journal article·2016-11Open access

Numerical Simulation of Solidification, Homogenization, and Precipitation in an Industrial Ni-Based Superalloy

Luc Rougier, Alain Jacot, Charles-André Gandin, Damien Ponsen, Virginie Jaquet

Abstract

A comprehensive simulation approach integrating solidification, homogenization, and precipitation during aging has been used to predict the formation of γ/γ′ microstructures in the AM1 nickel-based superalloy. The particle size distribution of intradendritic γ′ precipitates after aging was calculated with a multicomponent diffusion model coupled with CALPHAD thermodynamics for the equilibrium at the interface. The influence of residual microsegregation after homogenization and quenching was analyzed through different initial conditions obtained from calculations of the concentration profiles in the primary γ dendritic microstructure during solidification and the homogenization heat treatment. While the global sequence of precipitation remains qualitatively the same, substantial differences in the final volume fraction of γ′ precipitates were predicted between the core and the periphery of a former dendrite arm, for typical homogenization and aging conditions. To demonstrate the relevance of the developed simulation approach, the model was also used to investigate modified precipitation heat treatments. The simulations showed that relatively short heat treatments based on slow continuous cooling could potentially replace the extended isothermal heat treatments which are commonly used. Slow continuous cooling conditions can lead to similar γ′ precipitates radii and volume fractions, the main differences with isothermal heat treatments lying in a narrower particle size distribution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. R. C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge UK, 2006.10.1017/CBO9780511541285 ↗
2. J. A. Dantzig and M. Rappaz: Solidification, CRC Press, Taylor & Francis Group, Boca Raton, 2009.10.1201/9781439808030 ↗
3. C. E. Campbell, W. J. Boettinger and U. R. Kattner: Acta Materialia, 2002, vol. 50, pp. 775-792.10.1016/S1359-6454(01)00383-4 ↗
4. N. Warnken, D. Ma, A. Drevermann, R. C. Reed, S. G. Fries, and I. Steinbach: Acta Materialia, 2009, vol. 57, pp. 5862-5875.10.1016/j.actamat.2009.08.013 ↗
5. N. Warnken: Journal of Phase Equilibria and Diffusion, 2016, vol. 37, pp. 100-107.10.1007/s11669-015-0445-8 ↗
6. C. Walter, B. Hallstedt, and N. Warnken: Materials Science and Engineering A, 2005, vol. 397, pp. 385-390.10.1016/j.msea.2005.02.056 ↗
7. Ch.-A. Gandin and A. Jacot: Acta Mater., 2007, vol. 55, pp. 2539–53.10.1016/j.actamat.2006.11.047 ↗
8. A. Jacot and M. Rappaz: Acta Materialia, 2002, vol. 50, pp. 1909-1926.10.1016/S1359-6454(01)00442-6 ↗
9. Q. Du and A. Jacot: Acta Materialia, 2005, vol. 53, pp. 3479-3493.10.1016/j.actamat.2005.04.004 ↗
10. H. Combeau, J. Lacaze: J. De Phys., 1993, vol. Iv 3, pp. 1157–62.
11. H.T. Pang, N. D’souza, H. Dong, H.J. Stone, and C.M.F. Rae: Metall. Mater. Trans. A, 2016, vol. 47, pp. 889-906.10.1007/s11661-015-3252-2 ↗
12. A. Szczotok and B. Chmiela: Journal of Materials Engineering and Performance, 2014, vol. 23, pp. 2739-2747.10.1007/s11665-013-0843-1 ↗
13. Fu Wang, Dexin Ma, Samuel Bogner, and Andreas Bührig-Polaczek: Metallurgical and Materials Transactions A, vol. 47, 2016, 2376-2386.10.1007/s11661-016-3415-9 ↗
