The Influence of the Thermomechanical Processing Regime on the Structural Evolution of Mo-Nb-Ti-V Microalloyed Steel Subjected to High-Pressure Torsion
Source abstract
Abstract
In the present study the effect of the thermal-mechanical processing regime—cold high-pressure torsion (HPT) at room temperature, cold HPT followed by annealing at 773 K (500 °C), and warm HPT at 723 K (450 °C)—on the peculiarities of the microstructure and microhardness of a Mo-Nb-Ti-V-0.08C microalloyed steel was analyzed. HPT processing resulted in high deformation and refinement of the initial structure and produced an ultrafine-grained microstructure featuring different morphologies with fine (<5 nm) and coarse (15 to 20 nm) carbides and with a mean size of the ferrite grain-subgrain structural elements of ≈100 nm. After room-temperature HPT, a mixed grain-subgrain structure with a high microhardness of 608 HV was obtained. Warm HPT caused formation of an ultrafine-grained structure with a microhardness of 553 HV. After annealing of cold HPT-processed specimens at 773 K (500 °C), a partial recovery of the structure occurred, but the average size of the structural elements and their distribution varied only slightly whereas the microhardness increased to 642 HV. The variations in the microhardness with the processing regime were correlated to changes in microstructural parameters (grain size, dislocation density and precipitation strengthening).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, Y.T. Zhu: JOM, 2006, vol. 58, pp. 33-39.10.1007/s11837-006-0213-7 ↗
2. A.P. Zhilyaev and T.G. Langdon: Prog Mater Sci, 2008, vol. 53, pp. 893-979.10.1016/j.pmatsci.2008.03.002 ↗
3. R. Song, D. Ponge, D. Raabe, J.G. Speer, D.K. Matlock: Mater Sci Eng A, 2006, vol. 441, pp. 1-17.10.1016/j.msea.2006.08.095 ↗
4. B.Q. Han, S.Yue: J Mater Proces Technol, 2003, vol. 136, pp. 100-104.10.1016/S0924-0136(02)01014-2 ↗
5. M.V. Degtyarev, T.I. Chashchukhina, L.M. Voronova, A.M. Patselov, V.P. Pilyugin: Acta Mater, 2007, vol. 55, pp. 6039-50.10.1016/j.actamat.2007.04.017 ↗
6. M. Papa Rao, V. Subramanya Sarma, S. Sankaran: Mater Sci Eng A, 2013, vol. 568, pp. 171-75.10.1016/j.msea.2012.12.084 ↗
7. G. Azevedo, R. Barbosa, E.V. Pereloma, D.B. Santos: Mater Sci Eng A, 2005, vol. 402, pp. 98-108.10.1016/j.msea.2005.04.026 ↗
8. Y. Ivanisenko, R.K. Wunderlich, R.Z. Valiev, H.-J. Fecht: Scripta Mater, 2003, vol. 49, pp. 947-952.10.1016/S1359-6462(03)00478-0 ↗
9. D.H. Shin, K.-T. Park: Mater Sci Eng A, 2005, vol. 410-411, pp. 299-302.10.1016/j.msea.2005.08.025 ↗
10. G.G. Maier, E.G. Astafurova, H.J. Maier, E.V. Naydenkin, G.I. Raab, P.D. Odessky, S.V. Dobatkin: Mater Sci Eng A, 2013, vol. 581, pp. 104-107.10.1016/j.msea.2013.05.075 ↗
11. K.-T. Park, D.H. Shin: Mater Sci Eng A, 2002, vol. 334, pp. 79-86.10.1016/S0921-5093(01)01796-8 ↗
12. D.B. Williams and C.B. Carter: Transmission Electron Microscopy. Textbook for Materials Science, Springer, USA, 2009.10.1007/978-0-387-76501-3 ↗
13. G.K. Williamson and R.E. Smallman: Phil Mag, 1956, vol. 1, pp. 34-46.10.1080/14786435608238074 ↗
14. G.G. Maier, E.G. Astafurova, V.S. Koshovkina, G.V. Chomyakova, E.V. Naydenkin, P.D. Odessky, S.V. Dobatkin: IOP Conf Series: Mater Sci Eng, 2014, vol. 63, pp. 012133.10.1088/1757-899X/63/1/012133 ↗
15. H.J. Goldschmidt: Interstitial Alloys, Elsevier, London, 1967.10.1007/978-1-4899-5880-8 ↗
16. L.M. Voronova, M.V. Degtyarev, T.I. Chashchukhina: Phys Met Metallogr, 2004, vol. 98, pp. 83-91.
17. F.J. Humphreys and M. Hartley: Recrystallization and Related Fenomena, 2nd edn., Elsevier, Oxford, 2004.
18. T. Gladman: Mater Sci Technol, 1999, vol. 15, pp. 30-36.10.1179/026708399773002782 ↗
19. J. Janovec, M. Svoboda, A. Vyrostkova, A. Kroupa: Mater Sci Eng A, 2005, vol. 402, pp. 288-293.10.1016/j.msea.2005.04.048 ↗
20. J. Dong, X. Zhou, Y. Liu, C. Li, C. Liu, Q. Guo: Mater Sci Eng A, 2017, vol. 683, pp. 215-226.10.1016/j.msea.2016.12.019 ↗
21. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Maney, London, 1997.
22. S.H. Hashemi: Mater Sci Eng A, 2011, vol. 528, pp. 1648-1655.10.1016/j.msea.2010.10.089 ↗
23. H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels. Microstructure and properties, 3rd edn., Elsevier, Oxford, 2006.