Critical Analysis of Threshold Stresses in the Creep Mechanisms of a Powder Metallurgy Magnesium Alloy AZ31
Source abstract
Abstract
In this work, tensile tests were conducted on two powder metallurgy materials based on the AZ31 magnesium alloy. The first material, named AZ31-PM, was processed using atomized powder, followed by isostatic cold compaction at 340 MPa, plus hot extrusion at 350 °C. The second material, named AZ31-PMCM, used metal powder that was cryomilled in liquid nitrogen environment and processed as for the AZ31-PM material. Creep mechanisms were analyzed in the range 300 °C to 400 °C based on the creep laws determined previously for ingot metallurgy AZ31. Two threshold stresses, one for grain boundary sliding and the other for slip creep, both independent of temperature, were introduced, providing a consistent description of creep for the different AZ31-based materials. The variations observed in threshold stresses in the AZ31-PM material were attributed to an inhomogeneous distribution of dispersoids and satisfactorily explained by a composite type model. This method of analyzing the data is compared with the traditional one in the literature, demonstrating that the dependence of the threshold stresses with the temperature, reported in those articles, could actually be derived from the method used rather than from a real physical effect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. B.L. Mordike and T. Erbert: Magnesium: Properties - applications - potential. Mater. Sci. Eng. A, 2001, vol. 302, pp. 37-45.10.1016/S0921-5093(00)01351-4 ↗
2. I.J. Polmear: Light Alloys, 3rd ed., Arnold, London, 1995.
3. Magnesium and Magnesium Alloys, M.M. Avedesian, H. Baker, eds., ASM International, 1999.
4. I.A. Anyanwu, S. Kamado, and Y. Kojima: Mater. Trans., 2001, vol. 42, pp. 1206-11.10.2320/matertrans.42.1206 ↗
5. T. Mohri, M. Mabuchi, N. Saito, and M. Nakamura: Mater. Sci. Eng. A, 1998, vol. 257, pp. 287-94.10.1016/S0921-5093(98)00853-3 ↗
6. K. Yu, W. Li, J. Zhao, Z. Ma, and R. Wang: Scripta Mater., 2003, vol. 48, pp. 1319-23.10.1016/S1359-6462(03)00046-0 ↗
7. K. Amiya, T. Ohsuna, and A. Inoue: Mater. Trans., 2003, vol.44, pp. 2151-56.10.2320/matertrans.44.2151 ↗
8. J. Rao, K. Inoue, and Y. Kawamura: Adv. Eng. Mater., 2005, vol. 7, pp. 507-12.10.1002/adem.200400204 ↗
9. M. Yamasaki, T.Anan, S. Yoshimoto, and Y. Kawamura: Scripta Mater., 2005, vol. 53, pp. 799-803.10.1016/j.scriptamat.2005.06.006 ↗
10. Q. Li, Q. Wang, H. Zhou, X. Zeng, Y. Zhang, and W. Ding: Mater. Lett., 2005, vol. 59, pp. 2549-2554.10.1016/j.matlet.2005.03.044 ↗
11. H. Watanabe, T. Mukai, M. Mabuchi, and K. Higashi: Acta Mater., 2001, vol. 49, pp. 2027-37.10.1016/S1359-6454(01)00101-X ↗
12. H. Watanabe, T. Mukai, K. Ishikawa, T. Mohri, M. Mabuchi, and K. Higashi: Mater. Trans., 2001, vol. 42, pp. 157-62.10.2320/matertrans.42.157 ↗
13. H. Watanabe, T. Mukai, K. Ishikawa, M. Mabuchi, and K. Higashi: Mater. Sci. Eng. A, 2001, vol. 307, pp. 119-28.10.1016/S0921-5093(00)01974-2 ↗
14. T.G. Nieh, A.J. Schwartz, and J. Wadsworth: Mater. Sci. Eng. A, 1996, vol. 208, pp. 30-36.10.1016/0921-5093(95)10060-1 ↗
15. M. Mabuchi and K. Higashi: Philos. Mag. A, 1996, vol. 74, pp. 887-905.10.1080/01418619608242166 ↗
16. J.A. del Valle, M.T. Pérez-Prado, and O.A. Ruano: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1427-38.10.1007/s11661-005-0235-8 ↗
