journal article·2017-02

Effect of Si on the Aging Behavior of Cold-Drawn Pearlitic Steel Wires

Yiyou Tu, Xiaohui Wang, Huiling Huang, Xuefeng Zhou, Jianqing Jiang

Publisher page

Abstract

The effects of Si on the aging behavior in severe cold-drawn pearlitic steel were investigated. Under the same conditions, partitioning ratio, κ Mn, increased from 1.14 to 1.92 in 0.22 pct-Si steel as pearlitic transformation temperature rose from 793 K to 873 K (520 °C to 600 °C); however, κ Mn of 0.95 pct-Si steel only increased from 1.87 to 1.94. Cementite lamellae spheroidization in high Si content steel wire was remarkably delayed during aging at 698 K (425 °C) by the combined effect of diffusion retardation of Si and C atom and cementite phase stabilization by Mn alloying. In addition, age-hardening duration is prolonged, thereby extending age-hardening duration of the as-drawn 0.95 pct-Si-873 K (600 °C) steel wire by approximately 10 times that of 0.22 pct-Si-793 K (520 °C) steel wire.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. K. Makii, H. Yaguchi, M. Kaiso, N. Ibaraki, Y. Miyamoto and Y. Oki, Scripta Mater. 1997, vol. 37, pp. 1753–59.10.1016/S1359-6462(97)00326-6 ↗
2. F. Fang, X.-J. Hu, S.-H. Chen, Z.-H. Xie and J.-Q. Jiang, Mater. Sci. Eng. A 2012, vol. 547, pp. 51–54.10.1016/j.msea.2012.03.075 ↗
3. DB Park, JW Lee, YS Lee, KT Park and WJ Nam, Met. Mater. Int. 2008, vol. 14, pp. 59–64.10.3365/met.mat.2008.02.059 ↗
4. J Languillaume, G Kapelski and B Baudelet, Acta Mater. 1997, vol. 45, pp. 1201–12.10.1016/S1359-6454(96)00216-9 ↗
5. T. Tarui, N. Maruyama, J. Takahashi, S. Nishida, and H. Tashiro: Shinnittetsu Giho 2004, pp. 51–56.
6. M. Nagao and T. Kuroda, Tetsu To Hagane-J. Iron Steel Inst. Jpn. 2004, vol. 90, pp. 56–60.
7. Y. Shiota, Y. Tomota, A. Moriai and T. Kamiyama, Met. Mater. Int. 2005, vol. 11, pp. 371–76.10.1007/BF03027507 ↗
8. S. W. Joung, U. G. Kang, S. P. Hong, Y. W. Kim and W. J. Nam, Mater. Sci. Eng. A 2013, vol. 586, pp. 171–77.10.1016/j.msea.2013.07.095 ↗
9. YJ Li, P Choi, S Goto, C Borchers, D Raabe and R Kirchheim, Acta Mater. 2012, vol. 60, pp. 4005–16.10.1016/j.actamat.2012.03.006 ↗
10. Y. J. Li, A. Kostka, P. Choi, S. Goto, D. Ponge, R. Kirchheim and D. Raabe, Acta Mater. 2015, vol. 84, pp. 110–23.10.1016/j.actamat.2014.10.027 ↗
11. G. A. Nematollahi, B. Grabowski, D. Raabe and J. Neugebauer, Acta Mater. 2016, vol. 111, pp. 321–34.10.1016/j.actamat.2016.03.052 ↗
12. Y. Z. Chen, G. Csiszar, J. Cizek, X. H. Shi, C. Borchers, Y. J. Li, F. Liu and R. Kirchheim, Metall. Mater. Trans. A 2016, vol. 47A, pp. 726–38.10.1007/s11661-015-3263-z ↗
