journal article·2022-06

Role of Substitution of Ni by Co During Isothermal Aging of Superaustenitic Stainless Steels: Precipitation Behavior and Phase Transformations

Luhai Liao, Jingyuan Li, Fanghong Xu, Wei Zhang

Publisher page

Abstract

The precipitation of second phases after inappropriate heat treatment or exposure at elevated temperatures is detrimental for hot forming properties and weldability of superaustenitic stainless steels. The influence of Co with respect to this so called instability in high-alloyed stainless steels has not been studied yet. In present paper the precipitation behavior is investigated in three experimental alloys (one with 22 wt pct Ni, one with 20 wt pct Ni+2 wt pct Co and one with 18 wt pct Ni+4 wt pct Co) to clarify the mechanism of substitution of Ni by Co. It is confirmed that 2 wt pct Co addition impedes the phase transformation and decreases the area fraction of precipitates at all heat treatment. The formation of σ phase is not decelerated but accelerated by replacement of 4 wt pct Co for 4 wt pct Ni. The results from microstructure observation show the size of the needle-like σ precipitates in two alloys containing Co is significantly smaller than that in the Co-free alloys. In addition, a small amount of cellular precipitation was observed in 20Ni2Co after 2h aging at 900 °C. Similar cellular precipitation can be detected in 22Ni and 18Ni4Co after only 1h of aging. The reason resulting in this phenomenon may be the difference of grain size of alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. H.K. Lo, C.H. Shek, and J. Lai: Mater. Sci. Eng., R, 2009, vol. 65, pp. 39–104.10.1016/j.mser.2009.03.001 ↗
2. D.M.E. Villanueva, F.C.P. Junior, R.L. Plaut, and A.F. Padilha: Mater. Sci. Technol., 2006, vol. 22, pp. 1098–1104.10.1179/174328406X109230 ↗
3. S. Nagarajan and R. Nallaiyan: Corros. Sci., 2009, vol. 51, pp. 217–24.10.1016/j.corsci.2008.11.008 ↗
4. H.B. Li, Z.H. Jiang, H. Feng, S.C. Zhang, P.D. Han, W. Zhang, G.P. Li, and G.W. Fan: Int. J. Electrochem. Sci., 2015, vol. 10, pp. 4832–48.10.1016/S1452-3981(23)06669-5 ↗
5. B. Wallén, M. Liljas, and P. Stenvall: Mater. Corros., 1993, vol. 44, pp. 83–88.10.1002/maco.19930440305 ↗
6. H.B. Li, C.T. Yang, E.Z. Zhou, C.G. Yang, H. Feng, Z.H. Jiang, D.K. Gu, and K. Yang: J. Mater. Sci. Technol., 2017, vol. 33, pp. 166–73.10.1016/j.jmst.2016.12.002 ↗
7. T.H. Lee, S.J. Kim, and Y.C. June: Metall. Mater. Trans. A., 2000, vol. 31, pp. 1713–23.10.1007/s11661-998-0332-6 ↗
8. Y. Hao, G. Cao, C. Li, J. Li, W. Liu, W. Zhang, and Z. Liu: Mater. Charact., 2019, vol. 147, pp. 21–30.10.1016/j.matchar.2018.10.015 ↗
