Effects of Microstructure and Material Composition on the Formation Kinetics of Passive Film and Pitting Behavior of Super 13Cr Stainless Steel
Source abstract
Abstract
The effects of the microstructure and material composition on the formation kinetics of passive film and pitting behavior of super 13Cr stainless steel (S13Cr SS) were investigated and compared with those of 2Cr13 stainless steel (2Cr13 SS). The results indicated that the passive film formed on S13Cr SS surface quickly reached a stable state, which was attributed to two reasons. The small grain size coupled with the high dislocations density increased the number of nucleation sites for passive film formation, and the high material composition enhanced the Cr and Mo compound contents in the passive film. The passive film on S13Cr SS was more compact and thicker than that on 2Cr13 SS. The pit depth on S13Cr SS was relatively shallow after potentiodynamic polarization. Therefore, the protective properties of the passive film on S13Cr SS increased, and the pitting corrosion resistance of S13Cr SS was enhanced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. [1] Y. Hua, S. Mohammed, R. Barker, and A. Neville: J. Mater. Sci. Technol., 2020, vol. 41, pp. 21-32.10.1016/j.jmst.2019.08.050 ↗
2. [2] H. Zhang, Y.L. Zhao, and Z.D. Jiang: Mater. Lett., 2005, vol. 59, pp. 3370-74.10.1016/j.matlet.2005.06.002 ↗
3. [3] T. Sunaba, T. Ito, Y. Miyata, S. Asakura, T. Shinohara, T. Yakou, Y. Tomoe, and H. Honda: Corrosion., 2014, vol. 70, pp. 988-999.10.5006/1141 ↗
4. [4] T. Doi, T. Adachi, T. Kudo, and N. Usuki: Corros. Sci., 2020, vol. 177, pp. 108931.10.1016/j.corsci.2020.108931 ↗
5. [5] X.Q. Yue, L. Zhang, C. Sun, S.S. Xu, C. Wang, M.X. Lu, A. Neville, and Y. Hua: Corros. Sci., 2020, vol. 169, pp. 108640.10.1016/j.corsci.2020.108640 ↗
6. [6] Y. Zhao, J.F. Xie, G.X. Zeng, T. Zhang, D.K. Xu, and F.H. Wang: Electrochim. Acta, 2019, vol. 293, pp. 116-27.10.1016/j.electacta.2018.08.156 ↗
7. [7] M. Javidi, S.M.S Haghshenas, and M.H. Shariat: Corros. Sci., 2020, vol. 163, pp. 108230.10.1016/j.corsci.2019.108230 ↗
8. [8] H.J. Lee, S.H. Kim, and C. Jang: Mater. Charact., 2018, vol. 138, pp. 245-54.10.1016/j.matchar.2018.02.025 ↗
9. [9] R.P. Oleksak, J.P. Baltrus, L. Teeter, M. Ziomek-Moroz, and Ö.N. Doğan: Corrosion., 2018, vol. 74, pp. 1047-53.10.5006/2726 ↗
10. [10] R.P. Oleksak, J.H. Tylczaka, G.R. Holcomba, and Ö.N. Doğana: Corros. Sci., 2020, vol. 164, pp. 108316.10.1016/j.corsci.2019.108316 ↗
11. [11] Y.G. Zhao, W. Liu, Y.M. Fan, E.D. Fan, B.J. Dong, T.Y. Zhang, and X.G. Li: Corros. Sci., 2020, vol. 168, pp. 108591.10.1016/j.corsci.2020.108591 ↗
12. Wang L, Dong C, Yu Q, Man C, Hu Y, Dai Z, Li X: Metall. Mater. Trans. A., 2019, vol. 50, pp. 388-400.10.1007/s11661-018-4973-9 ↗
13. [13] L.N. Xu, X.Q. Xu, C.X. Yin, and L.J. Qiao: Mater. Res. Express., 2019, vol. 6, pp. 096512.10.1088/2053-1591/ab2bbb ↗