13. M. Herbig, D. Raabe, Y. J Li, P. Choi, S. Zaefferer and S. Goto, Phys. Rev. Lett. 2014, vol. 112, p. 126103.10.1103/PhysRevLett.112.126103 ↗
14. M. Herbig, P. Choi and D. Raabe, Ultramicroscopy 2015, vol. 153, pp. 32–39.10.1016/j.ultramic.2015.02.003 ↗
15. D. B. Park and W. J. Nam: in Mechanical Behavior of Materials X, Pts 1 and 2, S.W. Nam, Y.W. Chang, S.B. Lee and N.J. Kim, eds., Trans Tech Publications Ltd: Stafa-Zurich, 2007, pp 65–68.
16. S.K. Tewari and R.C. Sharma, Metall. Trans. A. 1985, vol. 16, pp. 597–603.10.1007/BF02814233 ↗
17. Y. Y. Tu, Z. G. Mao, Q. Zhang, X. F. Zhou, F. Fang and J. Q. Jiang, Mater. Lett. 2014, vol. 134, pp. 84-86.10.1016/j.matlet.2014.07.057 ↗
18. YJ Li, P Choi, C Borchers, S Westerkamp, S Goto, D Raabe and R Kirchheim, Acta Mater. 2011, vol. 59, pp. 3965–77.10.1016/j.actamat.2011.03.022 ↗
19. VN Gridnev, VG Gavrilyuk, IY Dekhtyar, Yu Meshkov, PS Nizin and VG Prokopenko, Phys. Status Solidi (A) 1972, vol. 14, pp. 689–94.10.1002/pssa.2210140238 ↗
20. F Danoix, D Julien, X Sauvage and J Copreaux, Mater. Sci. Eng.A. 1998, vol. 250, pp. 8-13.10.1016/S0921-5093(98)00529-2 ↗
21. X Sauvage, J Copreaux, F Danoix and D Blavette, Philos. Mag. A 2000, vol. 80, pp. 781–96.10.1080/01418610008212082 ↗
22. MH Hong, WT Reynolds, T Tarui and K Hono, Metall. Mater. Trans. A 1999, vol. 30, pp. 717–27.10.1007/s11661-999-1003-y ↗
23. YJ Li, P Choi, S Goto, C Borchers, D Raabe and R Kirchheim, Ultramicroscopy 2013, vol. 132, pp. 233–38.10.1016/j.ultramic.2012.10.010 ↗
24. Y. Y. Tu, L. H. Huang, X. H. Wang, X. F. Zhou, F. Fang and J. Q. Jiang, Metall. Mater. Trans. A 2016, vol. 47A, pp. 254–59.10.1007/s11661-015-3219-3 ↗
25. L. Zhou, F. Fang, X. Zhou, Y. Tu, Z. Xie and J. Jiang, Scripta Mater. 2016, vol. 120, pp. 5–8.10.1016/j.scriptamat.2016.04.002 ↗
26. F. Fang, Y. Zhao, P. Liu, L. Zhou, X.-J. Hu, X. Zhou and Z.-H. Xie, Mater. Sci. Eng. A 2014, vol. 608, pp. 11–15.10.1016/j.msea.2014.04.050 ↗
27. P. Watté, J. Van Humbeeck, E. Aernoudt and I. Lefever, Scripta Mater. 1996, vol. 34, pp. 89–95.10.1016/1359-6462(95)00479-3 ↗
28. K. Hono, M. Ohnuma, M. Murayama, S. Nishida, A. Yoshie and T. Takahashi, Scripta Mater. 2001, vol. 44, pp. 977–83.10.1016/S1359-6462(00)00690-4 ↗
29. L. Huang, Y. Tu, X. Wang, X. Zhou, F. Fang and J. Jiang, Physica Status Solidi (b) 2016, vol. 253, pp. 1623–28.10.1002/pssb.201552675 ↗
30. G Miyamoto, JC Oh, K Hono, T Furuhara and T Maki, Acta Mater. 2007, vol. 55, pp. 5027–38.10.1016/j.actamat.2007.05.023 ↗
31. G. Miyamoto, H. Usuki, Z. D. Li and T. Furuhara, Acta Materialia 2010, vol. 58, pp. 4492–502.10.1016/j.actamat.2010.04.045 ↗