journal article·2020-09

Thermal–Mechanical Working of Spark Plasma Sintered Preforms Fabricated from Aluminum 2219 Powder

M. Y. Amegadzie, B. S. Amirkhiz, B. W. Williams, I. W. Donaldson, D. P. Bishop

Publisher page

Abstract

The effects of spark plasma sintering (SPS) coupled with hot upset forging of aluminum 2219 powder were studied. SPS was found to be an effective means of consolidating the powder as select specimens achieved full theoretical density. Although these as-sintered products also demonstrated a reasonable combination of tensile properties, they were greatly improved after forging. The most acute gains were observed in tensile ductility wherein three to four times improvements transpired. TEM analyses confirmed that forging manifested an appreciable disruption of the residual oxide networks present in the as-sintered product which was believed to be the primary driver of tensile property enhancements. SPS + forge products were also responsive to T87 heat treatment. Typical T87 values for tensile yield strength, UTS, and elongation to fracture were 350 MPa, 465 MPa, and 10 pct, respectively. Interestingly, these values were attainable over a wide range of sintering and forging temperatures. TEM analyses confirmed that θ′ was the dominant precipitate present in the SPS + forge-T87 products.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. J. Hirsch: Trans. Nonferrous Met. Soc. China, 2014, vol. 24, pp. 1995–2002.10.1016/S1003-6326(14)63305-7 ↗
2. J.-H. Schmitt and T. Lung: Comptes Rendus Phys., 2018, vol. 19, pp. 641–56.10.1016/j.crhy.2018.11.004 ↗
3. T.T.T. Trang, J.H. Zhang, J.H. Kim, A. Zargaran, J.H. Hwang, B.C. Suh, and N.J. Kim: Nat. Commun., 2018, vol. 9, pp. 1–6.10.1038/s41467-018-04981-4 ↗
4. F. Meng, J. Mckechnie, T. Turner, K.H. Wong, and S.J. Pickering: Environ. Sci. Technol., 2017, vol. 51, pp. 12727–36.10.1021/acs.est.7b04069 ↗
5. J. Capus: Met. Powder Rep., 2016, vol. 71, pp. 318–20.10.1016/j.mprp.2016.07.002 ↗
6. D. Magid: Int. J. Powder Metall., 2018, vol. 54, pp. 7–13.
7. H. Queudet, S. Lemonnier, E. Barraud, J. Ghanbaja, N. Allain, and E. Ga: 2017, vol. 685, pp. 71–8.
8. L.J.B. Smith, S.F. Corbin, R.L. Hexemer, I.W. Donaldson, and D.P. Bishop: Metall. Mater. Trans. A, 2013, vol. 45, pp. 980–9.
9. 9 W.W. Zhang, Y. Hu, Z. Wang, C. Yang, G.Q. Zhang, K.G. Prashanth, and C. Suryanarayana: Mater. Sci. Eng. A, 2018, vol. 734, pp. 34–41.10.1016/j.msea.2018.07.082 ↗
10. 10 Z. Cai, C. Zhang, R. Wang, C. Peng, K. Qiu, and Y. Feng: Mater. Des., 2015, vol. 87, pp. 996–1002.10.1016/j.matdes.2015.08.106 ↗
11. R.W. Cooke, R.L. Hexemer, I.W. Donaldson, and D.P. Bishop: J. Mater. Process., 2016, pp. 72–79.10.1016/j.jmatprotec.2015.11.011 ↗
12. 12 M.R. Rafi, F. Ahmad, N. Ikram, R. Ahmad, and A. Salam: J. Appl. Sci., 2011, vol. 11, pp. 1857–61.10.3923/jas.2011.1857.1861 ↗