14. J.S. Langer and A.J. Schwartz: Physical Review A, 1980, vol. 21, pp. 948-958.10.1103/PhysRevA.21.948 ↗
15. I. M. Lifshitz and V. V. Slyozov: Journal of Physics and Chemistry of Solids, 1961, vol.19, pp. 35-50.10.1016/0022-3697(61)90054-3 ↗
16. C. Wagner: Zeitschrift für Elektrochemie, 1961, vol. 65, pp. 581-591.
17. R. Kampmann and R. Wagner: in P. Haasen, V. Gerold, R. Wagner and F. Ashby Michael (Eds.): Decomposition of Alloys: The Early Stages. Pergamon Press, Sonnenberg, D, 1984, pp. 91–103.10.1016/B978-0-08-031651-2.50018-5 ↗
18. M. Perez, M. Dumont and D. Acevedo-Reyes: Acta Materialia, 2008, vol. 56, pp. 2119-2132.10.1016/j.actamat.2007.12.050 ↗
19. P. Maugis and M. Gouné: Acta Materialia, 2005, vol. 53, pp. 3359-3367.10.1016/j.actamat.2005.03.036 ↗
20. J. Svoboda, F. D. Fischer, P. Fratzl and E. Kozeschnik: Materials Science and Engineering A, 2004, vol. 385, pp. 166-174.
21. E. Kozeschnik, J. Svoboda, P. Fratzl, F. D. Fischer: Materials Science and Engineering A, 2004, vol. 385, pp.157-165.
22. L. Rougier, A. Jacot, Ch.-A. Gandin, P. Di Napoli, P.-Y. Théry, D. Ponsen and V. Jaquet: Acta materialia, 2013, vol. 61, pp. 6396-6405.10.1016/j.actamat.2013.07.018 ↗
23. L. Rougier, A. Jacot, Ch.-A. Gandin, D. Ponsen and V. Jaquet: MATEC Web of Conferences, 2014, vol. 14, 11003.10.1051/matecconf/20141411003 ↗
24. Q. Chen, J. Jeppsson, J. Agren: Acta Materialia, 2008, vol. 56, pp.1890-1896.10.1016/j.actamat.2007.12.037 ↗
25. C. Booth-Morrison, J. Weninger, C. K. Sudbrack, Z. Mao, R. D. Noebe and D. N. Seidman: Acta Materialia, 2008, vol. 56, pp. 3422-3438.10.1016/j.actamat.2008.03.016 ↗
26. H. Aaron, D. Fainstein and G. Kotler: Journal of Applied Physics, 1970, vol. 41, pp. 4404-4410.10.1063/1.1658474 ↗
27. G. Guillemot and Ch.-A. Gandin: Acta Mater., 2015, vol. 97, pp. 419–34.10.1016/j.actamat.2015.04.030 ↗
28. Ch.-A. Gandin, Y. Bréchet, M. Rappaz, G. Canova, M. Ashby and H. Shercliff: Acta Mater., 2002, vol. 50, pp. 901–27.10.1016/S1359-6454(01)00376-7 ↗
29. Ni20: Ni Base Alloys Database, Thermo-Calc Software AB, 2010.
30. MobNi2: TCS Ni-alloys Mobility Database v2.0, Thermo-Calc Software AB, 2011.
31. J. A. Marqusee and J. Ross: The Journal of Chemical Physics, 1984, vol 80, pp. 536-543.10.1063/1.446427 ↗
32. B.C. Wilson, E.R. Cutler and G.E. Fuchs: Mat. Sci. Eng. A, 2008, vol 479, pp. 356-364.10.1016/j.msea.2007.07.030 ↗
33. H. Ben Hamouda: Modélisation et simulation de la structure de solidification dans les superalliages base-nickel: application AM1, PhD Thesis, MINES ParisTech, Sophia-Antipolis, France, 2012.
34. A. L. Dons, L. Pedersen and L. Arnberg: Materials Science and Engineering A, 1999, vol. 271, pp. 91-94.10.1016/S0921-5093(99)00273-7 ↗
35. C. Peyroutou and R. Tintiller : Report « Précipitation et évolution de la phase gamma prime dans l’AM1: effet du temps et de la température », SNECMA, Gennevilliers, France, 1993.
36. X. Li, N. Saunders, A. Miodownik, Met. and Mat. Trans. A, 2002, vol. 33, pp. 3367- 3373.10.1007/s11661-002-0325-9 ↗
37. T. Grosdidier, A. Hazotte and A. Simon: Materials Science and Engineering A, 1998, vol. 256, pp. 183-196.10.1016/S0921-5093(98)00795-3 ↗
38. C. Mons: M1165, Techniques de l’ingénieur, Saint-Denis, France, (1996).
39. L. Rougier: Simulation de la formation des microstructures dans les superalliages à base de nickel de type AM1 durant la solidification et les traitements thermiques, PhD Thesis, EPFL, Switzerland (2013).