Flow Stress Evolution in Further Straining of Severely Deformed Al
Source abstract
Abstract
To investigate the flow stress evolution in further straining of severely deformed Al sheets, a comprehensive model which considers both mechanical and metallurgical alterations is needed. In this study, constrained groove pressing (CGP) as a severe plastic deformation method, and a flat rolling process for further straining are utilized. Using basic mechanical models, strain and strain rate were calculated for this process. Dislocation density and flow stress evolutions were predicted by utilizing initial mechanical data, considering the ETMB (Y. Estrin, L. S. Toth, A. Molinari, and Y. Brechet) dislocation density model. Based on these model predictions, the combination of the CGP process with a further rolling process results in higher flow stresses than repeating the specific process discretely. This phenomenon can be attributed to the ability of the rolling process to produce a greater strain rate, which, in turn, leads to the higher flow stresses. Thorough data from the mechanical tests as well as X-ray diffraction profiles strongly support the validity of the model in the prediction of flow stress and dislocation density, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. A. Azushima, R. Kopp, A. Korhonen, D. Y. Yang, F. Micari, G. D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji and A. Rosochowski: CIRP Annals-Manuf. Technol., 2008, Vol. 57, pp. 716-735.10.1016/j.cirp.2008.09.005 ↗
2. I. Sabirov, M. Y. Murashkin and R. Z. Valiev: Mater. Sci. Eng. A, 2013, Vol. 560, pp. 1-24.10.1016/j.msea.2012.09.020 ↗
3. A. Dodangeh, M. Kazeminezhad and H. Aashuri: Mater. Sci. Eng. A, 2012, Vol. 558, pp. 371-376.10.1016/j.msea.2012.08.014 ↗
4. V. M. Segal: Mater. Sci. Eng. A, 1999, Vol. 271, pp. 322-333.10.1016/S0921-5093(99)00248-8 ↗
5. R. Z. Valiev, Langdon T G,, Prog. Mater. Sci., 2006, Vol. 51, pp. 881-981.10.1016/j.pmatsci.2006.02.003 ↗
6. N. Tsuji, T. Toyoda, Y. Minamino, Y. Koizumi, T. Yamane, M. Komatsu, and M. Kiritani: Mater. Sci. Eng. A, 2003, Vol. 350, pp. 108-116.10.1016/S0921-5093(02)00709-8 ↗
7. J. Jiang, Y. Ding, F. Zuo and A. Shan: Scripta Mater., 2009, Vol. 60, pp. 905-908.10.1016/j.scriptamat.2009.02.016 ↗
8. V. Charkhesht, and M. Kazeminezhad: J. Mater. Eng. Perform., 2017, Vol. 26, pp. 1311–24.10.1007/s11665-017-2504-2 ↗
9. E. A. El-Danaf: Mater. Design, 2012, Vol. 34, pp. 793-807.10.1016/j.matdes.2011.07.006 ↗
10. N. D. Stepanov, A. V. Kuznetsov, G. A. Salishchev, G. I. Raab and R. Z. Valiev: Mater. Sci. Eng. A, 2012, Vol. 554, pp. 105-115.10.1016/j.msea.2012.06.022 ↗
11. S. Li, AA. Gazder, IJ. Beyerlein, CH. Davies, EV. Pereloma: Acta Mater., 2007, Vol. 55, pp. 1017-1032.10.1016/j.actamat.2006.09.022 ↗
12. Y. Estrin, L. S. Toth, A. Molinari and Y. Brechet: Acta Mater., 1998, Vol. 46, pp. 5509-5522.10.1016/S1359-6454(98)00196-7 ↗
13. M. Goerdeler and G. Gottstein: Mater. Sci. Eng. A, 2001, Vol. 309, pp. 377-381.10.1016/S0921-5093(00)01728-7 ↗
14. B. Mülders, M. Zehetbauer, G. Gottstein, P. Les, and E. Schafler, Mater. Sci. Eng. A, 2002, Vol. 324, pp. 244–250.10.1016/S0921-5093(01)01319-3 ↗