14. [14] L. Wei, X.L. Pang, and K.W. Gao: Corros. Sci., 2016, vol. 111, pp. 637-48.10.1016/j.corsci.2016.06.003 ↗
15. [15] K.H. Jung and S.J. Kim: Appl. Surf. Sci., 2019, vol. 483, pp. 417-24.10.1016/j.apsusc.2019.03.272 ↗
16. [15] X. Qi, H.H. Mao, and Y.T. Yang: Corros. Sci., 2017, vol. 120, pp. 90-98.10.1016/j.corsci.2017.02.027 ↗
17. [16] B.S. Kumar, V. Kain, and B. Vishwanadh: Corrosion., 2017, vol. 73, pp. 362-78.10.5006/2141 ↗
18. X.P. Li, Y. Zhao, W.L. Qi, J.F. Xie, J.D. Wang, B. Liu, G.X. Zeng, T. Zhang, and F.H. Wang: Appl. Surf. Sci., 2019, vol. 469, pp. 146-61.10.1016/j.apsusc.2018.10.237 ↗
19. [18] W. Liu, S.L. Lu, P. Zhang, J.J. Dou, and Q.H. Zhao: Appl. Surf. Sci., 2016, vol. 379, pp. 163-70.10.1016/j.apsusc.2016.04.044 ↗
20. [19] W. Liu, J.J. Dou, S.L. Lu, P. Zhang, and Q.H. Zhao: Appl. Surf. Sci., 2016, vol. 367, pp. 438-48.10.1016/j.apsusc.2016.01.228 ↗
21. [20] C. Man, C.F. Dong, T.T. Liu, D.C. Kong, D.K. Wang, and X.G. Li: Appl. Surf. Sci., 2019, vol. 467-468, pp. 193-205.10.1016/j.apsusc.2018.10.150 ↗
22. [21] S.Y. Lu, K.F. Yao, Y.B. Chen, M.H. Wang, N. Chen, and X.Y. Ge: Corros. Sci., 2016, vol. 103, pp. 95-104.10.1016/j.corsci.2015.11.010 ↗
23. [22] V.B. Singh and M. Ray: J. Mater. Sci., 2007, vol. 42, pp. 8279-86.10.1007/s10853-007-1644-4 ↗
24. [23] A. Fattah-Alhosseini and S. Vafaeian: J. Alloy. Compd., 2015, vol. 639, pp. 301-07.10.1016/j.jallcom.2015.03.142 ↗
25. [24] J.B. Sun, G.A. Zhang, W. Liu, and M.X. Lu: Corros. Sci., 2012, vol. 57, pp. 131-38.10.1016/j.corsci.2011.12.025 ↗
26. [25] Y.M. Fan, W. Liu, S.M. Li, W. Banthukul, Y.G. Zhao, B.J. Dong, T.Y. Zhang, T. Chowwanonthapunya, and X.G. Li: J. Mater. Sci. Technol., 2020, vol. 39, pp. 190-99.10.1016/j.jmst.2019.07.054 ↗
27. [26] A.F. Avelino, W.S. Araújo, D.F. Dias, L.P.M. dos Santos, A.N. Correia, and P.D. Lima-Neto: Electrochim. Acta, 2018, vol. 286, pp. 339-49.10.1016/j.electacta.2018.08.042 ↗
28. [27] Z.H. Dong, T. Zhu, W. Shi, and X.P. Guo: Acta Phys. Chim. Sin., 2011, vol. 27, pp. 905-12.10.3866/PKU.WHXB20110336 ↗
29. [28] A.B. Kalea, B. Kim, D. Kim, E.G. Castle, M. Reece, and S. Choi: Mater. Lett., 2020, vol. 63, pp. 110204.
30. [29] T. Nishimura: Corros. Sci., 2010, vol. 52, pp. 3609-14.10.1016/j.corsci.2010.07.006 ↗
31. [30] D.D. Macdonald: Electrochim. Acta, 2011, vol. 56, pp. 1761-72.10.1016/j.electacta.2010.11.005 ↗
32. [31] M.E. Orazem, I. Frateur, B. Tribollet, V. Vivier, S. Marcelin, N. Pébère, A.L. Bunge, E.A. White, D.P. Riemer, and M. Musiani: J. Electrochem. Soc., 2013, vol. 160, pp. C215-C225.10.1149/2.033306jes ↗
33. [32] Y.G. Zhao, W. Liu, W. Banthukul, Y.M. Fan, and X.G. Li: Corros. Eng. Sci. Techn., 2020, vol. 55, pp. 205-16.10.1080/1478422X.2020.1713533 ↗
34. [33] S.Q. Guo, L.N. Xu, L. Zhang, W. Chang, and M.X. Lu: Corros. Sci., 2016, vol. 110, pp. 123-33.10.1016/j.corsci.2016.04.033 ↗
35. [34] R.H. Jung, H. Tsuchiya, and S. Fujimoto: Corros. Sci., 2012, vol. 58, pp. 62-68.10.1016/j.corsci.2012.01.006 ↗
