Statistical Study to Evaluate the Effect of Processing Variables on Shrinkage Incidence During Solidification of Nodular Cast Irons
Source abstract
Abstract
The study of shrinkage incidence variations in nodular cast irons is an important aspect of manufacturing processes. These variations change the feeding requirements on castings and the optimization of risers’ size is consequently affected when avoiding the formation of shrinkage defects. The effect of a number of processing variables on the shrinkage size has been studied using a layout specifically designed for this purpose. The β parameter has been defined as the relative volume reduction from the pouring temperature up to the room temperature. It is observed that shrinkage size and β decrease as effective carbon content increases and when inoculant is added in the pouring stream. A similar effect is found when the parameters selected from cooling curves show high graphite nucleation during solidification of cast irons for a given inoculation level. Pearson statistical analysis has been used to analyze the correlations among all involved variables and a group of Bayesian networks have been subsequently built so as to get the best accurate model for predicting β as a function of the input processing variables. The developed models can be used in foundry plants to study the shrinkage incidence variations in the manufacturing process and to optimize the related costs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · High Temperature Alloys and Creep · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. N. S. Tiedje: Mat. Sci. Technol., 2010, vol. 26, pp 505-14.10.1179/026708310X12668415533649 ↗
2. P. Larrañaga, J. Sertucha, R. Suárez: Rev. Metal., 2006, vol. 42, pp 244-55.10.3989/revmetalm.2006.v42.i4.24 ↗
3. A. Tadesse, H. Fredriksson: Mat. Sci. Forum, 2014, vol. 790-791, pp 447-51.10.4028/www.scientific.net/MSF.790-791.447 ↗
4. G. Alonso, A. Loizaga, G. Zarrabeitia, D.M. Stefanescu, and R. Suárez: AFS Trans., (2014) vol. 122, paper 14-006
5. M. Hecht: Editions Techniques des Industries de Fonderie, (CTIF, 2008)
6. S. I. Karsay: AFS Int. Cast Metals J., 1980, vol. 5, pp 45-51.
7. [7] D. M. Stefanescu, H. Q. Qiu, C. H. Chen: AFS Trans., 1995, vol. 103, pp 189-97.
8. R.V. Sillen: World Foundry Congress, Harrogate, 2006
9. R. W. Heine: AFS Trans., 1988, vol. 96, pp 413-22.
10. J.-M. Théret and G. Lesoult: Hommes et Fonderie, 1984, février, pp 19–30
11. G. Lesoult: Int. J. Cast Metal. Res., 2009, vol. 22, pp 2-7.10.1179/136404609X367696 ↗
12. T. Skaland: Int. J. Cast Metal. Res., 2003, vol. 16, pp 11-16.10.1080/13640461.2003.11819551 ↗
13. P. Larrañaga, J. M. Gutiérrez, A. Loizaga, J. Sertucha, R. Suárez: AFS Trans., 2008, vol. 116, pp 547-61.
14. J. M. Frost, D. M. Stefanescu: AFS Trans., 1992, vol. 100, pp 189-99.
15. T. Kanno, I. Kang, Y. Fukuda, T. Mizuki, and S. Kiguchi: AFS Trans., 2006, vol. 114, paper 06-084.
16. P. Zhu, R. W. Smith: AFS Trans., 1995, vol. 103, pp 601-09.
17. L. Battezzati, M. Baricco, C. A. Goria, G. Serramoglia, F. Marongiu: Int. J. Cast Metal. Res., 2003, vol. 16, pp 87-92.10.1080/13640461.2003.11819564 ↗
18. M. Castro, M. Herrera, M. M. Cisneros, G. Lesoult, J. Lacaze: Int. J. Cast Metal. Res., 1999, vol. 11, pp 369-74.10.1080/13640461.1999.11819301 ↗
19. T. Kanno, I. Kang, Y. Fukuda, M. Morinaka, and H. Nakae: AFS Trans., 2006, vol. 114, paper 06-083.
20. J. Sertucha, R. Suárez, J. Izaga, L. A. Hurtado, J. Legazpi: Int. J. Cast Metal. Res., 2006, vol. 19, pp 315-22.10.1179/136404606X167114 ↗
21. K. M. Pedersen, N. S. Tiedje: Int. J. Cast Metal. Res., 2007, vol. 20, pp 145-50.10.1179/136404607X239816 ↗
22. T. Bayes: Philosophical Transactions of the Royal Society, 1763, vol. 53, pp 370-41810.1098/rstl.1763.0053 ↗
23. E. Castillo, J.M. Gutiérrez, A.S. Hadi: Expert Systems and Probabilistic Network Models, New York: Springer Science & Business Media, 2012.
24. J. Pearl and S. Russell: Computer Science Department, University of California, Los Angeles, Technical report R-216, 2000
25. C.M. Bishop: Neural Networks for Pattern Recognition, 1st ed., Oxford University Press, Oxford,1995.10.1093/oso/9780198538493.001.0001 ↗
26. C. M. Bishop: Pattern recognition and machine learning, 1st ed., Springer, New York, 2006.
27. G.H. John and P. Langley: 11st Conference on uncertainty in artificial intelligence, San Mateo, 1995, pp 338–45
28. G.F. Cooper and E. Herskovits: 7th Conference on Uncertainty in artificial intelligence, Los Angeles, 1991, pp 86–9410.1016/B978-1-55860-203-8.50015-2 ↗
29. S. Russell, P. Norvig: Artificial Intelligence: A Modern Approach, Prentice-Hall, Egnlewood Cliffs, 2003.
30. R.R. Bouckaert: Bayesian belief Networks: From Construction to Inference, PhD thesis, Utrecht, 1995
31. U. B. Kjærulff, A. L. Madsen: Bayesian networks and influence diagrams: a guide to construction and analysis, 1st ed., Springer, New York, USA, 2008.10.1007/978-0-387-74101-7 ↗
32. S. V. Stehman: Remote Sens. Environ., 1997, vol. 62, pp 77-8910.1016/S0034-4257(97)00083-7 ↗