Aging of an Al-Mg-Si Alloy with a Silicon Excess and Reinforced with Ceramic Particles
Source abstract
Abstract
The aging of an Al-Mg-Si alloy with a high silicon excess and reinforced with ceramic particles was characterized between 373 K and 623 K to understand how the particles affect: (i) the precipitation kinetics of coherent and semi-coherent phases, (ii) the precipitation sequence of the alloy, and (iii) the loss of mechanical strength from a peak-aged microstructure obtained by a T6 treatment. Compared with the unreinforced alloy, heterogeneous precipitation of disordered semi-coherent phases occurs on dislocations and the precipitation kinetics were found to be accelerated in the composite leading to an acceleration of the loss of strength from the T6 condition, due to the precipitation of the Type-C phase. An experimental isothermal transformation curve was proposed for the composite and compared with that of the unreinforced alloy. Then, a study was performed on a deformed alloy to demonstrate that most of the differences observed between the unreinforced alloy and the composite can be explained by the high dislocation density generated in the matrix of the composite due to the presence of ceramic particles. Lastly, the decrease in mechanical strength occurring during isothermal treatments from the T6 state could be successfully modeled using the JMAK approach.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. 1. G. Meyruey, V. Massardier, W. Lefebvre, and M. Perez: Mater. Sci. Eng. A, 2018, vol. 730, pp. 92- 105.10.1016/j.msea.2018.05.094 ↗
2. 2. K. Fukui, M. Takeda, and T. Endo:Nippon Kinzoku Gakkaishi/Journal Jpn. Inst. Met., 2006, vol. 70, pp. 715–719.10.2320/jinstmet.70.715 ↗
3. 3. A. K. Gupta, D. J. Lloyd, and S. A. Court: Mater. Sci. Eng., 2001, vol. 316, pp. 11–17.10.1016/S0921-5093(01)01247-3 ↗
4. 4. K. Matsuda, Y. Sakaguchi, Y. Miyata, Y. Uetani, T. Sato, A. Kamio, S. Ikeno:Mater. Sci., 2000, vol. 5, pp. 179–189.10.1023/A:1004769305736 ↗
5. K. Matsuda, S. Tada, S. Ikeno, T. Sato, and A. Kamio: Scripta Metall. Mater., 1995, vol. 32, pp. 1175–1180.10.1016/0956-716X(95)00121-B ↗
6. 6. K. Matsuda, S. Ikeno, T. Sato, and A. Kamio: Acta Metall., 1996, vol. 34, pp. 1797–1802.
7. 7. K. Matsuda, T. Naoi, K. Fujii, and Y. Uetani: Mater. Sci. Eng. A, 1999, vol. 262, pp. 232–237.10.1016/S0921-5093(98)00962-9 ↗
8. A. Froseth, S. Andersen, C. Marioara, P. Derlet, and R. Hoier: MRS Online Proceeding Libr. Arch., 2002.
9. A. Froseth, R. Hoier, P. Derlet, S. Andersen, and C. Marioara: Phys. Rev. B, 2003, vol. 67, pp. 1–11.10.1103/PhysRevB.67.224106 ↗
10. L. C. Doan, K. Nakai, Y. Matsuura, S. Kobayashi, and Y. Ohmori: Mater. Trans. 2002, vol. 43, pp. 1371–1380.10.2320/matertrans.43.1371 ↗
11. 11. C. Ravi and C. Wolverton: Acta Mater., 2004, vol. 52, pp. 4213–4227.10.1016/j.actamat.2004.05.037 ↗
12. E. Povoden-karadeniz, P. Lang, P. Warczok, A. Falahati, W. Jun, and E. Kozeschnik: Calphad, 2013, vol. 43, pp. 94–104.10.1016/j.calphad.2013.03.004 ↗
13. S. Mazumdar: Composites Manufacturing, 2016, pp. 1–6.
14. Lucintel: Report, Growth opportunities in Global Composites Industry,Lucintel, Texas (USA), pp. 1-25, March 2011.
15. L. Berreur, B. DeMaillard, and S. Nosperger: Report, Nodal Consultants, Paris, pp. 1-30, May 2002.
16. F. Humphreys, H. Lilholt, and O. Pederson:Proc. 9th Riso Int. Symp. Mech. Phys. Behav. Met. Ceram. Compos., 1988, pp. 51–74.