17. H. Watanabe, T. Mukai, and K. Higashi: Metall. Mater Trans. A, 2008, vol. 39, pp. 2351-62.10.1007/s11661-008-9596-0 ↗
18. A. Ball and M. M. Hutchison: Metal Sci. J., 1969, vol. 3, pp. 1-7.10.1179/msc.1969.3.1.1 ↗
19. E. Arzt and D. S Wilkinson: Acta Metall., 1986, vol. 34, pp. 1893-96.10.1016/0001-6160(86)90247-6 ↗
20. E. Arzt and J. Rösler: Acta Metall., 1988, vol. 36, pp. 1053-60.10.1016/0001-6160(88)90159-9 ↗
21. S. Spigarelli, O.A.Ruano, M. El Mehtedi, and J.A. del Valle: Mater. Sci. Eng. A, 2013, vol. 570, pp. 135-48.10.1016/j.msea.2013.01.060 ↗
22. J.A. del Valle and O.A. Ruano: Mater. Sci. Eng. A, 2008, vol. 487, pp. 473-80.10.1016/j.msea.2007.11.024 ↗
23. J.A. del Valle and O. A. Ruano: Acta Mater., 2007, vol. 55, pp. 455-66.10.1016/j.actamat.2006.08.039 ↗
24. J.A. del Valle, F. Peñalba, and O.A. Ruano: Mater. Sci. Eng. A, 2007, vol. 467, pp. 165-71.10.1016/j.msea.2007.02.088 ↗
25. Q.F. Wang, X.P. Xiao, J. Hu, W.W. Xu, X.Q. Zhao, and S.J. Zhao: in Proc. Sino-Swedish Structural Materials Symposium, 2007, pp. 167–72.10.1016/S1006-706X(08)60073-4 ↗
26. H.K. Lin and J.C. Huang: Mater. Trans., 2002, vol. 43, pp. 2424-32.10.2320/matertrans.43.2424 ↗
27. M. Mabuchi, Y. Chino, and H. Iwasaki: Mater. Trans., 2003, vol. 44, pp. 490-95.10.2320/matertrans.44.490 ↗
28. D.L. Yin, K.F. Zhang, G.F. Wang, and W.B. Han: Mater. Lett., 2005, vol. 59, pp. 1714-18.10.1016/j.matlet.2005.01.053 ↗
29. H. Watanabe, T. Mukai, K. Ishikawa, Y. Okanda, M. Kohzu, and K. Higashi: J. Jpn. Inst. Light Met., 1999, vol. 49, pp. 401-04.10.2464/jilm.49.401 ↗
30. H. Somekawa, H.Watanabe, T. Mukai, and K. Higashi: Scripta Mater., 2003, vol. 48, pp. 1249-54.10.1016/S1359-6462(03)00054-X ↗
31. H. Somekawa, H. Watanabe, and K. Higashi: Mater. Trans., 2003, vol. 44, pp. 496-503.10.2320/matertrans.44.496 ↗
32. H. Takuda, T. Morishita, T. Kinoshita, and N. Shirakawa: J. Mater. Process. Technnol., 2005, vol. 164–165, pp. 1258-62.10.1016/j.jmatprotec.2005.02.034 ↗
33. W.J. Kim, S.W. Chung, C.S. Chung, and D. Kum: Acta Mater., 2001, vol. 49, pp. 3337-45.10.1016/S1359-6454(01)00008-8 ↗
34. F.K. Abu-Farha and M.K. Khraisheh: Adv. Eng. Mater., 2007. vol. 9, pp. 777-83.10.1002/adem.200700155 ↗
35. W.J. Kim, J.D. Park, and U.S. Yoon: J. Alloys Compd., 2008, vol. 464, pp. 197-204.10.1016/j.jallcom.2007.10.067 ↗
36. M. Liu, G. Yuan, Q. Wang, Y. Wei, W. Ding, and Y. Zhu: Mater. Trans., 2002, vol. 43, pp. 1-4.10.2320/matertrans.43.1 ↗
37. H. Watanabe, H. Tsutsui, T. Mukai, M. Kohzu, S. Tanabe, and K. Higashi: Int. J. Plasticity, 2001, vol. 17, pp. 387-97.10.1016/S0749-6419(00)00042-5 ↗
38. X. Wu and Y. Liu: Scripta Mater., 2002, vol. 46, pp. 269-74.10.1016/S1359-6462(01)01234-9 ↗
39. N. Dua, A.F. Bower, P.E. Krajewski, and E. M. Taleff: Mater Sci. Eng. A, 2008, vol. 494, pp. 86-91.10.1016/j.msea.2007.10.089 ↗
40. A.Yawny and G. Eggeler: Mater. Sci. Eng. A, 2004, vol. 387-389, pp. 905-909.10.1016/j.msea.2003.12.083 ↗
41. L.M. Brown and R.K. Ham: in Strengthening Methods in Crystals, A. Kelly, R. B. Nicholson, eds., Elsevier, Amsterdam, 1971.
42. R. S. W. Shewfelt and L. M. Brown: Phil. Mag., 1977, vol. 35, pp. 945-62.10.1080/14786437708232636 ↗
43. J. Rösler and E. Arzt: Acta Metall., 1988, vol. 36, pp. 1043-51.10.1016/0001-6160(88)90158-7 ↗
44. A.K. Ghosh and R. Raj: Acta Metall., 1981, vol. 29, pp. 607-16.10.1016/0001-6160(81)90142-5 ↗
45. J.A. del Valle and O. A. Ruano: Mater. Lett., 2008, vol. 62, pp. 3391-94.10.1016/j.matlet.2008.03.023 ↗