Zhang, Y. Liu, Y. Hao, X. Zhang, R. Yang, and Y. Gao: Corrosion Sci., 2017, vol. 123, pp. 289–96.10.1016/j.corsci.2017.05.003 ↗
34. M. Atapour, A. Pilchak, G.S. Frankel, J.C. Williams, M.H. Fathi, and M. Shamanian: Corrosion, 2010, vol. 66, pp. 065004-1–65009.10.5006/1.3452400 ↗
35. D.H. Jung, J.K. Kwon, N.S. Woo, Y.J. Kim, M. Goto, and S.S. Kim: Metall. Mater. Trans. A, 2014, vol. 45, pp. 654–62.10.1007/s11661-013-2012-4 ↗
36. B. Holper, H. Mayer, A.K. Vasudevan, and S.E. Stanzl-Tschegg: Int. J. Fatigue, 2003, vol. 25, pp. 397–411.10.1016/S0142-1123(02)00163-9 ↗
37. K. Tanaka and S. Matsuoka: Int. J. Fracture, 1977, vol. 13, pp. 563–83.10.1007/BF00017293 ↗
38. A. Hartman and J. Schijve: Eng. Fract. Mech., 1970, vol. 1, pp. 615–31.10.1016/0013-7944(70)90003-2 ↗
39. M.A. Wahab and V. Raghuram: IMECE, 2013, vol. 14, pp. 1–0.
40. P. Paris and F. Erdogan: J. Basic Eng., 1963, vol. 85, pp. 528–33.10.1115/1.3656900 ↗
41. N. Nanninga, S.Y. Levy, and C. White: J. Res. Natl. Inst. Stand. Technol., 2010, vol. 115, pp. 437–52.10.6028/jres.115.030 ↗
42. Y. Kondo, M. Kubota, and K. Shimada: Eng. Fract. Mech., 2010, vol. 77, pp. 1963–74.10.1016/j.engfracmech.2010.01.012 ↗
43. Y. Ro, S.R. Agnew, and R.P. Gangloff: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1449–65.10.1007/s11661-008-9522-5 ↗
44. D.H. Jeong, Y.N. Kwon, M. Goto, and S.S. Kim: Int. J. Mech. Mater. Eng., 2017, vol. 12, pp. 1–0.10.1186/s40712-016-0069-8 ↗
45. S. Shrestha, J.E. Rassi, M. Kannan, and G. Morscher: Mater. Sci. Eng. A, 2021, vol. 823, 141701.10.1016/j.msea.2021.141701 ↗
46. S.S. Kim, D.H. Jeong, and H.K. Sung: Met. Mater. Int., 2018, vol. 24, pp. 1–4.10.1007/s12540-017-7459-1 ↗
47. S.M. Kim, H.S. Choi, J.H. Lee, and S.S. Kim: Int. J. Fatigue, 2020, vol. 140, 105802.10.1016/j.ijfatigue.2020.105802 ↗