journal article·2016-10

Correlation Between Interfacial Structure and Toughness in SiC-Al Bilayers

Yaru Kong, Qiang Guo, Xiaolei Guo, Genlian Fan, Zhiqiang Li, Ding-Bang Xiong, Yishi Su, Jie Zhang, Di Zhang

Publisher page

Abstract

Reinforcement surface modification is often used to improve the mechanical properties of particle-reinforced metal matrix composites, however, the extent to which such modifications affect the interfacial properties is yet to be revealed. In this study, we fabricated SiC-Al composite bilayers where the SiC underwent different surface treatments before Al deposition. Four-point bending tests showed that the samples made from acid-pickled and thermally oxidized SiC possessed substantially higher interfacial toughness than their untreated counterpart, a presumption inferred from mechanical tests on bulk SiCp-Al composites but never justified quantitatively. These findings were rationalized by the different interfacial constituents and structure in these samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. [1] N. Chawla and Y. L. Shen, Adv. Eng. Mater., 2001, vol. 3, pp. 357-370.10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
2. [2] S.J. YS Suh and KT Ramesh, Acta Mater., 2009, vol. 57, pp. 5848-5861.10.1016/j.actamat.2009.08.010 ↗
3. [3] J.W.J.N. Chawla, C. Andres and J.E. Allison, Metall. Mater. Trans. A, 1998, vol. 29, pp. 2843-2854.10.1007/s11661-998-0325-5 ↗
4. [4] Z.Q.Li, X.Z. Kai, G.L. Fan, Q. Guo, D.B. Xiong, W.L. Zhang, Y.S. Su, W.J. Lu, W.J. Moon and D. Zhang, Mat. Sci. Eng. A, 2013, vol. 587, pp. 46-53.
5. E.K. Tamer Ozben and O. Çakır: J. Mater. Process. Tech., 2008, vol. 198, pp. 220–25.10.1016/j.jmatprotec.2007.06.082 ↗
6. A.V. K. K. Ajith Kumar, T. P. D. Rajan, U. T. S. Pillai and B. C. Pai: Acta Metall. Sin Eng. L., 2014, vol. 27, pp. 295–305.10.1007/s40195-014-0045-3 ↗
7. [7] J. Romero, L. Wang and R. Arsenault, Mat. Sci. Eng. A, 1996, vol. 212, pp. 1-5.10.1016/0921-5093(96)10168-4 ↗
8. [8] A. Urena, E. Martınez, P. Rodrigo and L. Gil, Compos. Sci. Technol., 2004, vol. 64, pp. 1843-1854.10.1016/j.compscitech.2004.01.010 ↗
9. [9] J.W. Liu, Z.X. Zheng, J.M. Wang, Y.C. Wu, W.M. Tang and J. Lü, J. Alloy. Compd., 2008, vol. 465, pp. 239-243.10.1016/j.jallcom.2007.10.055 ↗
10. [10] N. Cheng, C. Li, Q. Hui and Z. Chen, Mat. Sci. Eng. A, 2009, vol. 517, pp. 249-256.10.1016/j.msea.2009.04.005 ↗
11. [11] D.L.Yang, L.J. Zhang, F. Qiu, J.G. Wang and Q.C. Jiang, Mat. Sci. Eng. A, 2015, vol. 624, pp. 102-109.10.1016/j.msea.2014.11.066 ↗
12. [12] Y. Su, Q. Ouyang, W. Zhang, Z. Li, Q. Guo, G. Fan and D. Zhang, Mat. Sci. Eng. A, 2014, vol. 597, pp. 359-369.10.1016/j.msea.2014.01.024 ↗
13. [13] Y.S. Suh, S.P. Joshi and K.T. Ramesh, Acta Mater., 2009, vol. 57, pp. 5848-5861.10.1016/j.actamat.2009.08.010 ↗
14. [14] Y.H. Teng and J.D. Boyd, Composites, 1994, vol. 25, pp. 906-912.10.1016/0010-4361(94)90105-8 ↗
15. [15] P. Charalambides, J. Lund, A. Evans and R. McMeeking, J. Appl. Mech., 1989, vol. 56, pp. 77-82.10.1115/1.3176069 ↗
16. [16] X. Sun and B.D. Davidson, Engi. Fract. Mech., 2006, vol. 73, pp. 1343-1361.10.1016/j.engfracmech.2005.11.007 ↗
17. [17] X.L. Guo, Q. Guo, Z. Li, G. Fan, D.-B. Xiong, Y. Su, J. Zhang, C.L. Gan and D. Zhang, Scripta Mater., 2016, vol. 114, pp. 56-59.10.1016/j.scriptamat.2015.11.018 ↗
18. [18] A.B.H. Nick G. Wright and K. Vassilevski, Mater. Today, 2008, vol. 11, pp. 16-21.
19. [19] M.J. Mehl, Phys. Rev. B, 1993, vol. 47, pp. 2493-2500.10.1103/PhysRevB.47.2493 ↗
20. [20] M. Yuan, Y. Yang, C. Li, P. Heng and L. Li, Mater. Design, 2012, vol. 38, pp. 1-6.10.1016/j.matdes.2011.12.043 ↗
21. [21] J. Hoekstra and M. Kohyama, Phys. Rev. B, 1998, vol. 57, p. 2334.10.1103/PhysRevB.57.2334 ↗
22. [22] M.P. Hughey, D.J. Morris, R.F. Cook, S.P. Bozeman, B.L. Kelly, S.L. Chakravarty, D.P. Harkens and L.C. Stearns, Eng. Fract. Mech., 2004, vol. 71, pp. 245-261.10.1016/S0013-7944(03)00100-0 ↗
23. [23] A. Bagchi and A.G. Evans, Thin Solid Films, 1996, vol. 286, pp. 203-212.10.1016/S0040-6090(96)08551-3 ↗
24. [24] T.S. Oh, J. Rödel, R.M. Cannon and R.O. Ritchie, Acta metall., 1988, vol. 36, pp. 2083-2093.10.1016/0001-6160(88)90310-0 ↗
25. [25] S. Qin, C. Chen, G. Zhang, W. Wang and Z. Wang, Mat. Sci. Eng. A, 1999, vol. 272, pp. 363-370.10.1016/S0921-5093(99)00503-1 ↗