journal article·2020-09Open access

In Situ Analysis of the Thermal Evolution of Electrodeposited Fe-C Coatings

Jacob Obitsø Nielsen, Thomas Lundin Christiansen, Karen Pantleon

Abstract

Fe-C coatings with a high amount of carbon were electrodeposited from an iron-sulfate electrolyte. Citric acid as an additive in the electrolyte not only served as a carbon source during electrodeposition but also caused the reproducible codeposition of oxygen and hydrogen. The various codeposited elements (C, O, H) result in the complex nature of the as-deposited coatings and allow for deliberate alterations of the coating properties by postdeposition annealing. The thermal evolution of electrodeposited Fe-C coatings was investigated in situ during isochronal annealing. In situ synchrotron diffraction analysis revealed temperature-dependent phase transformations, which were supplemented with in situ thermal analysis for investigating the evolution of codeposited elements and associated mass changes during annealing. Based on the determined activation energies of identified thermal events, the underlying mechanisms are discussed. The results clearly indicate the role of codeposited elements in the coatings and suggest that they partly exist in the form of organic compounds, which decompose during annealing. In addition to revealing the thermal stability of the coatings and quantifying the coatings’ thermal evolution, the complementary methods of in situ analysis considerably improved the understanding of the as-deposited Fe-C coatings—both are essential prerequisites for the successful application of the Fe-C coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. M. Izaki, H. Enomoto, and T. Omi: J. Surf. Fin. Soc. Jpn., 1989, vol. 40, pp. 1304–05.10.4139/sfj.40.1304 ↗
2. Y. Fujiwara, T. Nagayama, A. Nakae, M. Izaki, H. Enomoto, and E. Yamauchi: J. Electrochem. Soc., 1996, vol. 143, pp. 2584–90.10.1149/1.1837051 ↗
3. M. Panayotova: Surf. Coat. Technol., 2000, vol. 124, pp. 266–71.10.1016/S0257-8972(99)00647-7 ↗
4. A.S.M.A. Haseeb, Y. Hayashi, M. Masuda, and M. Arita: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 921–27.10.1007/s11663-002-0076-4 ↗
5. T. Müller, J. Grimwood, A. Bachmaier, and R. Pippan: Metals, 2018, vol. 8, pp. 363–75.10.3390/met8050363 ↗
6. J.O. Nielsen, P. Møller, and K. Pantleon: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 3785–93.10.1007/s11661-019-05311-z ↗
7. J.O. Nielsen and K. Pantleon: Surf. Eng., 2019. https://doi.org/10.1080/02670844.2019.1675305.10.1080/02670844.2019.1675305 ↗
8. M. Izaki, H. Enomoto, A. Nakae, S. Terada, Y. Eiko, and T. Omi: J. Surf. Fin. Soc. Jpn., 1994, vol. 45, pp. 1303–09.10.4139/sfj.45.1302 ↗
9. A.S.M.A. Haseeb, M. Arita, and Y. Hayashi: J. Mater. Sci., 2001, vol. 6, pp. 4739–43.10.1023/A:1017931106376 ↗
10. Schlesinger M, Paunovic M (2010) In: Izaki M (ed) Modern Electroplating, 5th edn. Wiley, Hoboken, pp 309–2610.1002/9780470602638 ↗
11. Y. Fujiwara, M. Izaki, H. Enomoto, and A. Nakae: Denki Kagaku, 1993, vol. 61, pp. 840–42.10.5796/electrochemistry.61.840 ↗
12. A.S.M.A. Haseeb and M.Z. Huq: Met. Finishing, 1997, vol. 95, pp. 30–34.10.1016/S0026-0576(97)86770-0 ↗
13. N. Fukumuro, S. Kojima, M. Fujino, Y. Mizuta, T. Maruo, S. Yae, and Y. Fukai: J. Alloys Compd., 2015, vol. 645, pp. 404–07.10.1016/j.jallcom.2014.12.093 ↗
14. Y. Fujiwara, M. Izaki, H. Enomoto, T. Nagayama, E. Yamauchi, and A. Nakae: J. Appl. Electrochem., 1998, vol. 28, pp. 855–62.10.1023/A:1003444610964 ↗
15. M. Izaki and T. Omi: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 483–86.10.1007/BF02648429 ↗
16. C. Genzel, I.A. Denks, J. Gibmeier, M. Klaus, and G. Wagener: Nucl. Instrum. Meth. Phys. Res. A, 2007, vol. 578, pp. 23–33.10.1016/j.nima.2007.05.209 ↗
17. E.J. Mittemeijer: J. Mater. Sci., 1992, vol. 27, pp. 3977–87.10.1007/BF01105093 ↗
18. W.Y. Choo and J.Y. Lee: Metall. Trans. A, 1982, vol. 13A, pp. 135–40.10.1007/BF02642424 ↗
19. L. Cheng, C.M. Brakman, B.M. Korevaar, and E.J. Mittemeijer: Metall. Trans. A, 1988, vol. 19A, pp. 2415–26.10.1007/BF02645469 ↗
20. Bhadeshia HKDH (2015) Bainite Steels Theory Practice, 3rd edn. Maney Publishing, Leeds, pp 61–86
21. H.L. Yakel: Int. Met. Rev., 1985, vol. 30, pp. 17–40.10.1179/imr.1985.30.1.17 ↗
22. U. Schwertmann and W.R. Fischer: Geoderma, 1973, vol. 10, pp. 237–47.10.1016/0016-7061(73)90066-9 ↗
23. E. Jansen, A. Kyek, W. Schäfer, and U. Schwertmann: Appl. Phys. A, 2002, vol. 74, pp. 1004–06.10.1007/s003390101175 ↗
24. S. Das, M.J. Hendry, and J. Essilfie-Dughan: Environ. Sci. Technol., 2010, vol. 45, pp. 268–75.10.1021/es101903y ↗
25. R.M. Cornell and U. Schewertmann: Iron Oxides: Structures, Properties, Reactions, Occurrences and Uses, 2nd ed., Wiley, Hoboken, NJ, 2003, pp. 433–68.10.1002/3527602097 ↗
26. M. Panunovic and M. Schlesinger: Fundamentals of Electrochemical Deposition, Wiley, Hoboken, NJ, 2006, pp. 139–68.10.1002/0470009403 ↗
27. A.S. Campbell, U. Schwertmann, and P.A. Campbell: Clay Miner., 1997, vol. 32, pp. 615–22.10.1180/claymin.1997.032.4.11 ↗
28. X. Yu, Z. Jiang, J. Zhao, D. Wei, and C. Zhou: Appl. Mech. Mater., 2013, vols. 395–396, pp. 273–78.10.4028/www.scientific.net/AMM.395-396.273 ↗