Ferrite Grain Refinement, Grain Size Distribution, and Texture After Thermomechanical Processing and Continuous Cooling of Low-C Steel
Source abstract
Abstract
Single-pass and multi-pass deformation schedules were applied over 973 K to 1323 K (700 °C to 1050 °C) using a Gleeble® thermomechanical simulator to understand the effect of the number of deformation passes, strain per pass, and interpass interval on ferrite grain refinement, particularly for the formation of an ultrafine ferrite grain structure (ULFG) with favorable high-angle grain boundaries and texture components. The microstructure, texture, and grain boundaries were characterized using SEM and EBSD. In the single-pass schedule, a decrease in deformation temperature from 1323 K to 1073 K (1050 °C to 800 °C) refined the ferrite grain size from 9.5 to 2.0 μm and intensified the beneficial γ-fiber (〈111〉//ND) texture. The ferrite grain size remained unchanged, whereas Cube and Goss texture strengthened with a further decrease in deformation temperature to 973 K (700 °C). For the multi-pass schedule at 1073 K (800 °C), where the total deformation was applied in three successive passes with 10-second interpass time, an ULFG structure was also developed with 2.5 μm grain size. Grain growth during the interpass intervals weakened the texture in the multi-pass deformed samples compared to that of the single-pass deformed samples. The evolution of microstructure and texture has been explained considering that restoration mechanisms (recrystallization, grain growth, and phase transformation) acted during and after deformation. Finally, ferrite grain refinement during different processing schedules was predicted using a simple mathematical approach based on the experimental data, with suggestions for future improvements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock: Mater. Sci. Eng. A, 2006, 441, vol. 441.10.1016/j.msea.2006.08.095 ↗
2. R. Song, D. Ponge, and D. Raabe: Acta Mater., 2005, vol. 53, pp. 4881–92.10.1016/j.actamat.2005.07.009 ↗
3. M. Calcagnotto, Y. Adachi, D. Ponge, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 658–70.10.1016/j.actamat.2010.10.002 ↗
4. K. Mukherjee, S.S. Hazra, and M. Militzer: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2145–59.10.1007/s11661-009-9899-9 ↗
5. P.D. Hodgson, A. Shokouhi, and H. Beladi: ISIJ Int., 2008, vol. 48, pp. 1046–9.10.2355/isijinternational.48.1046 ↗
6. A. Shokouhi and P.D. Hodgson: Mater. Sci. Technol., 2007, vol. 23, pp. 1233–42.10.1179/174328407X226617 ↗
7. A. Shokouhi and P.D. Hodgson: Mater. Sci. Technol., 2009, vol. 25, pp. 29–34.10.1179/174328408X259061 ↗
8. C. Zheng, N. Xiao, L. Hao, D. Li, and Y. Li: Acta Mater., 2009, vol. 57, pp. 2956–68.10.1016/j.actamat.2009.03.005 ↗
9. S.C. Hong and K.S. Lee: Mater. Sci. Eng. A, 2002, vol. 323, pp. 148–59.10.1016/S0921-5093(01)01359-4 ↗
