On the Role of Deformation and Cracking in the Cold Spray Processing of Refractory Ta Powders Onto Ta or 4340 Steel Substrates: Effects of Topical Oxide Layers and Spray Velocity
Source abstract
Abstract
This paper presents the results of a combined experimental and computational study of the role of deformation and cracking phenomena on the cold spray processing of refractory Ta powders with topical nanoscale oxide layers. The structure of the Ta powders and the topical nanoscale oxide films are elucidated using a combination of Scanning Electron Microscopy (SEM), Focused Ion Beam (FIB) and Transmission Electron Microscopy (TEM). The mechanical properties of the topical oxides are also obtained from ab-initio density functional theory (DFT) calculations. The results obtained from DFT and SEM/TEM measurements of film dimensions are then incorporated into the finite element (FE) models of deformation, heating, and cracking phenomena. The induced temperatures and stresses associated with the cold spray impact of Ta particles with Ta or 4340 steel substrates are then discussed along with their implications for the development of splat microstructures, cracking, and the design of cold spray conditions for the fabrication and repair of robust Ta and 4340 steel structures.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. M.F. Smith: Cold Spray Mater Depos. Process Fundam. Appl., 2007, vol. 1911, pp. 43–61.10.1533/9781845693787.1.43 ↗
2. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, and M. Dao: Surf. Eng., 2014, vol. 30, pp. 369–95.10.1179/1743294414Y.0000000270 ↗
3. S. Pathak and G.C. Saha: Coatings, 2017, vol. 7, pp. 2079–6412.10.3390/coatings7080122 ↗
4. S. An, B. Joshi, A.L. Yarin, M.T. Swihart, and S.S. Yoon: Adv. Mater., 2020, vol. 32, pp. 1–34.
5. P. Poza and M.Á. Garrido-Maneiro: Prog. Mater. Sci., 2022, vol. 123, p. 100839.10.1016/j.pmatsci.2021.100839 ↗
6. J.C. Lee, H.J. Kang, W.S. Chu, and S.H. Ahn: CIRP Ann., 2007, vol. 56, pp. 577–80.10.1016/j.cirp.2007.05.138 ↗
7. V. Champagne and D. Helfritch: Mater. Sci. Technol., 2015, vol. 31, pp. 627–34.10.1179/1743284714Y.0000000723 ↗
8. S. Sinha-Ray, M.W. Lee, S. Sinha-Ray, S. An, B. Pourdeyhimi, S.S. Yoon, and A.L. Yarin: J. Mater. Chem. C, 2013, vol. 1, pp. 3491–98.10.1039/c3tc30248b ↗
9. S. An, C. Lee, M. Liou, H.S. Jo, J.-J. Park, A.L. Yarin, and S.S. Yoon: ACS Appl. Mater. Interfaces, 2014, vol. 6, pp. 13657–66.10.1021/am503139n ↗
10. D.Y. Kim, J.J. Park, J.G. Lee, D. Kim, S.J. Tark, S. Ahn, J.H. Yun, J. Gwak, K.H. Yoon, S. Chandra, and S.S. Yoon: J. Therm. Spray Technol., 2013, vol. 22, pp. 1092–1102.10.1007/s11666-013-9953-4 ↗
