journal article·2019-11

Mechanical Properties of White Etching Areas in Carburized Bearing Steel Using Spherical Nanoindentation

Jonathan F. W. Leung, Vikram Bedekar, Rohit Voothaluru, Richard W. Neu

Publisher page

Abstract

The indentation stress–strain curves of nanocrystalline white etching areas (WEAs) in fatigue-damaged bearing steels were measured through the Pathak–Kalidindi spherical indentation protocols. Although the hardness of WEAs has been reported as greater than the matrix, the indentation yield strength is 36 ± 6 pct smaller and the Young’s modulus is 34 ± 11 pct smaller than the matrix. Using a Voigt–Reuss–Hill approximation, the measured reduction in Young’s modulus is consistent with the effective modulus of nanocrystalline grains within the WEAs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. S. Sheng: Report No. NREL/PR-5000-63868, National Renewable Energy Laboratory, Golden, CO, 2015.
2. A.A. Walvekar and F. Sadeghi: Int. J. Fatigue, 2017, vol. 95, pp. 264–81.10.1016/j.ijfatigue.2016.11.003 ↗
3. W. Holweger, M. Wolf, D. Merk, T. Blass, M. Goss, J. Loos, S. Barteldes, and A. Jakovics: Tribol. Trans., 2015, vol. 58, pp. 59–69.10.1080/10402004.2014.942938 ↗
4. W. Solano-Alvarez and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4907–15.10.1007/s11661-014-2430-y ↗
5. K. Hiraoka, M. Nagao, and T. Isomoto: J. ASTM Int., 2006, vol. 3, pp. 1–7.10.1520/JAI14059 ↗
6. A. Grabulov, R. Petrov, and H.W. Zandbergen: Int. J. Fatigue, 2010, vol. 32, pp. 576–83.10.1016/j.ijfatigue.2009.07.002 ↗
7. S.B. Hosseini, U. Klement, Y. Yao, and K. Ryttberg: Acta Mater., 2015, vol. 89, pp. 258–67.10.1016/j.actamat.2015.01.075 ↗
8. P.C. Becker: Met. Technol., 1981, vol. 8, pp. 234–43.10.1179/030716981803275415 ↗
9. H. Harada, T. Mikami, M. Shibata, D. Sokai, A. Yamamoto, and H. Tsubakino: ISIJ Int., 2005, vol. 45, pp. 1897–902.10.2355/isijinternational.45.1897 ↗
10. H.K. Danielsen, F.G. Guzmán, K. V. Dahl, Y.J. Li, J. Wu, G. Jacobs, G. Burghardt, S. Fæster, H. Alimadadi, S. Goto, D. Raabe, and R. Petrov: Wear, 2017, vol. 370–371, pp. 73–82.10.1016/j.wear.2016.11.016 ↗
11. Y.J. Li, M. Herbig, S. Goto, and D. Raabe: Mater. Sci. Technol., 2016, vol. 32, pp. 1100–5.10.1080/02670836.2015.1120458 ↗
12. 12 Y.J. Li, M. Herbig, S. Goto, and D. Raabe: Mater. Charact., 2017, vol. 123, pp. 349–53.10.1016/j.matchar.2016.12.002 ↗
13. 13 H.A. Al-Tameemi, H. Long, and R.S. Dwyer-Joyce: Wear, 2018, vol. 406–407, pp. 22–32.10.1016/j.wear.2018.03.008 ↗
14. Manieri F, Stadler K, Morales-Espejel GE, Kadiric A: Int. J. Fatigue, 2019, vol. 120, pp. 107–33.10.1016/j.ijfatigue.2018.10.023 ↗
15. 15 M.H. Evans: Mater. Sci. Technol., 2016, vol. 32, pp. 1133–69.10.1080/02670836.2015.1133022 ↗
16. 16 T. Bruce, E. Rounding, H. Long, and R.S. Dwyer-Joyce: Wear, 2015, vol. 338–339, pp. 164–77.10.1016/j.wear.2015.06.008 ↗