10. N. Tsuji, R. Ueji, and Y. Minamino: Scr. Mater., 2002, vol. 47, pp. 69–76.10.1016/S1359-6462(02)00088-X ↗
11. H. Azizi-Alizamini, M. Militzer, and W.J. Poole: ISIJ Int., 2011, vol. 51, pp. 958–64.10.2355/isijinternational.51.958 ↗
12. R. Ueji, N. Tsuji, Y. Minamino, and Y. Koizumi: Acta Mater., 2002, vol. 50, pp. 4177–89.10.1016/S1359-6454(02)00260-4 ↗
13. T. Furuhara, T. Mizoguchi, and T. Maki: ISIJ Int., 2005, vol. 45, pp. 392–8.10.2355/isijinternational.45.392 ↗
14. H. Beladi, G.L. Kelly, and P.D. Hodgson: Int. Mater. Rev., 2007, vol. 52, pp. 14–28.10.1179/174328006X102538 ↗
15. P.J. Hurley and P.D. Hodgson: Mater. Sci. Eng. A, 2001, vol. 302, pp. 206–14.10.1016/S0921-5093(00)01823-2 ↗
16. M.R. Hickson, P.J. Hurley, R.K. Gibbs, G.L. Kelly, and P.D. Hodgson: Metall. Mater. Trans. A, 2002, vol. 33, pp. 1019–26.10.1007/s11661-002-0203-5 ↗
17. B. Eghbali and A. Abdullah-Zadeh: Scr. Mater., 2006, vol. 54, pp. 1205–9.10.1016/j.scriptamat.2005.11.026 ↗
18. H. Beladi, G.L. Kelly, and P.D. Hodgson: Metall. Mater. Trans. A, 2007, vol. 38, pp. 450–63.10.1007/s11661-006-9080-7 ↗
19. H. Dong and X. Sun: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 269–76.10.1016/j.cossms.2006.02.014 ↗
20. T. Morimoto, F. Yoshida, I. Chikushi, and J. Yanagimoto: ISIJ Int., 2007, vol. 47, pp. 1475–84.10.2355/isijinternational.47.1475 ↗
21. M. Etou, S. Fukushima, T. Sasaki, Y. Haraguchi, K. Miyata, M. Wakita, T. Tomida, N. Imai, M. Yoshida, and Y. Okada: ISIJ Int., 2008, vol. 48, pp. 1142–7.10.2355/isijinternational.48.1142 ↗
22. R. Barbosa, D.B. Santos, and R.E. Lino: Mater. Sci. Forum, 2007, vol. 558–559, pp. 471–8.10.4028/www.scientific.net/MSF.558-559.471 ↗
23. S. Patra, S. Neogy, V. Kumar, D. Chakrabarti, and A. Haldar: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4296–310.10.1007/s11661-012-1213-6 ↗
24. A. Karmakar, R.D.K. Misra, S. Neogy, and D. Chakrabarti: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2013, vol. 44, pp. 4106–18.10.1007/s11661-013-1757-0 ↗
25. G. Glover and C.M. Sellars: Metall. Trans., 1973, vol. 4, pp. 765–75.10.1007/BF02643086 ↗
26. S.V.S.N. Murty, S. Torizuka, K. Nagai, T. Kitai, and Y. Kogo: Scr. Mater., 2005, vol. 53, pp. 763–8.10.1016/j.scriptamat.2005.05.027 ↗
27. S.V.S. Narayana Murty, S. Torizuka, K. Nagai, T. Kitai, and Y. Kogo: Mater. Sci. Eng. A, 2007, vol. 457, pp. 162–8.10.1016/j.msea.2006.12.078 ↗
28. Y. Adachi, M. Wakita, H. Beladi, and P.D. Hodgson: Acta Mater., 2007, vol. 55, pp. 4925–34.10.1016/j.actamat.2007.05.024 ↗
29. Y. Adachi, P.G. Xu, and Y. Tomota: ISIJ Int., 2008, vol. 48, pp. 1056–62.10.2355/isijinternational.48.1056 ↗
30. H. Beladi, I.B. Timokhina, S. Mukherjee, and P.D. Hodgson: Acta Mater., 2011, vol. 59, pp. 4186–96.10.1016/j.actamat.2011.03.043 ↗
31. T. Inoue, F. Yin, Y. Kimura, K. Tsuzaki, and S. Ochiai: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2010, vol. 41, pp. 341–55.10.1007/s11661-009-0093-x ↗