17. 17. S. Suresh and T. Christman: Scr. Metall., 1989, vol. 23, pp. 1599–1602.10.1016/0036-9748(89)90136-1 ↗
18. 18. R. J. Arsenault, L. Wang, and C. R. Feng:Acta Metall. Mater., 1991, vol. 39, pp. 47–57.10.1016/0956-7151(91)90327-W ↗
19. M. Vogelsang, R. J. Arsenault, and R. M. Fisher (1986) Metall. Trans. A, vol. 17, pp. 379–38910.1007/BF02643944 ↗
20. 20. Z. M. Sun, J. B. Li, Z. G. Wang, and W. J. Li: Acta Met. mater., 1992, vol. 40, pp. 2961–2966.10.1016/0956-7151(92)90460-V ↗
21. 21. M. Suery, C. Teodosiu, and L. F. Menezes: Mater. Sci. Eng., 1993, vol. 167, pp. 97–105.10.1016/0921-5093(93)90342-C ↗
22. 22. N. K. Sharma, R. K. Misra, and S. Sharma: Ceram. Int., 2017, vol. 43, pp. 513–522.10.1016/j.ceramint.2016.09.187 ↗
23. 23. N. Ramakrishnan: Acta Mater., 1996, vol. 44, pp. 69–77.10.1016/1359-6454(95)00150-9 ↗
24. 24. G. Meijer, F. Ellyin, and Z. Xia: Compos. Part B Eng., 2000, vol. 31, pp. 29–37.10.1016/S1359-8368(99)00060-8 ↗
25. 25. V. Massardier and P. Merle: Mater. Sci. Eng. A, 1998, vol. 249, pp. 109–120.10.1016/S0921-5093(98)00579-6 ↗
26. 26. D. Dafir, G. Guichon, R. Borrelly, S. Cardinal, P. F. Gobin, and P. Merle: Mater. Sci. Eng. A, 1991, vol. 144, pp. 311–318.10.1016/0921-5093(91)90238-I ↗
27. 27. P. Appendino, C. Badini, F. Marino, and A. Tomasi: Mater. Sci. Eng., 1991, vol. 135, pp. 275–279.10.1016/0921-5093(91)90575-8 ↗
28. 28. C. Badini, F. Marino, and A. Tomasi: Mater. Sci. Eng., 1991, vol. 136, pp. 99–107.10.1016/0921-5093(91)90445-S ↗
29. 29.N. E. Bekheet, R. M. Gadelrab, M. F. Salah, and A. N. A. El-azim: Mater. &Des., 2002, vol. 23, pp. 153–159.10.1016/S0261-3069(01)00072-3 ↗
30. J. M. Papazian (1988) Metall. Trans. A, vol. 19, no. 12, pp. 2945–2953.10.1007/BF02647721 ↗
31. 31. I. Dutta, S. M. Allen, and J. L. Hafley:Metall. Trans. A, 1991, vol. 22, pp. 2553–2563.10.1007/BF02851349 ↗
32. 32. S. Abis and G. Donzelli: J. Mater. Sci. Lett., 1988, vol. 7, pp. 51–52.10.1007/BF01729913 ↗
33. C. Friend and S. Luxton: J. Mater. Sci., 1988, vol. 23, pp. 3173–3180.10.1007/BF00551291 ↗
34. 34. T. G. Nieh and R. F. Karlak: Scr. Metall., 1984, vol. 18, pp. 25–28.10.1016/0036-9748(84)90083-8 ↗
35. 35. M. Hadianfard, Y. Mai, and J. Healy: J. Mater., 1993, vol. 28, pp. 3665–3669.10.1007/BF01159851 ↗
36. 36. M. Gupta and M. Surappa: Mater. Res. Bull., 1995, vol. 30, pp. 1023–1030.10.1016/0025-5408(95)00076-3 ↗
37. 37. L. Salvo, G. L’Esperance, M. Suery, and J. Legoux: Mater. Sci. Eng., 1994, vol. 177, pp. 173–183.10.1016/0921-5093(94)90489-8 ↗
38. 38. C. Badini, F. Marino, and A. Tomasi: Mater. Chem. Phys., 1990, vol. 25, pp. 57–70.10.1016/0254-0584(90)90007-W ↗
39. S. Reihani, D. Dafir, and P. Merle (1993) Scripta Metall. Mater., vol. 28, pp. 639–644.10.1016/0956-716X(93)90210-J ↗
40. D. Dafir: Ph.D. Thesis, INSA de Lyon, 1993.
41. L. Nordheim and C. J. Gorter: Physica, 1935, vol. 2, pp. 383–390.10.1016/S0031-8914(35)90101-X ↗
42. J. Blatt and F. J. Lucke (1967) Philos. Mag. vol. 15, pp. 649–657.10.1080/14786436708220913 ↗
43. J.E. Hatch: Aluminium: Properties and Physical Metallurgy. American Society for Metals, ASM International, 1984.
44. 44. G. M. Raynaud and P. Guyot: Acta Metall., 1988, vol. 36, pp. 143–147.10.1016/0001-6160(88)90034-X ↗
45. 45. J. M. Pelletier, G. Vigier, J. Merlin, P. Merle, F. Fouquet, and R. Borrelly: Acta Metall., 1984, vol. 32, pp. 1069–1078.10.1016/0001-6160(84)90010-5 ↗