36. [35] R.V. Shankar and L.K. Singhal: J. Mater. Sci., 2009, vol. 44, pp. 2327-33.10.1007/s10853-008-2976-4 ↗
37. [36] B.J. Dong, W. Liu, Y. Zhang, W. Banthukul, Y.G. Zhao, T.Y. Zhang, Y.M. Fan, and X.G. Li: J. Nat. Gas. Sci. Eng., 2020, vol. 80, pp. 103371.10.1016/j.jngse.2020.103371 ↗
38. [37] H. Luo, C.F. Dong, X.G. Li, and K. Xiao: Electrochim. Acta, 2012, vol. 64, pp. 211-20.10.1016/j.electacta.2012.01.025 ↗
39. [38] F.F.L. Wegrelius and I. Olefjord: J. Electrochem. Soc., 1999, vol. 146, pp. 1397-1406.10.1149/1.1391777 ↗
40. [39] J.B. Huang, X.Q. Wu, and E.H. Han: Corros. Sci., 2010, vol. 52, pp. 3444-52.10.1016/j.corsci.2010.06.016 ↗
41. [40] J. Xu, X.Q. Wu, and E.H. Han: Electrochim. Acta, 2012, vol. 71, pp. 219-26.10.1016/j.electacta.2012.03.148 ↗
42. [41] D.C. Kong, X.Q. Ni, C.F. Dong, L. Zhang, C. Man, J.Z. Yao, K. Xiao, and X.G. Li: Electrochim. Acta, 2018, vol. 276, pp. 293-303.10.1016/j.electacta.2018.04.188 ↗
43. [42] C. Zhang, K.C. Chan, Y. Wu, and L. Liu: Acta. Mater., 2012, vol. 60, pp. 4152-59.10.1016/j.actamat.2012.04.005 ↗
44. [43] H.C Tian, X.Q. Chen, Y. Wang, C.F. Dong, and X.G. Li: Electrochim. Acta, 2018, vol. 267, pp. 255-68.10.1016/j.electacta.2018.02.082 ↗
45. [44] X.Q. Yue, L. Zhang, Y. Wang, S.S. Xu, C. Wang, M.X. Lu, A. Neville, and Y. Hua: Corros. Sci., 2020, vol. 163, pp. 108277.10.1016/j.corsci.2019.108277 ↗
46. [45] X.Q. Yue, L. Zhang, L. Ma, M.X. Lu, A. Neville, and Y. Hua: Corros. Sci., 2021, vol. 178, pp. 108983.10.1016/j.corsci.2020.108983 ↗
47. [46] K. Chandra, V. Kain, and R. Tewari: Corros. Sci., 2013, vol. 67, pp. 118-29.10.1016/j.corsci.2012.10.011 ↗
48. [47] Y.S. Choi, J.G. Kim, Y.S. Park, and J.Y. Park: Mater. Lett., 2007, vol. 61, pp. 244-47.10.1016/j.matlet.2006.04.041 ↗
49. [48] J.B. Lee and S.I. Yoon: Mater. Chem. Phys., 2010, vol. 122, pp. 194-99.10.1016/j.matchemphys.2010.02.033 ↗
50. [49] Z.G. Liu, X.H. Gao, L.X. Du, J.P. Li, Y. Kuang, and B.Wu: Appl. Surf. Sci., 2015, vol. 351, pp. 610-23.10.1016/j.apsusc.2015.06.006 ↗
51. [50] P. Erazmus-Vignal, V. Vignal, S. Saedlou, and F. Krajcarz: Corros. Sci., 2015, vol. 99, pp. 194-204.10.1016/j.corsci.2015.07.005 ↗
52. [51] S.C. Zhang, H.B. Li, Z.H. Jiang, B.B. Zhang, Z.X. Li, J.X. Wu, S.P. Fan, H. Feng, and H.C. Zhu: Mater. Charact., 2019, vol. 152, pp. 141-50.10.1016/j.matchar.2019.04.010 ↗
53. [52] L. Mao, G.Y. Yuan, S.H. Wang, J.L. Niu, G.H. Wu, and W.J. Ding: Mater. Lett., 2012, vol. 88, pp. 1-4.10.1016/j.matlet.2012.08.012 ↗
54. [53] H.J. Kim, S.H. Jeon, S.T. Kim, I.S. Lee, Y.S. Park, K.T. Kim, and Y.S. Kim: Corros. Sci., 2014, vol. 87, pp. 60-70.10.1016/j.corsci.2014.06.005 ↗
55. [54] S.K. Bonagani, V. Bathula, and V. Kain: Corros. Sci., 2018, vol. 131, pp. 340-54.10.1016/j.corsci.2017.12.012 ↗
56. [55] S.N. Geng, J.S. Sun, L.Y. Guo, and H.Q. Wang: J. Manuf. Process., 2015, vol. 19, pp. 32-37.10.1016/j.jmapro.2015.03.009 ↗
57. [56] C.O.A. Olsson, and D. Landolt: Electrochim. Acta, 2003, vol. 48, pp. 1093-1104.10.1016/S0013-4686(02)00841-1 ↗