11. B. Kang, K.D. Lee, J.-G. Lee, J.-W. Choi, S.S. Yoon, Y. Kang, H.-S. Lee, and D. Kim: J. Therm. Spray Technol., 2016, vol. 25, pp. 465–72.10.1007/s11666-015-0349-5 ↗
12. J.G. Lee, B.N. Joshi, J.H. Lee, T.G. Kim, D.Y. Kim, S.S. Al-Deyab, I.W. Seong, M.T. Swihart, W.Y. Yoon, and S.S. Yoon: Electrochim. Acta, 2017, vol. 228, pp. 604–10.10.1016/j.electacta.2017.01.116 ↗
13. E. Samuel, J.G. Lee, B. Joshi, T.G. Kim, M.W. Kim, I.W. Seong, W.Y. Yoon, and S.S. Yoon: J. Alloys Compd., 2017, vol. 715, pp. 161–69.10.1016/j.jallcom.2017.04.308 ↗
14. B. Joshi, J.G. Lee, E. Samuel, H.S. Jo, T.G. Kim, M.T. Swihart, W.Y. Yoon, and S.S. Yoon: J. Alloys Compd., 2017, vol. 726, pp. 114–20.10.1016/j.jallcom.2017.07.306 ↗
15. T.G. Kim, E. Samuel, B. Joshi, C.W. Park, M.W. Kim, M.T. Swihart, W.Y. Yoon, and S.S. Yoon: J. Alloys Compd., 2018, vol. 766, pp. 331–40.10.1016/j.jallcom.2018.06.231 ↗
16. J.G. Lee, D.Y. Kim, B. Kang, D. Kim, S.S. Al-Deyab, S.C. James, and S.S. Yoon: Comput. Mater. Sci., 2015, vol. 108, pp. 114–20.10.1016/j.commatsci.2015.06.016 ↗
17. H. Assadi, H. Kreye, F. Gärtner, and T. Klassen: Acta Mater., 2016, vol. 116, pp. 382–407.10.1016/j.actamat.2016.06.034 ↗
18. M. Hassani-Gangaraj, D. Veysset, V.K. Champagne, K.A. Nelson, and C.A. Schuh: Acta Mater., 2018, vol. 158, pp. 430–39.10.1016/j.actamat.2018.07.065 ↗
19. M. Hassani-Gangaraj, D. Veysset, K.A. Nelson, and C.A. Schuh: Appl. Surf. Sci., 2019, vol. 476, pp. 528–32.10.1016/j.apsusc.2019.01.111 ↗
20. C.-J. Li, H.-T. Wang, Q. Zhang, G.-J. Yang, W.-Y. Li, and H.L. Liao: J. Therm. Spray Technol., 2009, vol. 19, pp. 95–101.10.1007/s11666-009-9427-x ↗
21. Y. Ichikawa, K. Ogawa, Y. Ichikawa, and K. Ogawa: JTST, 2015, vol. 24, pp. 1269–76.10.1007/s11666-015-0299-y ↗
22. K.H. Kim, W. Li, and X. Guo: Appl. Surf. Sci., 2015, vol. 357, pp. 1720–26.10.1016/j.apsusc.2015.10.022 ↗
23. Y. Xie, S. Yin, C. Chen, M.P. Planche, H. Liao, and R. Lupoi: Scr. Mater., 2016, vol. 125, pp. 1–4.10.1016/j.scriptamat.2016.07.024 ↗
24. Y. Ichikawa, R. Tokoro, M. Tanno, and K. Ogawa: Acta Mater., 2019, vol. 164, pp. 39–49.10.1016/j.actamat.2018.09.041 ↗
25. J. Lienhard, C. Crook, M.Z. Azar, M. Hassani, D.R. Mumm, D. Veysset, D. Apelian, K.A. Nelson, V. Champagne, A. Nardi, C.A. Schuh, and L. Valdevit: Acta Mater., 2020, vol. 197, pp. 28–39.10.1016/j.actamat.2020.07.011 ↗
26. B. Barnett, M. Trexler, and V. Champagne: Int. J. Refract. Met. Hard Mater., 2015, vol. 53, pp. 139–43.10.1016/j.ijrmhm.2015.07.007 ↗
27. A. Nifa, L. Berthe, M. Boustie, L.L. Descurninges, M. Jeandin, J. Bénier, and P. Mercier: Int. Congr. Appl. Lasers Electro-Opt., 2018, vol. 2012, p. 633.