46. J.M. Pelletier: Ph.D. Thesis, INSA de Lyon, 1980.
47. 47. J. Ahmed, A. J. Wilkinson, and S. G. Roberts: Philosophical Magazine Letters, 1997, vol. 76, pp. 237-245.10.1080/095008397178986 ↗
48. 48. M. A. Crimp: Microscopy Research and Technic, 2006, vol. 69, pp. 374–381.10.1002/jemt.20293 ↗
49. 49. A. J. Wilkinson and P. B. Hirsch: Micron, 1997, vol. 28, pp. 279-308.10.1016/S0968-4328(97)00032-2 ↗
50. D. M. Norfleet, D. M. Dimiduk, S. J. Polasik, M. D. Uchic, and M. J. Mills: Acta Mater., 2008, pp. 2-14.
51. U. Martin, U. Muhle, and H. Oettel: Prakt. Metallogr., 1995, vol. 32, pp. 467.10.1515/pm-1995-320903 ↗
52. H. Demers, N. Poirier-Demers, A. Real Couture, D. Joly, M. Guilmain, N. De Jonge, D. Drouin (2011) Scanning, vol. 33, pp. 135–46.10.1002/sca.20262 ↗
53. 53. S. Zaefferer, N.N. Elhami: Acta Mater., 2014, vol. 75, pp. 20–50.10.1016/j.actamat.2014.04.018 ↗
54. H. Hunsicker: Aluminium (vol. 1), ASM, Metal. Ohio, 1967.
55. 55. V. Fallah, B. Langelier, N. Ofori-opoku, and B. Raeisinia:Acta Mater., 2016, vol. 103, pp. 290–300.10.1016/j.actamat.2015.09.027 ↗
56. 56. A. Lutts: Acta Metall., 1961, vol. 9, pp. 577–586.10.1016/0001-6160(61)90161-4 ↗
57. 57. S. J. Andersen, H. W. Zandbergen, J. Jansen, C. TrÆholt, U. Tundal, and O. Reiso:Acta Mater., 1997, vol. 46, pp. 3283–3298.10.1016/S1359-6454(97)00493-X ↗
58. 58. J. Hoyt: Acta Metall., 1972, vol. 39, pp. 2091–2098.10.1016/0956-7151(91)90179-5 ↗
59. F.C. Larché (1979) Dislocations in Solids, vol.4. North-Holland, Amsterdam, pp. 135.
60. 60. M. Wintenbergers: Acta Metall., 1959, vol. 7, pp. 549–555.10.1016/0001-6160(59)90191-9 ↗
61. H.J. Rack: Adv. Mater. Manuf. Process., 1988, vol. 3, pp. 327-358.
62. 62. JF. Lynch, CG. Ruderer, WH. Duckworth:Engineering Properties of selected ceramic materials,Batelle Memorial Institute,The American Ceramic Society, Columbus (Ohio), 1966.
63. A. Geiger and M. Jackson: Adv. Mater. Process. 1989, vol. 7, pp. 23.
64. W. Lengauer (2003) Handbook of ceramic hard materials (Transition metal carbides, nitrides and carbonitrides), Wiley: New-York, pp. 202–203
65. 65. R. J. Arsenault and N. Shi: Mater. Sci. Eng., 1986, vol. 81, pp. 175–187.10.1016/0025-5416(86)90261-2 ↗
66. 66. A. Deschamps, F. Livet, and Y. Bréchet: Acta Mater., 1999, vol. 47, pp. 281–292.10.1016/S1359-6454(98)00293-6 ↗
67. 67.M. J. Starink and S. C. Wang:Acta Mater., 2003, vol. 51, pp. 5131–5150.10.1016/S1359-6454(03)00363-X ↗
68. 68. F. Humphreys: Acta Met. mater., 1977, vol. 25, pp. 1323–1344.10.1016/0001-6160(77)90109-2 ↗
69. 69.N. Hansen:Acta Met. mater., 1977, vol. 25, pp. 863–869.10.1016/0001-6160(77)90171-7 ↗
70. 70.K. Teichmann, C.D. Marioara, S.J. Andersen, K.O. Pedersen, S. Gulbrandsen-Dahl, M. Kolar, R. Holmestad and K. Marthinsen:Philos. Mag., 2011, vol. 91, pp. 3744–3754.10.1080/14786435.2011.593577 ↗
71. 71. R. S. Yassar, D. P. Field, and H. Weiland: Scr. Mater., 2005, vol. 53, pp. 299–303.10.1016/j.scriptamat.2005.04.013 ↗
72. K. Matsuda, S. Shimizu, H. Gamada, Y. Uetani, F. Shinagawa, and S. Ikeno: J. Soc. Mat. Sci., 1999, vol. 48, pp. 10–15.10.2472/jsms.48.10 ↗