The Compositional Dependence of the Microstructure and Properties of CMSX-4 Superalloys
Source abstract
Abstract
Abstract The degradation of creep resistance in Ni-based single-crystal superalloys is essentially ascribed to their microstructural evolution. Yet there is a lack of work that manages to predict (even qualitatively) the effect of alloying element concentrations on the rate of microstructural degradation. In this research, a computational model is presented to connect the rafting kinetics of Ni superalloys to their chemical composition by combining thermodynamics calculation and a modified microstructural model. To simulate the evolution of key microstructural parameters during creep, the isotropic coarsening rate andγ/γ′misfit stress are defined as composition-related parameters, and the effect of service temperature, time, and applied stress are taken into consideration. Two commercial superalloys, for which the kinetics of the rafting process are selected as the reference alloys, and the corresponding microstructural parameters are simulated and compared with experimental observations reported in the literature. The results confirm that our physical model not requiring any fitting parameters manages to predict (semiquantitatively) the microstructural parameters for different service conditions, as well as the effects of alloying element concentrations. The model can contribute to the computational design of new Ni-based superalloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. R. C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, United Kingdom, 2008.
2. Z. Zhu, H. Basoalto, N. Warnken, and R.C. Reed: Acta Mater., 2012, vol. 60, pp. 4888–4900.10.1016/j.actamat.2012.05.023 ↗
3. Siwen Gao, Marc Fivel, Anxin Ma, and Alexander Hartmaier: J. Mech. Phys. Solids, 2017, vol. 102, pp. 209–23.10.1016/j.jmps.2017.02.010 ↗
4. V.A. Vorontsov, R.E. Voskoboinikov, and Catherine M.F. Rae: Advanced Materials Research, Trans Tech Publications, Aedermannsdorf, 2011, pp. 150–55.
5. M. Cottura, B. Appolaire, A. Finel, and Y. Le Bouar: J. Mech. Phys. Solids, 2016, vol. 94, pp. 473–89.10.1016/j.jmps.2016.05.016 ↗
6. YS Choi, TA Parthasarathy, C Woodward, DM Dimiduk, and MD Uchic: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1861–69.10.1007/s11661-011-1047-7 ↗
7. F.R.N. Nabarro, Catherine M. Cress, and P. Kotschy: Acta Mater., 1996, vol. 44, pp. 3189–98.10.1016/1359-6454(95)00423-8 ↗
8. Tetsuya Ohashi, Kishio Hidaka, and Shinya Imano: Acta Mater., 1997, vol. 45, pp. 1801–10.10.1016/S1359-6454(96)00324-2 ↗
9. Julius C. Chang and Samuel M. Allen: J. Mater. Res., 1991, vol. 6, pp. 1843–55.10.1557/JMR.1991.1843 ↗
10. W-P Wu, Y-F Guo, G-S Dui, and Yue-Sheng Wang: Comput. Mater. Sci., 2008, vol. 44, pp. 259–64.10.1016/j.commatsci.2008.03.022 ↗
11. X.G. Liu, L. Wang, L.H. Lou, and J. Zhang: J. Mater. Sci. Technol., 2015, vol. 31, pp. 143–47.10.1016/j.jmst.2013.12.019 ↗