13. 13 V. Malarvizhi, S Balasubramanian: Trans. Nonferrous Met. Soc. China, 2011, vol. 21, pp. 962–73.10.1016/S1003-6326(11)60808-X ↗
14. 14 V.A. Narasayya, P. Rambabu, M.K. Mohan, R. Mitra, and N.E. Prasad: Procedia Mater. Sci., 2014, vol. 6, pp. 322–30.10.1016/j.mspro.2014.07.041 ↗
15. 15 K.N. Manjunath and G.B. Krishnappa: Mater. Today Proc., 2018, vol. 5, pp. 3019–26.10.1016/j.matpr.2018.01.102 ↗
16. 16 R.N. Lumley, T.B. Sercombe, and B.B. Schaffer: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 457–63.10.1007/s11661-999-0335-y ↗
17. 17 G.A. Sweet, M. Brochu, R.L. Hexemer Jr., I.W. Donaldson, and D.P. Bishop: Mater. Sci. Eng. A, 2014, vol. 608, pp. 273–82.10.1016/j.msea.2014.04.078 ↗
18. 18 S. Devaraj, S. Sankaran, and R. Kumar: Acta Metall. Sin., 2013, vol. 26, pp. 761–71.10.1007/s40195-013-0159-z ↗
19. N. Saheb: Adv. Mater. Sci. Eng., 2014, pp. 1–9.
20. F. Saba, F. Zhang, S.A. Sajjadi, and M. Haddad-Sabzevar: in Spark Plasma Sintering of Materials, P. Cavaliere, ed., Springer, New York, 2019, pp. 119–59.10.1007/978-3-030-05327-7_5 ↗
21. 21 S.S. Deng, D.J. Wang, Q. Luo, Y.J. Huang, and J. Shen: Adv. Powder Technol., 2015, vol. 26, pp. 1696–701.10.1016/j.apt.2015.10.009 ↗
22. 22 S. Mula, K. Mondal, S. Ghosh, and S.K. Pabi: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3757–63.10.1016/j.msea.2010.03.068 ↗
23. 23 R.S. Maurya and T. Laha: Philos. Mag. Lett., 2016, vol. 96, pp. 313–21.10.1080/09500839.2016.1215606 ↗
24. 24 W.F. Smith: Structure and Properties of Engineering Alloys, 2 edition., McGraw-Hill Science/Engineering/Math, New York, 1993.
25. 25 R.K. Gupta, R. Panda, A.K. Mukhopadhyay, V.A. Kumar, P. Sankaravelayutham, and K.M. George: Met. Sci. Heat Treat., 2015, vol. 57, pp. 350–3.10.1007/s11041-015-9888-0 ↗
26. ASM Handbook. Volume 4. Heat Treating., 1991.
27. 27 Q. Wang, Z. Li, S. Pang, X. Li, C. Dong, and P.K. Liaw: Entropy, 2018, vol. 20, p. 878.10.3390/e20110878 ↗
28. 28 Y. Deng, Z. Yin, and J. Huang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1780–6.10.1016/j.msea.2010.11.016 ↗
29. 29 X. Huang, H. Zhang, Y. Han, W. Wu, and J. Chen: 2010, vol. 527, pp. 485–90.
30. E. Ghassemali, M.J. Tan, C.B. Wah, S.C.V. Lim, and A.E.W. Jarfors: in Friction effects during open-die micro-forging/extrusion processes: An upper bound approach, vol. 81, Procedia Engineering, 2014, pp. 1915–20.10.1016/j.proeng.2014.10.256 ↗
31. L. Liu, Y. Wu, and H. Gong: Materials (Basel)., https://doi.org/10.3390/ma11091496.10.3390/ma11091496 ↗
32. J. Kang, Z.C. Feng, G.S. Frankel, I.W. Huang, G.Q. Wang, and A.P. Wu: Metall. Mater. Trans. A 2016, vol. 47A, pp. 4553–65.10.1007/s11661-016-3648-7 ↗
33. 33 H. Wang, Y. Yi, and S. Huang: J. Alloys Compd., 2016, vol. 685, pp. 941–8.10.1016/j.jallcom.2016.06.111 ↗