28. J.V.S.N. Sripada, M.F. Gallant, G.C. Saha, R. Singh, and J. Kondas: Key Eng. Mater., 2019, vol. 813, pp. 429–34.10.4028/www.scientific.net/KEM.813.429 ↗
29. S.M. Cardonne, P. Kumar, C.A. Michaluk, and H.D. Schwartz: Int. J. Refract. Met. Hard Mater., 1995, vol. 13, pp. 187–94.10.1016/0263-4368(95)94023-R ↗
30. P.F. Weck and E. Kim: Phys. Chem. Chem. Phys, 2016, vol. 18, pp. 26816–26.10.1039/C6CP05479J ↗
31. R. Sakanoi, T. Shimazaki, J. Xu, Y. Higuchi, N. Ozawa, K. Sato, T. Hashida, and M. Kubo: J. Chem. Phys., 2014, vol. 140, p. 121102.10.1063/1.4869515 ↗
32. Y.N. Wu, L. Li, and H.P. Cheng: Phys. Rev. B, 2011, vol. 83, p. 144105.10.1103/PhysRevB.83.144105 ↗
33. P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. Chiarotti, M. Cococcioni, I. Dabo, A. Dal Corso, S. de Gironcoli, S. Fabris, G. Fratesi, R. Gebauer, U. Gerstmann, C. Gougoussis, A. Kokalj, M. Lazzeri, L. Martin-Samos, N. Marzari, F. Mauri, R. Mazzarello, S. Paolini, A. Pasquarello, L. Paulatto, C. Sbraccia, S. Scandolo, G. Sclauzero, A. Seitsonen, A. Smogunov, P. Umari, and R. Wentzcovitch: J. Phys., 2009, vol. 21, p. 395502.
34. R. Ovcharenko, E. Voloshina, and J. Sauer: Phys. Chem. Chem. Phys., 2016, vol. 18, pp. 25560–68.10.1039/C6CP05313K ↗
35. F. Kraushofer, Z. Jakub, M. Bichler, J. Hulva, P. Drmota, M. Weinold, M. Schmid, M. Setvin, U. Diebold, P. Blaha, and G.S. Parkinson: J. Phys. Chem. C, 2018, vol. 122, pp. 1657–69.10.1021/acs.jpcc.7b10515 ↗
36. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye: Acta Mater., 2003, vol. 51, pp. 4379–94.10.1016/S1359-6454(03)00274-X ↗
37. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye: Acta Mater., 2006, vol. 54, pp. 729–42.10.1016/j.actamat.2005.10.005 ↗
38. M. Hassani-Gangaraj, D. Veysset, K.A. Nelson, and C.A. Schuh: Scripta Mater., 2018, vol. 145, pp. 9–13.10.1016/j.scriptamat.2017.09.042 ↗
39. G.Z. Voyiadjis and F.H. Abed: Mech. Mater., 2005, vol. 37, pp. 355–78.10.1016/j.mechmat.2004.02.003 ↗
40. J.B. Kim and H. Shin: Int. J. Impact Eng., 2009, vol. 36, pp. 746–53.10.1016/j.ijimpeng.2008.11.003 ↗
41. A. Navabi, M. Vandadi, T. Bond, V. Rahneshin, J. Obayemi, R. Ahmed, J.E. Oghenevweta, V. Champagne, N. Rahbar, and W.O. Soboyejo: Mater. Sci. Eng. A, 2022, vol. 841, p. 143036.10.1016/j.msea.2022.143036 ↗
42. V. Lemiale, P.C. King, M. Rudman, M. Prakash, P.W. Cleary, M.Z. Jahedi, and S. Gulizia: Surf. Coat. Technol., 2014, vol. 254, pp. 121–30.10.1016/j.surfcoat.2014.05.071 ↗
43. D.G. Westlake: Scr. Metall., 1977, vol. 11, pp. 689–92.10.1016/0036-9748(77)90140-5 ↗
44. Z.L. Kowalewski, Z. Nowak, and R.B. Pęcherski: 1999, pp. 174–83.
45. A. Dorogoy and D. Rittel: Mech. Mater., 2017, vol. 112, pp. 143–53.10.1016/j.mechmat.2017.06.003 ↗
46. J.P. Delplanque, W.D. Cai, R.H. Rangel, and E.J. Lavernia: Acta Mater., 1997, vol. 45, pp. 5233–43.10.1016/S1359-6454(97)00166-3 ↗