32. M. Jafari, W.M. Garrison, and K. Tsuzaki: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2014, vol. 45, pp. 647–53.10.1007/s11661-013-2045-8 ↗
33. J. Sun, T. Jiang, H. Liu, S. Guo, and Y. Liu: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2016, vol. 47, pp. 5985–93.10.1007/s11661-016-3707-0 ↗
34. Y.M. Wang, M.W. Chen, F.H. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–5.10.1038/nature01133 ↗
35. S. Patra, S.M. Hasan, N. Narasaiah, and D. Chakrabarti: Mater. Sci. Eng. A, 2012, vol. 538, pp. 145–55.10.1016/j.msea.2011.12.114 ↗
36. B. Dutta and C.M. Sellars: Mater. Sci. Technol., 1987, vol. 3, pp. 197–206.10.1179/mst.1987.3.3.197 ↗
37. P.D.Hodgson and R.K. Gibbs: ISIJ Int., 1992, vol. 32, pp. 1329–38.10.2355/isijinternational.32.1329 ↗
38. F. Siciliano Jr. and J.J. Jonas: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 511–30.10.1007/s11661-000-0287-8 ↗
39. A.I. Fernández, P. Uranga, B. López, and J.M. Rodriguez-Ibabe: Mater. Sci. Eng. A, 2003, vol. 361, pp. 367–76.10.1016/S0921-5093(03)00562-8 ↗
40. M. Militzer: ISIJ Int., 2007, vol. 47, pp. 1–15.10.2355/isijinternational.47.1 ↗
41. E. Scheil: Z Met., 1942, vol. 34, pp. 70–2.
42. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997
43. S.C.M. and B.J.H.: in Proceedings of International Conference on HSLA Steels, D.P. Dune and T. Chandra, eds., South Coast Printers, Australia, 1985, pp. 142–50.
44. M. Militzer and Y. Brechet: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2009, vol. 40, pp. 2273–82.10.1007/s11661-009-9926-x ↗
45. A. Bodin, J. Sietsma, and S. van der Zwaag: Mater. Charact., 2001, vol. 47, pp. 187–93.10.1016/S1044-5803(01)00167-X ↗
46. S. Hong, S. Lim, K. Lee, D. Shin, and K. Lee: ISIJ Int., 2002, vol. 42, pp. 1461–7.10.2355/isijinternational.42.1461 ↗
47. R.K. Ray, J. Jonas: Int. Mater. Rev, 1990, vol. 35, pp. 1-3610.1179/095066090790324046 ↗
48. H Zhao, BP Wynne and EJ Palmiere: Materials Characterization, 2017, Vol. 123, pp. 128-13610.1016/j.matchar.2016.11.025 ↗
49. T. Hanamura, S. Torizuka, S. Tamura, S. Enokida and H. Takechi, ISIJ Int., 2013, V0l. 53, pp. 2218-222510.2355/isijinternational.53.2218 ↗
50. P. Chapellier, R.K. Ray, and J.J. Jonas: Acta Metall. Mater., 1990, vol. 38, pp. 1475–90.10.1016/0956-7151(90)90116-X ↗
51. S. Tsurekawa, S. Nakamichi, and T. Watanabe: Acta Mater., 2006, vol. 54, pp. 3617–26.10.1016/j.actamat.2006.03.048 ↗
52. C.-S. Kim, Y. Hu, G.S. Rohrer, and V. Randle: Scr. Mater., 2005, vol. 52, pp. 633–7.10.1016/j.scriptamat.2004.11.025 ↗
53. P.R. Rios, I.S. Bott, D.B. Santos, T.M.F. de Melo, J.L. Ferreira: Mater. Sci. Technol., 2007, vol. 23, pp. 417–22.10.1179/174328407X168900 ↗
54. H. Luo, J. Sietsma, S. Van der Zwaag, S. Van Der Zwaag: Metall. Mater. Trans. A, 2004, 35A, pp. 2789–97.10.1007/s11661-004-0225-2 ↗
55. M. Tong, D. Li, Y. Li, J. Ni, and Y. Zhang: Metall. Mater. Trans. A, 2004, vol. 35, pp. 1565–77.10.1007/s11661-004-0263-9 ↗