12. Bo Wang, Jun Zhang, Taiwen Huang, Haijun Su, Zhuoran Li, Lin Liu, and Hengzhi Fu: J. Mater. Res., 2016, vol. 31, pp. 3381–89.10.1557/jmr.2016.355 ↗
13. J.J. Huo, Q.Y. Shi, and Q. Feng: Mater. Sci. Eng. A, 2017, vol. 693, pp. 136–44.10.1016/j.msea.2017.03.081 ↗
14. Ralf Rettig, Nils C. Ritter, Harald E. Helmer, Steffen Neumeier, and Robert F. Singer: Model. Simul. Mater. Sci., 2015, vol. 23, p. 035004.10.1088/0965-0393/23/3/035004 ↗
15. R.C. Reed, T. Tao, and N. Warnken: Acta Mater., 2009, vol. 57, pp. 5898–5913.10.1016/j.actamat.2009.08.018 ↗
16. A Epishin, T Link, H Klingelhöffer, B Fedelich, U Brückner, PD Portella: Mater. Sci. Eng. A, 2009, vol. 510, pp. 262–65.10.1016/j.msea.2008.04.135 ↗
17. A. Scholz, Y. Wang, S. Linn, C. Berger, and R. Znajda: Mater. Sci. Eng. A, 2009, vol. 510, pp. 278–83.10.1016/j.msea.2008.04.103 ↗
18. A. Epishin, T. Link, M. Nazmy, M. Staubli, H. Klingelhoffer, and G. Nolze: Superalloys, 2008, pp. 725–31.10.7449/2008/Superalloys_2008_725_731 ↗
19. C. Girish Shastry, V. Sivakumar, G. Kelekanjeri, T. Vishwanath, and S. Chaudhuri: Mater. Sci. Eng. A, 2013, vol. 585, pp. 47–56.10.1016/j.msea.2013.07.034 ↗
20. Bernard Fedelich, Georgia Künecke, Alexander Epishin, Thomas Link, and Pedro Portella: Mater. Sci. Eng. A, 2009, vols. 510–511, pp. 273–77.10.1016/j.msea.2008.04.089 ↗
21. Fedelich B, Epishin A, Link T, Klingelhöffer H, Künecke G, Portella PD: Superalloys 2012, TMS, Warrendale, PA, 2012, pp. 491–500.10.1002/9781118516430.ch54 ↗
22. Ya-Nan Fan, Hui-Ji Shi, and Wen-Hui Qiu: Mater. Sci. Eng. A, 2015, vol. 644, pp. 225–33.10.1016/j.msea.2015.07.058 ↗
23. J Gong, D Snyder, T Kozmel, C Kern, JE Saal, I Berglund, J Sebastian, and G Olson: JOM, 2017, vol. 69, pp. 880–885.10.1007/s11837-017-2300-3 ↗
24. Cheng Ai, Xinbao Zhao, Jian Zhou, Heng Zhang, Lei Liu, Yanling Pei, Shusuo Li, and Shengkai Gong: J. Alloy Compd., 2015, vol. 632, pp. 558–62.10.1016/j.jallcom.2015.01.215 ↗
25. Qi Lu, Wei Xu, and Sybrand van der Zwaag: Phil. Mag., 2013, vol. 93, pp. 3391–3412.10.1080/14786435.2013.809493 ↗
26. Qi Lu, Wei Xu, and Sybrand van der Zwaag: Comp. Mater. Sci., 2014, vol. 84, pp. 198–205.10.1016/j.commatsci.2013.12.009 ↗
27. Qi Lu, Wei Xu, and Sybrand van der Zwaag: Acta Mater., 2014, vol. 77, pp. 310–23.10.1016/j.actamat.2014.06.007 ↗
28. Q. Lu, W. Xu, and S. van der Zwaag: Acta Mater., 2014, vol. 64, pp. 133–43.10.1016/j.actamat.2013.10.004 ↗
29. Xiyuan Yang, Wangyu Hu, and Xingming Zhang: Appl. Surf. Sci., 2013, vol. 264, pp. 563–69.10.1016/j.apsusc.2012.10.065 ↗
30. D. Dye, J. Coakley, V.A. Vorontsov, H.J. Stone, and R.B. Rogge: Scripta Mater., 2009, vol. 61, pp. 109–12.10.1016/j.scriptamat.2009.03.008 ↗
31. Y Amouyal, Z Mao, and DN Seidman: Acta Mater., 2010, vol. 58, pp. 5898–5911.10.1016/j.actamat.2010.07.004 ↗
32. M Palumbo, D Baldissin, L Battezzati, O Tassa, R Wunderlich, HJ Fecht, R Brooks, and K Mills: Materials Science Forum, Trans Tech Publications, Aedermannsdorf, 2006, pp. 591–96.
