Testing Model Structure Through a Unification of Some Modern Parametric Models of Creep: An Application to 316H Stainless Steel
Source abstract
Abstract
Abstract It is important to be able to predict the creep life of materials used in power plants and in aeroengines. This paper develops a new parametric creep model that extends those put forward by Wilshire and Yang et al. by having them as restricted or special cases of a new generalized model. When this generalized model was applied to failure time data on 316H stainless steel it was found that neither of these established parametric models explained the greatest variation in the experimentally obtained times to failure. Instead, a version of this generalized model was most compatible with the experimental data. It was further found that the activation energy for this material changed at a normalized stress of 0.41 due to a change from the domination of dislocation movement within grains to movement within grain boundaries. Finally, when the generalized model was used to predict failure times beyond 5000 hours (using only the shorter test times), the new generalized model had better predictive capability at most temperatures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. ASME Boiler and Pressure Vessel Committee on Materials: Boiler and Pressure Vessel Code, section II-materials, ASME, New York, 2004.
2. D. Allen and S. Garwood: Energy Materials-Strategic Research Agenda, 2007. Available online: http://www.matuk.co.uk/docs/1_StrategicResearchAgenda%20FINAL.pdf. Accessed 28 May 2019.
3. B. Wilshire and A.J. Battenbough: Materials Science and Engineering A, 2007, 443, pp. 156-166.10.1016/j.msea.2006.08.094 ↗
4. M. Yang, Q. Wang, X.L Song, J. Jia, and Z.D. Xiang: Metallurgical and Materials Transactions A, 2016, 48(7), pp. 3479-3487.
5. H. Eyring: Basic Chemical Kinetics, Wiley, New York, 1980.
6. F.C. Monkman and N.J. Grant: Proc. Am. Soc. Test. Mater., 1956, vol. 56, pp. 593.
7. I.I. Trunin, N.G. Golobova and E.A. Loginov: In: Proc. 4th Int. Symp. On Heat-Resistant Metallic Materials, Mala Fatravol, 1971, vol. 168, CSSR.
8. F. R. Larson and J. A. Miller: Trans ASME, 1952, 74, pp. 765-775.
9. L. R. Orr, O. D. Sherby and J. E. Dorn: Trans ASME, 1954, 46, 113.
10. S. S. Manson and U. Muraldihan: EPRI CS-3171, Research project 638-1, 1983
11. S. S. Manson and A. M. Haferd: NACA TN 2890, 1953.
12. S. S. Manson and W. F. Brown: Proc ASTM, 1953, 53, pp. 683-719.
13. B. Wilshire and P. J. Scharning:: Materials Science and Technology, 2008, 24(1), pp. 1-9.10.1179/174328407X245779 ↗
14. B. Wilshire, and M. Whittaker:Materials Science and Technology, 2011, 27(3), pp. 642-647.10.1179/026708310X520529 ↗
15. M. Evans: Applied Mathematical Modelling, 2016, 40(23-24), pp. 10342-10359.10.1016/j.apm.2016.07.013 ↗
16. M. T. Whittaker, W. Harrison, C. Den, C. Rae and S. Williams: Materials, 2017, 10(1), pp. 61.10.3390/ma10010061 ↗
17. Creep datasheets in MatNavi database (National Institute of Materials Science of Japan). www.nims.go.jp/matnavi. Accessed May 2019.
18. NIMS Creep Data Sheet No.14B: Data Sheets on the Elevated-Temperature Properties of 18Cr-12Ni-Mo Stainless Steel Plates for Reactor Vessels (SUS 316HP), 2nd ed, National Research Institute for Metals, Tokyo, Japan, 1988.
19. 19. M. T. Whittaker, M. Evans and B. Wilshire: Materials Science and Engineering: A, 2012, 552, pp. 145-150.10.1016/j.msea.2012.05.023 ↗
20. 20. H. Theil: Applied Economic Forecasts. North Holland, Amsterdam, 1966.