9. G. Mori and D. Bauernfeind: Mater. Corros., 2015, vol. 55, pp. 164–73.10.1002/maco.200303746 ↗
10. R. Marin, H. Combeau, J. Zollinger, M. Dehmas, and L. Lhenry-Robert: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 3526–34.10.1007/s11661-020-05794-1 ↗
11. T. Koutsoukis, A. Redjaïmia, and G. Fourlaris: Mater. Sci. Eng. A., 2013, vol. 561, pp. 47–485.10.1016/j.msea.2012.10.066 ↗
12. Z. Song and E. Pu: ISIJ Int., 2017, vol. 24, pp. 742–49.
13. S. Zhang, Z. Jiang, H. Li, B. Zhang, S. Fan, Z. Li, H. Feng, and H. Zhu: Mater. Charact., 2018, vol. 137, pp. 244–55.10.1016/j.matchar.2018.01.040 ↗
14. C. Lee, S. Roh, C. Lee, and S. Hong: Mater. Chem. Phys., 2018, vol. 207, pp. 91–97.10.1016/j.matchemphys.2017.12.055 ↗
15. S. Zhang, H. Li, Z. Jiang, Z. Li, J. Wu, B. Zhang, F. Duan, H. Feng, and H. Zhu: J. Mater. Sci. Technol., 2020, vol. 42, pp. 142–55.10.1016/j.jmst.2019.12.021 ↗
16. S. Heino: Metall. Mater. Trans. A., 2000, vol. 31A, pp. 1893–1905.10.1007/s11661-000-0217-9 ↗
17. S.H. Mousavi Anijdan and A. Bahrami: Mater. Sci. Eng. A., 2005, vol. 396, pp. 138–42.10.1016/j.msea.2005.01.012 ↗
18. J.X. Yang, Q. Zheng, X.F. Sun, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A., 2007, vol. 465, pp. 100–08.10.1016/j.msea.2007.01.152 ↗
19. C.M.F. Rae and R.C. Reed: Acta Mater., 2001, vol. 49, pp. 4113–25.10.1016/S1359-6454(01)00265-8 ↗
20. T.H. Lee, H.Y. Ha, B. Hwang, and S.J. Kim: Metall. Mater. Trans. A., 2021, vol. 43A, pp. 822–32.
21. K. Matuszewski, R. Rettig, H. Matysiak, Z. Peng, I. Povstugar, P. Choi, J. Müller, D. Raabe, E. Spiecker, K.J. Kurzydłowski, and R.F. Singer: Acta Mater., 2015, vol. 95, pp. 274–83.10.1016/j.actamat.2015.05.033 ↗
22. J.S. Hou, J.T. Guo, Y.X. Wu, L.Z. Zhou, and H.Q. Ye: Mater. Sci. Eng. A., 2010, vol. 527, pp. 1554–84.
23. T. Koutsoukis, A. Redjaïmia, and G. Fourlaris: Solid State Phenom., 2011, vol. 172, pp. 493–98.10.4028/www.scientific.net/SSP.172-174.493 ↗
24. J.W. Simmons, B.S. Covino Jr., J.A. Hawk, and J.S. Dunning: ISIJ Int., 1996, vol. 36, pp. 846–54.10.2355/isijinternational.36.846 ↗
25. T.H. Lee, S.J. Kim, and S. Takaki: Metall. Mater. Trans. A., 2006, vol. 37A, pp. 3445–54.10.1007/s11661-006-1040-8 ↗
26. S. Heino, E.M. Knutson-Wedel, and B. Karlsson: Mater. Sci. Technol., 1999, vol. 15, pp. 101–08.10.1179/026708399773003376 ↗
27. T. Sourmail and H.K. Bhadeshia: Calphad., 2003, vol. 27, pp. 169–75.10.1016/j.calphad.2003.08.002 ↗
28. Y. Hayakawa and J.A. Szpunar: Acta Mater., 1997, vol. 45, pp. 1285–95.10.1016/S1359-6454(96)00251-0 ↗
29. L.N. Zhang, J.A. Szpunar, and R. Basu: J. Alloys Compd., 2014, vol. 616, pp. 235–42.10.1016/j.jallcom.2014.07.099 ↗