33. S.C.H. Llewelyn, K.A. Christofidou, V.J. Araullo-Peters, N.G. Jones, M.C. Hardy, E.A. Marquis, and H.J. Stone: Acta Mater., 2017, vol. 131, pp. 296–304.10.1016/j.actamat.2017.03.067 ↗
34. Kamil Matuszewski, Alexander Müller, Nils Ritter, Ralf Rettig, Krzysztof J. Kurzydłowski, and Robert F. Singer: Adv. Eng. Mater., 2015, vol. 17, pp. 1127–33.10.1002/adem.201500173 ↗
35. K. Matuszewski, R. Rettig, H. Matysiak, Z. Peng, I. Povstugar, P. Choi, J. Müller, D. Raabe, E. Spiecker, K.J. Kurzydłowski, and R.F. Singer: Acta Mater., 2015, vol. 95, pp. 274–83.10.1016/j.actamat.2015.05.033 ↗
36. K. Serin, G. Göbenli, and G. Eggeler: Mater. Sci. Eng. A, 2004, vol. 387, pp. 133–37.10.1016/j.msea.2004.01.114 ↗
37. L.J. Carroll, Q. Feng, and T.M. Pollock: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1290–1307.10.1007/s11661-008-9520-7 ↗
38. R.A. MacKay, T.P. Gabb, A. Garg, R.B. Rogers, and M.V. Nathal: NASA Glenn Research Center, Cleveland, OH, unpublished research, 2012.
39. J.X. Zhang, T. Murakumo, H. Harada, and Y. Koizumi: Scripta Mater., 2003, vol. 48, pp. 287–93.10.1016/S1359-6462(02)00379-2 ↗
40. R.A. MacKay, T.P. Gabb, A. Garg, R.B. Rogers, and M.V. Nathal: Mater. Charact., 2012, vol. 70, pp. 83–100.10.1016/j.matchar.2012.05.001 ↗
41. G.L. Erickson: Superalloys 1996, TMS, Warrendale, PA, 1996, pp. 35–44.
42. W.S. Walston, K.S. Hara, E.W. Ross, T.M. Pollock, and W.H. Murphy: Superalloys 1996, TMS, Warrendale, PA, 1996, pp 27–34.
43. Catherine M.F. Rae and Roger C. Reed: Acta Mater., 2001, vol. 49, pp. 4113–25.10.1016/S1359-6454(01)00265-8 ↗
44. A. Heckl, S. Neumeier, M. Göken, and R.F. Singer: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3435–44.10.1016/j.msea.2011.01.023 ↗
45. Pierre Caron and Tasadduq Khan: Aerosp. Sci. Technol., 1999, vol. 3, pp. 513–23.10.1016/S1270-9638(99)00108-X ↗
46. K. Matuszewski, R. Rettig, and R.F. Singer: MATEC Web Conference, EDP Sciences, 2014, p. 09001.10.1051/matecconf/20141409001 ↗
47. J.Y. Chen, Q. Feng, L.M. Cao, and Z.Q. Sun: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3791–98.10.1016/j.msea.2011.01.060 ↗
48. M.V. Nathal and L.J. Ebert: Metall. Trans. A, 1985, vol. 16A, pp. 1849–62.10.1007/BF02670372 ↗
49. R.L. Dreshfield and K.J. Thomas: unpublished research, 2005.
50. A.K. Jena and M.C. Chaturvedi: J. Mater. Sci., 1984, vol. 19, pp. 3121–39.10.1007/BF00549796 ↗
51. P.T. Forde: Adv. Mater. Process., 1996, vol. 149, p. 4.
52. M.S.A. Karunaratne, C.M.F. Rae, and R.C. Reed: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2409–21.10.1007/s11661-001-0032-y ↗
53. C Booth-Morrison, Z Mao, RD Noebe, and DN Seidman: Appl. Phys. Lett., 2008, vol. 93, p. 033103.10.1063/1.2956398 ↗
54. V. Biss and D.L. Sponseller: Metall. Trans., 1973, vol. 4, pp. 1953–60.10.1007/BF02665423 ↗
55. A.F. Giamei and D.L. Anton: Metall. Trans. A, 1985, vol. 16A, pp. 1997–2005.10.1007/BF02662400 ↗
56. Kevin E. Yoon, Ronald D. Noebe, and David N. Seidman: Acta Mater., 2007, vol. 55, pp. 1159–69.10.1016/j.actamat.2006.08.024 ↗
57. CL Fu, R Reed, A Janotti, and M Krcmar: Superalloys, TMS, Warrendale, PA, 2004, pp. 867–76.10.7449/2004/Superalloys_2004_867_876 ↗
58. A. Janotti, M. Krčmar, C.L. Fu, and R.C. Reed: Phys. Rev. Lett., 2004, vol. 92, p. 085901.10.1103/PhysRevLett.92.085901 ↗