17. 17 M.H. Evans, J.C. Walker, C. Ma, L. Wang, and R.J.K. Wood: J. Mater. Sci. Eng. A, 2013, vol. 570, pp. 127–34.10.1016/j.msea.2013.02.004 ↗
18. 18 Y. Murakami and S. Matsuoka: Eng. Fract. Mech., 2010, vol. 77, pp. 1926–40.10.1016/j.engfracmech.2010.04.012 ↗
19. 19 Y. Murakami, N.N. Yokoyama, and J. Nagata: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 735–46.10.1046/j.1460-2695.2002.00576.x ↗
20. 20 Y. Murakami, T. Nomoto, T. Ueda, and Y. Murakami: Fatigue Fract. Eng. Mater. Struct., 2000, vol. 23, pp. 903–10.10.1046/j.1460-2695.2000.00343.x ↗
21. 21 V. Šmeļova, A. Schwedt, L. Wang, W. Holweger, and J. Mayer: Int. J. Fatigue, 2017, vol. 100, pp. 148–58.10.1016/j.ijfatigue.2017.03.027 ↗
22. 22 V. Šmeļova, A. Schwedt, L. Wang, W. Holweger, and J. Mayer: Int. J. Fatigue, 2017, vol. 98, pp. 142–54.10.1016/j.ijfatigue.2017.01.035 ↗
23. 23 J. Lai and K. Stadler: Wear, 2016, vol. 364–365, pp. 244–56.10.1016/j.wear.2016.08.001 ↗
24. Y. Kadin and M.Y. Sherif: Int. J. Fatigue, 2017, vol. 96, pp. 114–26.10.1016/j.ijfatigue.2016.11.006 ↗
25. S.X. Li, Y.S. Su, X.D. Shu, and J.J. Chen: Wear, 2017, vol. 380–381, pp. 146–53.10.1016/j.wear.2017.03.018 ↗
26. S. Pathak, S.R. Kalidindi, C. Klemenz, and N. Orlovskaya: J. Eur. Ceram. Soc., 2008, vol. 28, pp. 2213–20.10.1016/j.jeurceramsoc.2008.02.009 ↗
27. 27 S.R. Kalidindi and S. Pathak: Acta Mater., 2008, vol. 56, pp. 3523–32.10.1016/j.actamat.2008.03.036 ↗
28. S. Pathak, S.R. Kalidindi (2015) Mater. Sci. Eng. R 91, pp. 1–36.10.1016/j.mser.2015.02.001 ↗
29. 29 E.G. Herbert, G.M. Pharr, W.C. Oliver, B.N. Lucas, and J.L. Hay: Thin Solid Films, 2001, vol. 399, pp. 331–5.10.1016/S0040-6090(01)01439-0 ↗
30. 30 G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
31. 31 W.C. Oliver and G.M. Pharr: J. Mater. Res., 2004, vol. 19, pp. 3–20.10.1557/jmr.2004.19.1.3 ↗
32. 32 B.J. Briscoe, K.S. Sebastian, and M.J. Adams: J. Phys. D: Appl. Phys., 1994, vol. 27, pp. 1156–62.10.1088/0022-3727/27/6/013 ↗
33. 33 S. Pathak, D. Stojakovic, R. Doherty, and S.R. Kalidindi: J. Mater. Res., 2009, vol. 24, pp. 1142–55.10.1557/jmr.2009.0137 ↗
34. 34 D. Klötzer, C. Ullner, E. Tyulyukovskiy, and N. Huber: J. Mater. Res., 2006, vol. 21, pp. 677–84.10.1557/jmr.2006.0077 ↗
35. 35 S.J. Vachhani, R.D. Doherty, and S.R. Kalidindi: Acta Mater., 2013, vol. 61, pp. 3744–51.10.1016/j.actamat.2013.03.005 ↗
36. J. Thomas and T. Gemming: Analytical Transmission Electron Microscopy. Springer, Berlin, 2014.10.1007/978-94-017-8601-0 ↗
37. 37 A. Greco, S. Sheng, J. Keller, and A. Erdemir: Wear, 2013, vol. 302, pp. 1583–91.10.1016/j.wear.2013.01.060 ↗
38. 38 J. Lai and K. Stadler: Wear, 2016, vol. 364–365, pp. 244–56.10.1016/j.wear.2016.08.001 ↗
39. 39 R. Errichello, R. Budny, and R. Eckert: Tribol. Trans., 2013, vol. 56, pp. 1069–76.10.1080/10402004.2013.823531 ↗
