journal article·2017-04

Solidification Behavior and Cooling Curves for Hypereutectic Fe-21 At. Pct B Alloy

Junfeng Xu, Zengyun Jian, Bo Dang, Di Zhang, Feng Liu

Publisher page

Abstract

The cooling curves for Fe-21 at. pct B hypereutectic alloy were measured, which are correlated with the solidification behaviors. At small undercoolings, the cooling curve has two recalescences, corresponding to L → Fe2B and L → Fe2B + Fe, respectively. At moderate undercoolings, also two recalescences can be observed from the cooling curve, corresponding to L → Fe3B and L + Fe3B → Fe2B + Fe. At large undercoolings, the cooling curve has only one recalescence, corresponding to L → Fe3B + Fe. From TEM analysis, the matrix phase is α-Fe in cases of solidification at small and moderate undercoolings, but is Fe3B in case of large undercooling. HRTEM analysis shows that α-Fe stores deformation energy by irregular atom region, but intermetallic phase (Fe2B or Fe3B) stores deformation energy by increasing grain boundaries and stacking faults, which can explain why α-Fe has good deformation ability and small hardness, but the Fe2B or Fe3B phase on the contrary.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical and Alloy Processes · Magnetic Properties of Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. S. Farahany, A. Ourdjini, M.H. Idris, and S.G. Shabestari: J. Therm. Anal. Calorim., 2013, vol. 114, pp. 705–17.10.1007/s10973-013-3005-7 ↗
2. W. Oldfield: J. Less Common Met., 1959, vol. 1, pp. 77–79.10.1016/0022-5088(59)90022-0 ↗
3. M.S. Rahman, N. Guizani, M. Al-Khaseibi, S.A. Al-Hinai, S.S. Al-Maskri, and K. Al-Hamhami: Food Hydrocolloid., 2002, vol. 16, pp. 653–59.10.1016/S0268-005X(02)00031-0 ↗
4. J.W. Gibbs, M.J. Kaufman, R.E. Hackenberg, and P.F. Mendez: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2216–23.10.1007/s11661-010-0318-z ↗
5. M. Djurdjevic, D. Muche, B. Stauder, and K. Eigenfeld: Prakt. Metallogr./Pract. Metallogr., 2012, vol. 49, pp. 356–76.
6. S.A. Moir and D.M. Herlach: Acta Mater., 1997, vol. 45, pp. 2827–37.10.1016/S1359-6454(96)00376-X ↗
7. D.M. Herlach, J. Gao, D. Holland-Moritz, and T. Volkmann: Mater. Sci. Eng. A, 2004, vols. 375–377, pp. 9–15.10.1016/j.msea.2003.10.308 ↗
8. T.G. Woodcock, R. Hermann, and W. Löser: Calphad, 2007, vol. 31, pp. 256–63.10.1016/j.calphad.2006.11.004 ↗
9. L. Battezzati, C. Antonione, and M. Baricco: J. Alloys Compd., 1997, vol. 247, pp. 164–71.10.1016/S0925-8388(96)02570-4 ↗
10. M. Palumbo, G. Cacciamani, E. Bosco, and M. Baricco: Intermetallics, 2003, vol. 11, pp. 1293–99.10.1016/S0966-9795(03)00171-7 ↗
11. V. Bialiauskaya and T. Ando: J. Mater. Process. Technol., 2010, vol. 210, pp. 487–96.10.1016/j.jmatprotec.2009.10.011 ↗
12. W. Yang, F. Liu, G.C. Yang, Z.F. Xu, J.H. Wang, and Z.T. Wang: Thermochim. Acta, 2012, vol. 527, pp. 47–51.10.1016/j.tca.2011.10.003 ↗
13. C.L. Yang, F. Liu, G.C. Yang, and Y.H. Zhou: J. Cryst. Growth, 2009, vol. 311, pp. 404–12.10.1016/j.jcrysgro.2008.11.025 ↗
14. T.G. Chart: Comm. Comm. Eur. CECA No. 7210-CA/3/303, 1981.
15. P. H. Shingu: Amorphous Material—Physics and Technology, Committee of the Special Project Research on Amorphous Material, 1983, p. 149.
16. B. Hallemans, P. Wollants, and J.R. Roos: Z. Metallkd., 1994, vol. 85, pp. 676–82.
17. E. Bosco and M. Baricco: Metall. Ital., 2001, vol. 93, pp. 45–51.
18. O. Tolochko and J. Agren: J. Phase Equilib., 2001, vol. 21, pp. 19–24.10.1361/105497100770340372 ↗
19. M. Palumbo, G. Cacciamani, E. Bosco, and M. Baricco: Calphad, 2001, vol. 25, pp. 625–37.10.1016/S0364-5916(02)00012-3 ↗
20. M. Palumbo, G. Cacciamani, E. Bosco, and M. Baricco: Intermetallics, 2003, vol. 11, pp. 1293–99.10.1016/S0966-9795(03)00171-7 ↗
21. D. Zhang, J.F. Xu, and F. Liu: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 5232–39.10.1007/s11661-015-3104-0 ↗
22. M. Palumbo, C. Papandrea, and L. Battezzati: J. Mater. Sci., 2005, vol. 40, pp. 2431–35.10.1007/s10853-005-1970-3 ↗
23. J.F. Xu, D. Zhang, F. Liu, and Z.Y. Jian: J. Mater. Res., 2015, vol. 30, pp. 3307–15.10.1557/jmr.2015.295 ↗
24. J.F. Xu, F. Liu, and D. Zhang: J. Mater. Res., 2013, vol. 28, pp. 3347–54.10.1557/jmr.2013.358 ↗
25. F. Liu, J.F. Xu, D. Zhang, and Z.Y. Jian: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4810–19.10.1007/s11661-014-2460-5 ↗
26. J.F. Xu, F. Liu, and D. Zhang: J. Mater. Res., 2013, vol. 28, pp. 1891–1902.10.1557/jmr.2013.165 ↗