47. G.R. Johnson and W.H. Cook: .@Inproceedings {Johnson2018ACM}.
48. Y.B. Guo and D.W. Yen: J. Mater. Process. Technol., 2004, vol. 155–156, pp. 1350–56.10.1016/j.jmatprotec.2004.04.210 ↗
49. T. Özel and E. Zeren: Int. J. Adv. Manuf. Technol., 2006, vol. 35, pp. 255–67.10.1007/s00170-006-0720-2 ↗
50. L.E. Kinsler, A.R. Frey, A.B. Coppens, and J.V. Sanders: Wiley, New York, 1999, p. 560.
51. W.J. Rankine II.: Philos. Trans. R. Soc. Lond., 1857, vol. 147, pp. 9–27.
52. A cracking model for concrete and other brittle materials, https://abaqus-docs.mit.edu/2017/English/SIMACAETHERefMap/simathe-c-cracking.htm, (Accessed 26 December 2021).
53. H.C. Thomas: Mechanical Behavior of Materials, Waveland Press, Long Grove, 2005.
54. Z.H.J.C.T. Sun: Fracture Mechanics, Academic Press, Waltham, 2012.
55. Y. Guo, S.J. Clark, and J. Robertson: J. Phys. Condens. Matter, 2012, vol. 24, p. 325504.10.1088/0953-8984/24/32/325504 ↗
56. P. Liao and E.A. Carter: J. Mater. Chem., 2010, vol. 20, pp. 6703–19.10.1039/c0jm01199a ↗
57. M.R. Abernathy, J.E. Faller, J. Hough, O. Hudson, C. Lynn, I.W. Martin, M. Oyen, S. Rowan, T. Shean, and D. Strange: Appl. Opt., 2014, vol. 53, pp. 3196–3202.10.1364/AO.53.003196 ↗
58. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch: Mater. Des., 2004, vol. 25, pp. 681–88.10.1016/j.matdes.2004.03.008 ↗
59. S. Sulaiman, A. Roshan, and M.K.A. Ariffin: IOP Conf. Ser. Mater. Sci. Eng., 2013, vol. 50, p. 012040.10.1088/1757-899X/50/1/012040 ↗
60. S. Dosta, G. Bolelli, A. Candeli, L. Lusvarghi, I.G. Cano, and J.M. Guilemany: Acta Mater., 2017, vol. 124, pp. 173–81.10.1016/j.actamat.2016.11.010 ↗
61. J. Xie, D. Nélias, H.W. Le Berre, K. Ogawa, and Y. Ichikawa: J. Tribol., 2015, vol. 137, p. 041101.10.1115/1.4030257 ↗
62. T. Hussain, D.G. Mccartney, P.H. Shipway, and D. Zhang: J. Therm. Spray Technol., 2009, vol. 18, pp. 364–79.10.1007/s11666-009-9298-1 ↗
63. S. Singh, R.K.S. Raman, C.C. Berndt, and H. Singh: Metals, 2021, vol. 11, p. 12.
64. M. Kamaraj and V.M. Radhakrishnan: J. Therm. Spray Technol., 2019, vol. 28, pp. 756–68.10.1007/s11666-019-00853-5 ↗
65. H. Assadi, T. Schmidt, H. Richter, J.-O. Kliemann, K. Binder, F. Gärtner, T. Klassen, and H. Kreye: J. Therm. Spray Technol., 2011, vol. 20, pp. 1161–76.10.1007/s11666-011-9662-9 ↗
66. W.-Y. Li, C. Zhang, C.-J. Li, and H. Liao: J. Therm. Spray Technol., 2009, vol. 18, p. 921.10.1007/s11666-009-9325-2 ↗
67. H. Masumoto, A. Asa’da, H. Hasuyama, K. Nishio, M. Kato, and S. Mukae: Weld. Int., 2010, vol. 11, pp. 110–20.10.1080/09507119709447324 ↗
68. A. Fardan, C.C. Berndt, and R. Ahmed: Surf. Coat. Technol., 2021, vol. 409, p. 126835.10.1016/j.surfcoat.2021.126835 ↗
69. A.A. Hemeda, C. Zhang, X.Y. Hu, D. Fukuda, D. Cote, I.M. Nault, A. Nardi, V.K. Champagne, Y. Ma, and J.W. Palko: Addit. Manuf., 2021, vol. 37, p. 101517.