Effect of W Contents on Martensitic Transformation and Shape Memory Effect in Co-Al-W Alloys
Source abstract
Abstract
To clarify the effect of W contents on the shape memory effect (SME) in the Co-Al alloys and its influencing mechanism, the SME, martensitic transformation, and deformation behavior were studied in the Co-7Al-xW (x = 0, 4, 6, 9 wt pct) alloys. The results showed that the additions of W all deteriorated the SME in Co-7Al alloy when deformed at room temperature. However, when deformed in liquid nitrogen, the SME in Co-7Al alloy could be remarkably improved from 43 to 78 pct after the addition of 4 pct W, above which the SME decreased rapidly with the increase of W content although the yield strength of the parent phase rose due to the solution strengthening of W. The deterioration in SME induced by the excessive addition of W could be ascribed to its resulting significant drop of the start temperature of martensitic transformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. T. Omori, Y. Sutou, K. Oikawa, R. Kainuma, K. Ishida: Mater. Trans., 2003, Vol. 44, pp. 2732-2735.10.2320/matertrans.44.2732 ↗
2. T. Omori, Y. Sutou, K. Oikawa, R. Kainuma, K. Ishida: Scripta Mater., 2005, Vol. 52, pp. 565-569.10.1016/j.scriptamat.2004.12.001 ↗
3. T. Omori, Y. Sutou, K. Oikawa, R. Kainuma, K. Ishida: Mater. Sci. Eng., A, 2006, Vol. 438-440, pp. 1045-1049.10.1016/j.msea.2005.12.068 ↗
4. K. Ando, T. Omori, J. Sato, Y. Sutou, K. Oikawa, R. Kainuma, K. Ishida: Mater. Trans., 2006, Vol. 47, pp. 2381-2386.10.2320/matertrans.47.2381 ↗
5. X. Yang, B. J. Wu, H. B. Peng, Y. H. Wen: J. Alloys Compd., 2016, Vol. 695, pp. 1045-1051.10.1016/j.jallcom.2016.10.229 ↗
6. B. J. Wu, X. Yang, H. B. Peng, Y. H. Wen: Trans. Nonferrous Met. Soc. China, 2017, Vol. 27, pp. 382-389.10.1016/S1003-6326(17)60043-8 ↗
7. P. Chen, X. Yang, H. B. Peng, Y. H. Wen: Met. Funct. Mater., 2014, Vol. 21, pp. 1-4.
8. W. J. Buehler, F. E. Wang: Ocean Eng., 1968, Vol. 1, pp. 105-108.10.1016/0029-8018(68)90019-X ↗
9. C. Dellacorte, R. D. Noebe, M. K. Stanford, S. A. Padula: Report No. 217105, NASA Glenn Research Center, Cleveland, Ohio, August 2011.
10. Z. Qin, M. Yu, Y. Zhang: J. Mater. Sci., 1996, Vol. 31, pp. 2311-2315.10.1007/BF01152939 ↗
11. N. E. Stanford, K. Chen, D. P. Dunne, X. J. Jin: ISIJ Int., 2007, Vol. 47, pp. 883-889.10.2355/isijinternational.47.883 ↗
12. X. C. Wu, T. Y. Hsu, Z. Y. Xu: Mater. Charact., 2000, Vol. 45, pp. 137-142.10.1016/S1044-5803(00)00066-8 ↗
13. J. W. Sun, S. L. Wang, Z. W. Yan, H. B. Peng, Y. H. Wen: Metall. Mater. Trans. A, 2015, Vol. 46A, pp. 1550-1555.10.1007/s11661-015-2761-3 ↗
14. J. W. Sun, S. L. Wang, Z. W. Yan, H. B. Peng, Y. H. Wen: Mater. Sci. Eng., A, 2015, Vol. 639, pp. 456-464.10.1016/j.msea.2015.05.037 ↗
15. S. Kajiwara: Mater. Sci. Eng., A, 1999, Vol. 273-275, pp. 67-88.10.1016/S0921-5093(99)00290-7 ↗
16. Y. H. Wen, H. B. Peng, D. Raabe, I. Gutierrez-Urrutia, J. Chen, Y. Y. Du: Nat. Commun., 2014, Vol. 5, pp. 1-9.
17. J. Chen, J. W Sun, Q. Yang, H. B. Peng, S. L. Wang, Y. H. Wen: Adv. Eng. Mater., 2016, Vol. 18, pp. 1426-1433.10.1002/adem.201500645 ↗
18. A. Sato, E. Chishima, K. Soma, T. Mori: Acta Metall., 1982, Vol. 30, pp. 1177-1183.10.1016/0001-6160(82)90011-6 ↗
19. C.T. Sims, N.S. Stoloff, W.C. Hagel: Superalloys II: High-temperature Materials for Aerospace and Industrial Power, 1st ed., John Willey & Sons, New York, 1987, pp. 128-154.
20. T. L. Achmad, W. X. Fu, H. Chen, C. Zhang, Z. G. Yang: Comput. Mater. Sci., 2016, Vol. 121, pp. 86-96.10.1016/j.commatsci.2016.04.031 ↗
21. T. L. Achmad, W. X. Fu, H. Chen, C. Zhang, Z. G. Yang: J. Alloys Compd., 2017, Vol. 694, pp. 1265-1279.10.1016/j.jallcom.2016.10.113 ↗
22. N. V. Kazantseva, S. L. Demakov, A. S. Yurovskikh, N. N. Stepanova, N. I. Vinogradova, D. I. Davydov, S. V. Lepikhin: Phys. Met. Metallogr+, 2016, Vol. 117, No. 7, pp. 701-709.10.1134/S0031918X16070073 ↗
23. Y. F. Cui, X. Zhang, G. L. Xu, W. J. Zhu, H. S. Liu, Z. P. Jin: J. Mater. Sci., 2011, Vol. 46, pp. 2611-2621.10.1007/s10853-010-5115-y ↗
24. F. Xue, M. L. Wang, Q. Feng: Superalloys 2012: 12th Int. Symp. Superalloys, John Wiley & Sons, Inc., Hoboken, New Jersey. 2012. pp. 813–21.10.1002/9781118516430.ch90 ↗
25. F. Pyczak, A. Bauer, M. Goken, U Lorenz, S Neumeier, M. Oehring, J. Paul, N. Schell, A. Schreyer, A. Stark, F. Symanzik: J. Alloys Compd., 2015, Vol. 632, pp. 110-115.10.1016/j.jallcom.2015.01.031 ↗
26. Q. Yang, S. L. Wang, J. Chen, T. N. Zhou, H. B. Peng, Y. H. Wen: Acta Mater., 2016, Vol. 111, pp. 348-356.10.1016/j.actamat.2016.04.004 ↗
27. J. Chen, H. B. Peng, Q. Yang, S. L. Wang, F. Song, Y. H. Weng: Mater. Sci. Eng., A, 2016, Vol. 677, pp. 133-139.10.1016/j.msea.2016.09.006 ↗
28. H. Otsuka, H. Yamada, T. Maruyama, H. Tanahashi, S. Matsuda, M. Murakam: ISIJ Int., 1990, Vol. 30, pp. 674-679.10.2355/isijinternational.30.674 ↗
29. L. C. Zhao, W. Cai, Y. F. Zheng: Shape memory effect and superelasticity in alloys, 1st ed., National Defend Industry Press, Bei Jing, 2002, pp. 80-88.