15. G. V. S. S. Prasad, M. Goerdeler and G. Gottstein: Mater. Sci. Eng. A, 2005, Vol. 400, pp. 231-233.10.1016/j.msea.2005.03.061 ↗
16. F. Roters, D. Raabe and G. Gottstein: Acta Mater., 2000, Vol. 48, pp. 4181-4189.10.1016/S1359-6454(00)00289-5 ↗
17. A. Ma and F. Roters: Acta Mater., 2004, Vol. 52, pp. 3603-3612.10.1016/j.actamat.2004.04.012 ↗
18. L. S. Tóth, A. Molinari and Y. Estrin: J. Eng. Mater. Technol., 2002, Vol. 124, pp. 71.10.1115/1.1421350 ↗
19. E. Hosseini and M. Kazeminezhad,, Int. J. Refract. Met. H., 2009, Vol. 27, pp. 605-610.10.1016/j.ijrmhm.2008.09.006 ↗
20. E. Hosseini and M. Kazeminezhad: Comp. Mater. Sci., 2011, Vol. 50, pp. 1123-1135.10.1016/j.commatsci.2010.11.012 ↗
21. E. Hosseini, M. Kazeminezhad, A. Mani and E. Rafizadeh, Comp. Mater. Sci., 2009, Vol. 45, pp. 855-859.10.1016/j.commatsci.2008.12.004 ↗
22. E. Hosseini and M. Kazeminezhad: Comp. Mater. Sci., 2009, Vol. 46, pp. 902-905.10.1016/j.commatsci.2009.04.040 ↗
23. E. Hosseini and M. Kazeminezhad: Mater. Design, 2011, Vol. 32, pp. 487-494.10.1016/j.matdes.2010.08.033 ↗
24. E. Hosseini and M. Kazeminezhad: Comp. Mater. Sci., 2010, Vol. 48, pp. 166-173.10.1016/j.commatsci.2009.12.023 ↗
25. P. Mukherjee, A. Sarkar, P. Barat, S.K. Bandyopadhyay, P. Sen, S.K. Chattopadhyay, P. Chatterjee, S.K. Chatterjee, and M.K. Mitra: Acta Mater., 2004, Vol. 52, pp. 5687–96.10.1016/j.actamat.2004.08.030 ↗
26. Z. Zhang, F. Zhou, and E. J. Lavernia: Metall. Mater. Trans A, 2003, Vol. 34, pp. 1349-1355.10.1007/s11661-003-0246-2 ↗
27. E. Schafler, M. Zehetbauer, and T. Ungar: Mater. Sci. Eng. A, 2001, Vol. 319, pp. 220-223.10.1016/S0921-5093(01)00979-0 ↗
28. G. K. Williamson and W. H. Hall: Acta Mater., 1953, Vol. 1, pp. 22-31.10.1016/0001-6160(53)90006-6 ↗
29. T. Ungár, G. Tichy: Physica Status Solidi (a), 1999, Vol. 171 (2), pp. 425–34.10.1002/(SICI)1521-396X(199902)171:2<425::AID-PSSA425>3.0.CO;2-W ↗
30. M. Wilkens: Physica Status Solidi (a). 1970, Vol. 2 (2), pp. 359–70.10.1002/pssa.19700020224 ↗
31. B. Peeters, M. Seefeldt, C. Teodosiu, S. R. Kalidindi, P. Van Houtte and E. Aernoudt: Acta Mater., 2001, Vol. 49, pp. 1607-1619.10.1016/S1359-6454(01)00066-0 ↗
32. G.J. Richardson, D.N. Hawkins and C.M. Sellars: Worked examples in metalworking, 1985, Institute of Metals, London.
33. S.A. Argon: Strengthening Mechanisms in Crystal Plasticity, 2008, Oxford University Press, Oxford.10.1093/acprof:oso/9780198516002.001.0001 ↗
34. R. Lapovok, F.H. Dalla Torre, J. Sandlin, C.H.J. Davies, E.V. Pereloma, P.F. Thomson, and Y. Estrin: J. Mech. Phys. Solids, 2005, Vol. 53, pp. 729–47.10.1016/j.jmps.2004.11.006 ↗
35. S.C. Baik, Y. Estrin, H.S. Kim, R.J. Hellmig: Mater. Sci. Eng. A, 2003, Vol. 351(1-2), pp. 86-97.10.1016/S0921-5093(02)00847-X ↗
36. F.A. Mohamed: Acta Mater., 2003, Vol. 51(14), pp. 4107-4119.10.1016/S1359-6454(03)00230-1 ↗
37. P. Les, M. Zehetbauer, I. Kopacz, and E.F. Rauch: Scripta Mater., 1999, Vol. 41(5).10.1016/S1359-6462(99)00184-0 ↗
38. S.R. Bahadori, K. Dehghani, and F. Bakhshandeh: Mater. Sci. Eng. A, 2013, Vol. 588, pp. 260–264.10.1016/j.msea.2013.09.039 ↗
39. N. D. Stepanov, A. V. Kuznetsov, G. A. Salishchev, G. I. Raab, and R. Valiev: Mater. Sci. Forum, 2011, Vol. 667, pp. 295-300.