journal article·2016-11

Influence of Cycle Temperature on the Wear Resistance of Vermicular Iron Derivatized with Bionic Surfaces

Qi Sui, Peng Zhang, Hong Zhou, Yan Liu, Luquan Ren

Publisher page

Abstract

Depending on their applications, such as in brake discs, camshafts, etc., the wear behavior of vermicular iron is influenced by the thermal cycling regime. The failure of a working part during its service life is a consequence of both thermal fatigue and wear. Previously, the wear and thermal fatigue resistance properties of vermicular iron were separately investigated by researchers, rather than a study combining these two factors. In the present work, the effect of cycle temperature on the wear resistance of specimens with bionic units processed by laser has been investigated experimentally. The wear behavior pre- and post-thermal cycling has also been investigated, and the influence of different cycle temperatures on the wear resistance is discussed. The results indicate that the thermal cycling regime brought about negative influences with varying degrees, on the material properties, such as the microstructures, micro-hardness, cracks, and oxidation resistance properties. All these factors synergistically reduced the wear resistance of vermicular iron. In particular, the negative influence apparently increased with an increase in cycle temperature. Nevertheless, the post-thermal-cycle wear resistance of the specimens with bionic units was superior to those without bionic units. Hence, the laser bionic process is an effective way to improve the performance of vermicular iron in combined thermal cycling and wear service conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Brake Systems and Friction Analysis · Tribology and Wear Analysis · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. K. Hirasata, K. Hayashi, and Y. Inamoto: Wear, 2007, vol. 263, pp. 790-800.10.1016/j.wear.2007.01.057 ↗
2. M. Hatate, T. Shiota, N. Takahashi, and K. Shimizu: Wear, 2001, vol. 251, pp. 885-9.10.1016/S0043-1648(01)00746-3 ↗
3. Y. Lejeail and N. Kasahara: Int. J. Fatigue, 2005, vol. 27, pp. 768-72.10.1016/j.ijfatigue.2005.01.007 ↗
4. M. Naji and M. Al-Nimr: Int. Commun. Heat Mass Tranf., 2001, vol. 28, pp. 835-45.10.1016/S0735-1933(01)00287-1 ↗
5. O. Maluf, M. Angeloni, D.B.V. Castro, W.W. Bose Filho, D. Spinelli, and C.O.F.T. Ruckert: J. Mater. Eng. Perform., 2009, vol. 18, pp. 980-84.10.1007/s11665-008-9326-1 ↗
6. K.R. Ziegler and J.F. Wallace: Trans. Amer. Foundrymen’s Soc., 1984, vol. 92, pp. 735-48.
7. Z. Jing, H. Zhou, P. Zhang, C. Wang, C. Meng, and D. Cong: Appl. Surf. Sci., 2013, vol. 271, pp. 329-36.10.1016/j.apsusc.2013.01.193 ↗
8. T.J. Mackin, S.C. Noe, K.J. Ball, B.C. Bedell, D.P. Bim-Merle, M.C. Bingaman, D.M. Bomleny, G.J. Chemlir, D.B. Clayton, and H.A. Evans: Eng. Fail. Anal., 2002, vol. 9, pp. 63-76.10.1016/S1350-6307(00)00037-6 ↗
9. W.S. Dai, M. Ma, and J.H. Chen: Mater. Sci. Eng.: A, 2007, vol. 448, pp. 25-32.10.1016/j.msea.2006.09.003 ↗
10. X. Tong, H. Zhou, L.-Q. Ren, Z.-H. Zhang, W. Zhang, and R.-D Cui: Int. J. Fatigue, 2009, vol. 31, pp. 668–77.10.1016/j.ijfatigue.2008.03.023 ↗
11. H. Fredriksson, P.-A. Sunnerkrantz, and P. Ljubinković: Mater. Sci. Technol., 1988, vol. 4, pp. 222-26.10.1179/mst.1988.4.3.222 ↗
12. S.Y. Buni, N. Raman, and S. Seshan: Sadhana, 2004, vol. 29, pp. 117-27.10.1007/BF02707004 ↗
13. H. Zhou, N. Sun, H. Shan, D. Ma, X. Tong, and L. Ren: Appl. Surf. Sci., 2007, vol. 253, pp. 9513-20.10.1016/j.apsusc.2007.06.014 ↗
14. G. Cueva, A. Sinatora, W.L. Guesser, and A.P. Tschiptschin: Wear, 2003, vol. 255, pp. 1256-60.10.1016/S0043-1648(03)00146-7 ↗
15. H. Zhou, P. Zhang, Z. Zhang, W. Qiu, Y. Liu, and L. Ren: J. Bionic Eng., 2014, vol. 11, pp. 288-95.10.1016/S1672-6529(14)60031-7 ↗
16. Q. Song and L. Shen: Scripta Mater, 1997, vol. 36, pp. 531–34.10.1016/S1359-6462(96)00417-4 ↗
17. J. Lawrence and L. Li: Surf. Coat. Technol., 2001, vol. 140, pp. 238-43.10.1016/S0257-8972(01)01039-8 ↗
18. L. Zbroniec, T. Sasaki, and N. Koshizaki: Scripta Mater., 2001, vol. 44, pp. 1869-72.10.1016/S1359-6462(01)00735-7 ↗
19. Q. Song and L. Shen: Scripta Mater., 1997, vol. 36, pp. 531-4.10.1016/S1359-6462(96)00417-4 ↗
20. P.A. Kobryn, E.H. Moore, and S.L. Semiatin: Scripta Mater., 2000, vol. 43, pp. 299-305.10.1016/S1359-6462(00)00408-5 ↗
21. Y. Liu, H. Zhou, H. Su, C. Yang, J. Cheng, and P. Zhang: Mater. Des., 2012, 39, pp. 344-9.10.1016/j.matdes.2012.02.060 ↗
22. R.C. Hugo, H. Kung, J.R. Weertman, R. Mitra, J.A. Knapp, and D.M. Follstaedt: Acta Mater., 2003, vol. 51, pp. 1937-43.10.1016/S1359-6454(02)00599-2 ↗
23. J. Zhang, J. Hua and Z. Wang: Foundry Tech, 1998, vol. 8, pp. 47–50.