journal article·2017-11Open access

Strain-Rate and Temperature Dependences of Deformation Behavior of AZ61Mg Alloy Processed by Multi-directional Forging Under Decreasing Temperature Conditions

C. Watanabe, R. Monzen, R. Ueji, H. Miura

Abstract

Strain-rate and temperature dependences of deformation behavior of ultrafine-grained (UFGed) AZ61Mg alloy were examined. For this purpose, AZ61Mg alloy specimens were subjected to multi-directional forging (MDFing) under decreasing temperature conditions to have various grain sizes. The average grain sizes attained by MDFing to 1, 3, 6 and 9 passes were approximately 8, 2, 0.5 and 0.3 μm, respectively. A superior balance of the mechanical properties of strength and ductility at room temperature was achieved by MDFing to three passes and over. The strain-rate sensitivity of mechanical properties of the MDFed specimens increased with decreasing grain size. The specimens with grain sizes of 0.5 and 0.3 μm (0.5 or 0.3 specimen) exhibited stronger strain-rate and temperature dependences of total elongation than those with grain sizes of 8 and 2 μm (8 or 2 specimen). This can be partially ascribed to grain-boundary sliding, since an AFM observation revealed the occurrence of room-temperature grain-boundary sliding in the 0.3 specimen. The activation volume V* for the 8, 2 and 0.5 specimen increased with increasing temperature, while the 0.3 specimen exhibited an inverse temperature dependence of V*. This suggests a change in deformation mechanism with decreasing grain size as well as the occurrence of grain-boundary sliding. © 2017 The Minerals, Metals & Materials Society and ASM International Embargo Period 12 months The final publication is available at www.springerlink.com/article/10.1007/s11661-017-4303-7 金沢大学理工研究域機械工学系
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. M. Kai, Z. Horita and T. G. Langdon: Mater. Sci. Eng. A, 2008, vol. 488, pp. 117-124.10.1016/j.msea.2007.12.046 ↗
2. R. Lapovok, P. F. Thomson and R. Cottam: J. Mater. Sci., 2005, vol. 40, pp. 1699-1708.10.1007/s10853-005-0672-1 ↗
3. A. Yamashita, Z. Horita and T. G. Langdon: Mater. Sci. Eng. A, 2001, vol. 300, pp. 142-147.10.1016/S0921-5093(00)01660-9 ↗
4. Y. Yoshida, L. Cisar, S. Camado and Y. Kojima: J. JILM, 2002, vol. 52, pp. 559-565.10.2464/jilm.52.559 ↗
5. J. Xing, X. Yang, H. Miura and T. Sakai: Mater. Trans., 2008, vol. 49, pp. 69-75.10.2320/matertrans.ME200705 ↗
6. H. Miura, X. Yang and T. Sakai: Rev. Adv. Mater. Sci., 2013, vol. 33, pp. 92-96.
7. H .Miura, G. Yu and X. Yang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6981-6992.10.1016/j.msea.2011.05.050 ↗
8. Y. M. Wang and E. Ma: Appl. Phys. Lett., 2003, vol. 83, pp. 3165-3167.10.1063/1.1618370 ↗
9. Q. Wei, S. Cheng, K. T. Ramesh and E. Ma: Mater. Sci. Eng. A, 2004, vol. 381pp. 71-79.10.1016/j.msea.2004.03.064 ↗
