journal article·2020-06

Influence of Graphene, SiCnp, and G/SiCnp Hybrid Fillers on the Strengthening Mechanisms of Al-Matrix

Mohamed Shokeir, Sandy El Moghazi, Ahmed F. Omara, Ahmed ElGhazaly, Mohamed M. Emara, Hanadi G. Salem

Publisher page

Abstract

AA2124 reinforced with graphene (G), silicon carbide nanoparticles (SiCnp), and graphene-coated SiCnp (GCSiCnp) were fabricated and characterized. GCSiCnp reinforcement was fabricated by ball milling, followed by mixing and milling the reinforcements with AA2124 powders. Consolidation was achieved by cold compaction and hot extrusion (HE). The powders’ morphology and structural evolution were characterized with XRD and SEM. Microhardness and tensile properties were also characterized. Increasing the fillers’ content beyond 5 wt pct deteriorated the composites’ mechanical properties due to the agglomeration of the fillers. Adding 5 wt pct GCSiCnp increased the hardness, specific strength, and modulus of the composite and decreased ductility. Furthermore, 5 wt pct SiCnp induced severe lattice strain by intra-granular dispersion strengthening. The GCSiCnp filler strengthened the Al-matrix via the strong interfacial bonding of the intercalated inter-granular lamination of the hybrid particles within the Al-matrix and the intra-granular dispersion strengthening associated with the individual SiCnp. Adding 5 wt pct G lowered the HE composite’s density and hardness significantly, while the sliding of G-intercalated layers coating the Al-grains facilitated plastic flow along the extrusion direction and enhanced the strength and ductility of the composite compared to that containing 5 wt pct GCSiCnp.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Goushegir S.M., Dos Santos J. F., and Amancio-Filho S. T. Mater. Des. 2014, 54, pp.196–20610.1016/j.matdes.2013.08.034 ↗
2. Kala H., Mer K. K. S., and Kumar S. Procedia Mater. Sci. 2014, 6. pp.1951–1960.10.1016/j.mspro.2014.07.229 ↗
3. Dinaharan I., Kalaiselvan K., and Murugan N. Compos. Commun. 2017, 3, pp.42–46.10.1016/j.coco.2017.02.001 ↗
4. Jayalakshmi S, Gupta M (2015) Metallic Amorphous Alloy Reinforcements in Light Metal Matrices Springer Briefs in Materials. Springer, New York
5. Liu, L. Ke Q., Liu F., Huang C., and Xing L. Mater. Des. 2013, 45. pp.343–348.10.1016/j.matdes.2012.08.036 ↗
6. Casati R. and Vedani M. Met., 2014, 4, pp.65–83.10.3390/met4010065 ↗
7. Li J. L., Xiong Y. C., Wang X. D., Yan S. J., Yang C., He W. W., Chen J. Z., Wang S. Q. Zhang X. Y.,and Dai S. L. Mater. Sci. Eng. A 2015, 626, pp.400–405.10.1016/j.msea.2014.12.102 ↗
8. Zhao X. J., Xiao L. R., Zhao Z. W., Guo L., Ru H. Q., Zhang N., and Chen D. L. Ceram. Int. 2014, 40, pp.14295–14303.10.1016/j.ceramint.2014.06.020 ↗
9. Fadavi Boostani A., Tahamtan S., Jiang Z. Y., Wei D., Yazdani S., Azari Khosroshahi R., Taherzadeh Mousavian R., Xu Zhang J., and Gong D. Compos. Part A Appl. Sci. Manuf. 2015, 68, pp.155–163.10.1016/j.compositesa.2014.10.010 ↗
10. Kollo L., Leparoux M., Bradbury C. R., Jäggi C., Carreño-Morelli E., and Rodríguez-Arbaizar M. J. Alloys Compd. 2010, 489, pp.394–400.10.1016/j.jallcom.2009.09.128 ↗
11. Bastwros M., Kim G.Y., Zhu C., Zhang K., Wang S., Tang X., and Wang X. W. Compos. Part B Eng. 2014, 60, pp.111–118.10.1016/j.compositesb.2013.12.043 ↗
12. Wang J., Li Z., Fan G., Pan H., Chen Z., and Zhang D. Scr. Mater. 2012, 66, pp.594–59710.1016/j.scriptamat.2012.01.012 ↗
13. Khadem H., Nategh S.A., and Yoozbashizadeh S. J. Alloys Compd. 2011, 509, pp.2221–2226.10.1016/j.jallcom.2010.10.188 ↗
14. Saheb N., Aliyu I. K., Hassan S. F., and Al-Aqeeli N. Mater. (Basel) 2014, 6, pp. 6748–6767.10.3390/ma7096748 ↗
15. Dorri Moghadam A., Omrani E., Menezes P. L., and Rohatgi P. K. Compos. Part B Eng. 2015, 77, pp. 402–420.10.1016/j.compositesb.2015.03.014 ↗