40. 40 J.R. Davis: Carbon and Alloy Steels, ASM International, Materials Park, OH, 1996.
41. 41 S. Pathak, D. Stojakovic, and S.R. Kalidindi: Acta Mater., 2009, vol. 57, pp. 3020–8.10.1016/j.actamat.2009.03.008 ↗
42. E.N. Hahn, M.A. Meyers (2015) Mater. Sci. Eng. A 646, pp. 101–34.10.1016/j.msea.2015.07.075 ↗
43. 43 T.R. Malow and C.C. Koch: Metall. Mater. Trans. A, 1998, vol. 29, pp. 2285–95.10.1007/s11661-998-0106-1 ↗
44. 44 T.R. Malow, C.C. Koch, P.Q. Miraglia, and K.L. Murty: Metall. Mater. Trans. A, 1998, vol. 252, pp. 36–43.
45. 45 K. Lu, L. Lu, and S. Suresh: Science, 2009, vol. 349, pp. 349–53.10.1126/science.1159610 ↗
46. Y. Tang, E.M. Bringa, M.A. Meyers (2013) Mater. Sci. Eng. A 580, pp. 414–26.10.1016/j.msea.2013.05.024 ↗
47. 47 J.B. Jeon, B.J. Lee, and Y.W. Chang: Scr. Mater., 2011, vol. 64, pp. 494–7.10.1016/j.scriptamat.2010.11.019 ↗
48. 48 H. Van Swygenhoven and P.M. Derlet: Phys. Rev. B: Condens. Matter Mater. Phys., 2001, vol. 64, pp. 1–9.10.1103/PhysRevB.64.224105 ↗
49. 49 D. Jia, K.T. Ramesh, and E. Ma: Acta Mater., 2003, vol. 51, pp. 3495–509.10.1016/S1359-6454(03)00169-1 ↗
50. 50 K.J. Hemker: Science, 2004, vol. 304, pp. 221–3.10.1126/science.1097058 ↗
51. 51 H. Van Swygenhoven and J.R. Weertman: Mater. Today, 2006, vol. 9, pp. 24–31.10.1016/S1369-7021(06)71494-8 ↗
52. 52 V. Richter and M. V. Ruthendorf: Int. J. Refract. Met. Hard Mater., 1999, vol. 17, pp. 141–52.10.1016/S0263-4368(99)00003-7 ↗
53. 53 X. Liu, F. Yuan, and Y. Wei: Appl. Surf. Sci., 2013, vol. 279, pp. 159–66.10.1016/j.apsusc.2013.04.062 ↗
54. 54 L. Tian: Int. J. Metall. Met. Phys., 2017, vol. 2, pp. 1–13.10.35840/2631-5076/9208 ↗
55. 55 H. Li, H. Choo, Y. Ren, T.A. Saleh, U. Lienert, P.K. Liaw, and F. Ebrahimi: Phys. Rev. Lett., 2008, vol. 101, pp. 1–4.
56. 56 M.A. Meyers, A. Mishra, and D.J. Benson: Prog. Mater. Sci., 2006, vol. 51, pp. 427–556.10.1016/j.pmatsci.2005.08.003 ↗
57. 57 T.D. Shen, C.C. Koch, T.Y. Tsui, and G.M. Pharr: J. Mater. Res., 1995, vol. 10, pp. 2892–6.10.1557/JMR.1995.2892 ↗
58. 58 G.W. Nieman, J.R.. Weertman, and R.W. Siegel: Nanostruct. Mater., 1992, vol. 1, pp. 185–90.10.1016/0965-9773(92)90074-8 ↗
59. 59 A. Latapie and D. Farkas: Scr. Mater., 2003, vol. 48, pp. 611–5.10.1016/S1359-6462(02)00467-0 ↗
60. 60 E. Bonetti, G. Scipione, G. Valdre, S. Enzo, R. Frattini, and P.P. Macri: J. Mater. Sci., 1995, vol. 30, pp. 2220–6.10.1007/BF01184564 ↗
61. 61 G. Palumbo, S.J. Thorpe, and K.T. Aust: Scr. Metall. Mater., 1990, vol. 24, pp. 1347–50.10.1016/0956-716X(90)90354-J ↗
62. 62 X. Qing and G. Xingming: Int. J. Solids Struct., 2006, vol. 43, pp. 7793–9.10.1016/j.ijsolstr.2006.04.015 ↗
63. 63 P. Sharma and S. Ganti: J. Mater. Res., 2003, vol. 18, pp. 1823–6.10.1557/JMR.2003.0253 ↗
64. 64 S. Romankov, Y.C. Park, I. V. Shchetinin, and J.M. Yoon: Acta Mater., 2013, vol. 61, pp. 1254–65.10.1016/j.actamat.2012.11.001 ↗