10. F. H. Dalla Torre, E. V. Pereloma and C. H. J. Davies: Scr. Mater., 2004, vol. 51, pp. 367-371.10.1016/j.scriptamat.2004.05.021 ↗
11. F. H. Dalla Torre, E. V. Pereloma and C. H. J. Davies: Acta Mater., 2006, vol. 54, pp. 1135-1146.10.1016/j.actamat.2005.10.041 ↗
12. T. Yokoyama: J. JILM., 2001, vol. 51, pp. 544-550.10.2464/jilm.51.544 ↗
13. T. Nicholas: Exp. Mech., 1981, vol. 21, pp. 177-185.10.1007/BF02326644 ↗
14. Japan Institute of Metals and Materials: Kinzoku Data Book, 5th ed., Maruzen, Tokyo, 1990, p. 634.
15. H. W. Höppel, J. May, P. Eisenlohr and M. Göken: Z. Metallkd., 2005, vol. 96, pp. 566–571.10.3139/146.101071 ↗
16. J. May, H. W. Höppel and M. Göken: Scr. Mater., 2005, vol. 53, pp. 189–194.10.1016/j.scriptamat.2005.03.043 ↗
17. T. Kunimine, N. Takata, N. Tsuji, T. Fujii, M. Kato and S. Onaka: Mater. Trans., 2009, vol. 50, pp. 64-69.10.2320/matertrans.MD200809 ↗
18. M. Kato, T. Fuji and S. Onaka: Mater. Trans., 2008, vol. 49, pp. 1278-1283.10.2320/matertrans.MRA2008012 ↗
19. R. Armstrong, I. Codda, R. M. Douthwaitea and N. J. Petchac: Phil. Mag., 1962, vol. 7, pp. 45-58.10.1080/14786436208201857 ↗
20. H. Conrad: High-strength materials, 1965, John Wiley & Sons, New York.
21. W. Bochniak: Acta Metall. Mater., 1995, vol. 43, pp. 225-233.
22. H. Conrad and D. Yang: J. Electron Mater., 2002, vol. 31, pp. 304–312.10.1007/s11664-002-0148-x ↗
23. H. Conrad: Mater. Sci. Eng. A, 2003, vol. 341, pp. 216-228.10.1016/S0921-5093(02)00238-1 ↗
24. Y. M. Wang, A. V. Hamza and E. Ma: Acta Mater., 2006, vol. 54, pp. 2715–2726.10.1016/j.actamat.2006.02.013 ↗
25. M. Kato: Mater. Sci. Eng. A, 2009, vol. 516, pp. 276-282.10.1016/j.msea.2009.03.035 ↗
26. T. Kunimine, T. Aragaki, T. Fujii, S. Onaka and M Kato: J. Mater. Sci., 2011, vol. 46, pp. 4302-4307.10.1007/s10853-010-5243-4 ↗
27. J. Koike, R. Ohyama, T. Kobayashi, M Suzuki and K. Murayama: Mater. Trans., 2003, vol. 44, pp. 445-451.10.2320/matertrans.44.445 ↗
28. R. Raj and M. F. Ashby: Metall. Trans, 1971, vol. 2, pp. 1113-1127.10.1007/BF02664244 ↗
29. T. Mori, M. Koda and R. Monzen: Acta Metall., 1983, vol. 31, pp. 275-283.10.1016/0001-6160(83)90104-9 ↗
30. R. Monzen, K. Kitagawa and T. Mori: Acta Metall., 1989, vol. 37, pp. 1619-1625.10.1016/0001-6160(89)90128-4 ↗
31. H. Miura, K. Matsumoto and M. Kobayashi: J. Jpn. Inst. Met. Mater., 2015, vol. 79, pp. 295-302.10.2320/jinstmet.J2014055 ↗
32. R. Z. Valiev and O. A. Kaibyshev: Acta Metall., 1983, vol. 31, pp. 2121-212810.1016/0001-6160(83)90031-7 ↗
33. S. Hwang, C. Nishimura and P. G. McCormick: Scr. Mater., 2001, vol. 44, pp. 1507-1511.10.1016/S1359-6462(01)00716-3 ↗
34. A. Ball and M. M. Hutchison: Metal Sci. Journal, 1969, vol. 3, pp. 1-7.10.1179/msc.1969.3.1.1 ↗
35. M. F. Ashby and R. A. Verrall: Acta Metall., 1973, vol. 21, pp. 149-163.10.1016/0001-6160(73)90057-6 ↗
36. R. Monzen and Y. Sumi: Phil. Mag. A, 1994, vol. 70, pp. 805-817.10.1080/01418619408242932 ↗