30. N.C.S. Srinivas and V.V. Kutumbarao: Scr. Mater., 1997, vol. 37, pp. 285–91.10.1016/S1359-6462(97)00112-7 ↗
31. M. Kikuchi, M. Kajihara, and S.K. Choi: Mater. Sci. Eng. A., 1991, vol. A146, pp. 131–50.10.1016/0921-5093(91)90273-P ↗
32. L.G. Zheng, X.Q. Hu, X.H. Kang, and D.Z. Li: Mater. Des., 2015, vol. 78, pp. 42–45.10.1016/j.matdes.2015.04.016 ↗
33. R.D. Knutsen, C.I. Lang, and J.A. Basson: Acta Mater., 2004, vol. 52, pp. 2407–17.10.1016/j.actamat.2004.01.031 ↗
34. T. Koutsoukis, E.G. Papadopoulou, S. Zormalia, P. Kokkonidis, and G. Fourlaris: Mater. Sci. Technol., 2010, vol. 26, pp. 1041–47.10.1179/026708309X12506933872748 ↗
35. B. Weiss and R. Stickler: Metall. Mater. Trans. B., 1972, vol. 3B, pp. 851–66.10.1007/BF02647659 ↗
36. P.E.J. Rivera and H.K.D. Bhadeshia: Metall. Mater. Trans. A., 2002, vol. 33A, pp. 1075–81.10.1007/s11661-002-0209-z ↗
37. J. Anburaj, S.S. Mohamed Nazirudeen, R. Narayanan, B. Anandavel, and A. Chandrasekar: Mater. Sci. Eng. A., 2012, vol. 535, pp. 99–107.10.1016/j.msea.2011.12.048 ↗
38. A.R. Akisanya, U. Obi, and N.C. Renton: Mater. Sci. Eng. A., 2012, vol. 535, pp. 281–89.10.1016/j.msea.2011.12.087 ↗
39. H.H. Lu, Y. Luo, H.K. Guo, W.Q. Li, J.C. Li, and W. Liang: Mater. Sci. Eng. A., 2018, vol. 735, pp. 31–39.10.1016/j.msea.2018.08.031 ↗
40. H.Y. Ha and H.S. Kwon: Electrochim. Acta., 2007, vol. 52, pp. 2175–80.10.1016/j.electacta.2006.08.034 ↗
41. J. Moon, H.H. Jo, H.Y. Ha, S.D. Kim, and C.H. Lee: J. Mater. Res. Technol., 2021, vol. 14. https://doi.org/10.1016/j.jmrt.2021.06.07510.1016/j.jmrt.2021.06.075 ↗
42. R. Mukherjee, T.A. Abinandanan, and M.P. Gururajan: Scr. Mater., 2010, vol. 62, pp. 85–88.10.1016/j.scriptamat.2009.09.030 ↗
43. K.S. Kim, J.H. Kang, and S.J. Kim: Mater. Sci. Eng. A., 2018, vol. 712, pp. 114–21.10.1016/j.msea.2017.11.099 ↗
44. W. Xu, D.S. Martin, P.E.J. Rivera, and S. Zwaag: Mater. Sci. Eng. A., 2007, vol. 467, pp. 24–32.10.1016/j.msea.2007.02.071 ↗
45. A.J. Strutt and K.S. Vecchio: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 355–62.10.1007/s11661-999-0324-1 ↗
46. S.H. Jeon, S.T. Kim, I.S. Lee, J.S. Kim, K.T. Kim, and Y.S. Park: Corros. Sci., 2013, vol. 66, pp. 217–24.10.1016/j.corsci.2012.09.023 ↗
47. M.J. Cieslak, G.A. Knorovsky, T.J. Headley, and A.D. Romig: Mater. Trans. A., 1986, vol. 17, pp. 2107–16.10.1007/BF02645909 ↗
48. S. Fukumoto, Y. Oikawa, S. Tsuge, and S. Nomoto: ISIJ Int., 2010, vol. 50, pp. 445–49.10.2355/isijinternational.50.445 ↗
49. S. Sulzer and R. Reed: Mater. Sci. Technol., 2018, vol. 34, pp. 2174–2201.10.1080/02670836.2018.1528733 ↗