16. Carreño-Gallardo C., Estrada-Guel I., López-Meléndez C., and Martínez-Sánchez R. J. Alloys Compd. 2014, 586, pp. 68–72.10.1016/j.jallcom.2013.03.232 ↗
17. Wu Y. and Lvernia E. J. Scr. Met. Mater. 1992, 27, pp.173-178.10.1016/0956-716X(92)90108-Q ↗
18. Conlon K. T. and Wilkinson D. S. Mater. Sci. Eng. A 2001, 317, pp.108–114.10.1016/S0921-5093(01)01168-6 ↗
19. Huang Y., Su Y., Guo X., Guo Q., Ouyang Q., Zhang G. and Zhang D. J. Alloys Compd., 2017, 711, pp. 22–30.10.1016/j.jallcom.2017.03.233 ↗
20. El-Ghazaly A., Anis G., and Salem H. G. Composites Part A. 2017, 95, pp.325–336.10.1016/j.compositesa.2017.02.006 ↗
21. A. El Ghazaly, M. Shokeir, S.N. El Moghazi, A. Fathy, M.M. Emara, and H.G. Salem: in Proceeding of the 3rd Pan American Materials Congress 2017, pp. 115–23.
22. Salem H. G., El-Eskandarany S., and Kandil A., Abdul Fattah H. J. Nanomater. 2009, 2009, pp.1-12.10.1155/2009/479185 ↗
23. Mendoza-Duartea J. M., Guela E., Hernandezb F. C. R., Gallardoa C. C., Meléndezc C. L. and Sáncheza R. M. Mater. Res. 2016, 19, pp. 13-1910.1590/1980-5373-mr-2015-0625 ↗
24. V.D. Mote, Y. Purushotham, and B.N. Dol: J. Appl. Theor. Phys., 2012, 6, pp. 1–8.10.1186/2251-7235-6-1 ↗
25. Zhu H. and Qi F. Rare Met. 2011, 30, pp. 550-554.10.1007/s12598-011-0428-9 ↗
26. El Daly A. A., Abdel Hameed M., Hashish M. and Daoush W. M. Mater. Sci. Eng. A 2013, 559, pp.384-393.10.1016/j.msea.2012.08.114 ↗
27. Reddy A. P., Krishna P. V., Rao E. N., and Murthy N. V. Mater. Today Proceedings. 2017, 4, pp.359-397.
28. Deaquino-Lara R, Gutiérrez-Castañeda E, Estrada-Guel I, Hinojosa-Ruiz G, Garcia-Sánchez E, Herrera-Ranirez JM, Pérez-Bustamante R, Martínez-Sánchez R (2014) Mater Des 53:1104-111110.1016/j.matdes.2013.08.005 ↗
29. Fallahdoost H., Nouri A., and Azimi A. J. Phys. Chem. Solids 2016, 93, pp.137-144.10.1016/j.jpcs.2016.02.020 ↗
30. Mann S., Kumar R., and Jindal V. K. Journal of RSC Advances 2017, 36, pp.1-21.
31. Baradeswaran A. and Laya Perumal A. E. Composites Part B 2014, 56, pp.464-471.10.1016/j.compositesb.2013.08.013 ↗
32. Bhowmik A, Dey D, Biswas A (2020) Mater Today Proc. https://doi.org/10.1016/j.matpr.2020.02.43610.1016/j.matpr.2020.02.436 ↗
33. Ted Cuo M. L. and Tsao C. Y. A. Compos. Sci. and Technol. 2000, 60, pp.65-74.10.1016/S0266-3538(99)00106-2 ↗
34. Kaushik N. Ch. and Rao R. N. Tribol. Int. 2016, 96, pp.184-19010.1016/j.triboint.2015.12.045 ↗
35. Challapalli S (2001) Mechanical Alloying and Milling. CRC Press, New York
36. Reddy M. P., Shakoor R. A., Parande G., Manakari V., Ubaid F., Mohamed A., and Gupta M. Prog. Nat. Sci.: Mater. Int. 2017, 27, pp.606-614.10.1016/j.pnsc.2017.08.015 ↗
37. Cheng-jin HU, Hong-ge YAN, Ji-hua CHEN, and Bin SU. Trans. Nonferrous Met. Soc. China 2016, 26, pp.1259-1268.10.1016/S1003-6326(16)64226-7 ↗
38. Salem H. G. and Sadek A. A. J.Mater.Eng. perform. 2010, 19, pp.356-367.10.1007/s11665-009-9507-6 ↗
39. Eldesouky A, Johnsson M, Svengren H, Attallah MM, Salem HG (2014) J Alloys Compd. 609:215-22110.1016/j.jallcom.2014.04.136 ↗
40. J.L. Hernandez-Rivera, H. Medellín-Castilo, D.F. De Lange, and L.G. Mejía-Rodríguez: in ASME 2014 International Mechanical Engineering Congress and Exposition, 2014.
41. Sun Y, Zhang C, Liu B, Meng Q, Ma S, Dai W (2018) Metals 8:499-51110.3390/met8070499 ↗
42. Blanco Fernandez, J., Jimenez Macias, E., Saenz-Diez Muro, J. C., Caputi, L. S., Miriello, D., De Luca, R., & Carvajal Fals, H. D. Metals, 2018 8(2), pp. 113-126.10.3390/met8020113 ↗
43. Shao P, Yang W, Zhang Q, Meng Q, Tan X, Xiu Z, Qiao J, Yu Z, Wu G (2018) Composites A 109:151-16210.1016/j.compositesa.2018.03.009 ↗
44. Mohammad Islam, Yasir Khalid, Iftikhar Ahmad, Abdulhakim A. Almajid, Amine Achour, Theresa J. Dunn, Aftab Akram, and Saqib Anwar: Metal. and Mat Trans A 2018, 49, pp. 2963-2976.10.1007/s11661-018-4625-0 ↗