journal article·2017-02

Solidification of the Undercooled Al-Si Alloy Containing 1.0 PctRE

Bo Dang, Zengyun Jian, Junfeng Xu, Junhui Yan

Publisher page

Abstract

Al-80 pctSi-1.0 pctRE alloy was levitated and melted using the electromagnetic levitation facility in combination with a laser heating unit. The growth morphologies of primary silicon were observed using a high-speed video, and the microstructure was analyzed by the scanning electron microscopy. The morphologies of primary silicon at low, intermediate, and high undercooling are dendrites, fragmented bulks and granular grains, and equiaxed grains, respectively. In addition, the growth velocities of primary silicon were measured, which were consistent with the theoretical prediction. The microstructure refinements of primary silicon played a dominant role in its large microhardness, which increased with the increase of undercooling. Moreover, the hardening effect of dendritic structure was stronger than that of equiaxed grain.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. [1] N. Kang, P. Coddet, C.Y. Chen, Y. Wan, H.L. Liao and C. Coddet: Mater. Design, 2016, vol. 99, pp. 120-26.10.1016/j.matdes.2016.03.053 ↗
2. [2] W. Kasprzaka, H. Kurita, G. Birsana and B.S. Amirkhiz: Mater. Design, 2016, vol. 103, pp. 365-76.10.1016/j.matdes.2016.03.093 ↗
3. [3] T.A. Costa, M. Dias, L.G. Gomes, O.L. Rocha and A. Garcia: J. Alloy. Compd., 2016, vol. 683, 485-94.10.1016/j.jallcom.2016.05.099 ↗
4. [4] R.P. Liu, D.M. Herlach, M. Vandyoussefi and A.L. Greer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 607-12.10.1007/s11661-004-0372-5 ↗
5. [5] V. Metan, K. Eigenfeld, D. Räbiger, M. Leonhardt and S. Eckert: J. Alloy. Compd., 2009, vol. 487, pp. 163-72.10.1016/j.jallcom.2009.08.032 ↗
6. [6] A.Q. Wang, L.J. Zhang and J.P. Xie: J. Rare Earth., 2013, vol. 31, pp. 522-25.10.1016/S1002-0721(12)60313-5 ↗
7. [7] A. Knuutinen, K. Nogita, S.D. McDonald and A.K. Dahle: J. L. M., 2001, vol. 1, pp. 229-40.
8. [8] H.S. Kang, W.Y. Yoon, K.H. Kim, M.H. Kim and Y.P. Yoon: Mat. Sci. Eng. A, 2005, vol. 404, pp. 117-23.10.1016/j.msea.2005.05.041 ↗
9. [9] Y. Ruan and X.Y. Lu: J. Alloy. Compd., 2012, vol. 542, pp. 232-35.10.1016/j.jallcom.2012.07.068 ↗
10. [10] R.P. Liu, T. Volkmann and D.M. Herlach: Acta Mater., 2001, vol. 49, pp. 439-44.10.1016/S1359-6454(00)00330-X ↗
11. [11] X.J. Han, N. Wang and B. Wei: Appl. Phys. Lett., 2002, vol. 81, pp. 778-80.10.1063/1.1492855 ↗
12. [12] T. Aoyama, Y. Takamura and K. Kuribayashi: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1333-39.10.1007/s11661-999-0282-7 ↗
13. [13] T. Aoyama and K. Kuribayashi: Acta Mater., 2000, vol. 48, pp. 3739-44.10.1016/S1359-6454(00)00164-6 ↗
14. [14] S. Binder, P.K. Galenko and D.M. Herlach: J. Appl. Phys., 2014, vol. 115, p. 053511.10.1063/1.4864151 ↗
15. [15] S.B. Luo, W.L.Wang, J. Chang, Z.C. Xia and B. Wei: Acta Mater., 2014, vol. 69, pp. 355-64.10.1016/j.actamat.2013.12.009 ↗
16. [16] C. Panofen and D.M.Herlach: Metall. Mater. Trans. A, 2007, vol. 449-451, pp. 699-703.
17. [17] K.A. Jackson, D.R. Uhlmann and J.D. Hunt: J. Cryst. Growth, 1967, vol. 1, 1-36.10.1016/0022-0248(67)90003-6 ↗
18. [18] Z.Y. Jian, K. Nagashio and K. Kuribayashi: Metall. Mater. Trans. A, 2002, vol. 33, pp. 2947-53.10.1007/s11661-002-0279-y ↗
19. [19] Z.Y. Jian, K. Kuribayashi, W.Q. Jie and F.E. Chang: Acta Mater., 2006, vol. 54, pp. 3227-32.10.1016/j.actamat.2006.03.009 ↗
20. [20] J.F. Xu, L. Diao, J.H. Yan, B. Dang, M. Zhu, F.E. Chang and Z.Y. Jian: J. Mater. Res., 2016, vol. 31, pp. 222-31.10.1557/jmr.2015.401 ↗
21. [21] J. Lipton, W. Kurz and R. Trivedi: Acta Mater., 1987, vol. 35, pp. 957-64.10.1016/0001-6160(87)90174-X ↗
22. [22] W. J. Boettinger, S. R. Coriell and R. Trivedi: in R. Mehrabian and P.A. Parrish, eds., Rapid Solidification Processing: Principles and Technologies, USA, University of California, 1988, pp. 13-25.
23. [23] H.F.C. Robles, M.B. Djurdjevic, W.T. Kierkus and J.H. Sokolowski: Mat. Sci. Eng. A, 2005, vol. 396, pp. 271-76.10.1016/j.msea.2005.01.024 ↗
24. [24] Z.Y. Jian, X.Q. Yang, F.E. Chang and W.Q. Jie: Metall. Mater. Trans. A, 2010, vol. 41, pp. 1826-35.10.1007/s11661-010-0217-3 ↗
25. [25] H.W. Zhang, K. Nakajima, E.G. Wang and J.C. He: T. Nonferr. Metal. Soc., 2012, vol. 22, pp. 1883-96.
26. [26] H. Cheng, F.E. Chang, J.F. Xu, G.Q. Xue and Z.Y. Jian: Optik, 2016, vol. 127, pp. 8379-85.10.1016/j.ijleo.2016.05.082 ↗
27. [27] Y. Ruan, X.J. Wang and S.Y. Chang: Acta Mater., 2015, vol. 91, pp. 183-91.10.1016/j.actamat.2015.03.023 ↗