journal article·2016-03Open access

β-Ti Grain Refinement Via α-Precipitation

Alireza Ghaderi, Peter D. Hodgson, Matthew R. Barnett

Abstract

The present work explores the impact of α precipitates on β recrystallization following hot deformation of Ti-5Al-5Mo-5V-3Cr with grains larger than 1 mm. A single hot rolling pass of 36 pct reduction was conducted on an aged microstructure containing α precipitates at a temperature well below the β transus temperature. After annealing, a uniformly recrystallized structure with a grain size of ~100 µm is formed. The prior β grain boundaries can be readily identified and it is seen that the primary β grains have been replaced by grains displaying a spread of correlated misorientation angles extending up to the highest allowable values. The annealing comprises two stages. The first stage involves normal β subgrain growth limited by the Zener pinning force of the unstable α precipitates. The second stage corresponds to the onset of β recrystallization at the point where the Zener pinning force drops due to dissolution of the α precipitates. This leads to a uniform distribution of site saturated recrystallization nuclei.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. R.R. Boyer, and R.D. Briggs: J. Mater. Eng. Perform., 2005, vol. 14, pp. 681-685.10.1361/105994905X75448 ↗
2. G. Lütjering and J.C. Williams: Titanium. Engineering Materials and Processes, 2nd ed, Springer, New York, 2007.
3. M.J Donachie: Titanium, A technical Guide, 2nd ed, ASM International, 2007.
4. I. Weiss and S.L. Semiatin: Mater. Sci. Eng. A, 1998, vol. 243, pp. 46-65.10.1016/S0921-5093(97)00783-1 ↗
5. Y. Kawabe and S. Muneki: Beta Titanium Alloys in the 1990’s, TMS, Warrendale, 1993.
6. K. Le Biavant, S. Pommier, and C. Prioul: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 527-545.10.1046/j.1460-2695.2002.00480.x ↗
7. F. Bridier, P. Villechaise, and J. Mendez: Acta Mater., 2008, vol. 56, pp. 3951-3962.10.1016/j.actamat.2008.04.036 ↗
8. A.P. Woodfield, M.D. Gorman, R.R. Corderman, I.A. Sutliff, and B. Yamrom: Titanium ‘95 Science and Technology, Proceedings of the Eighth World Conference on Titanium 1995, The Institute of Materials, Birmingham, 1996.
9. L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi, and P. Bocher: Acta Mater., 2008, vol. 56, pp. 4298-4308.10.1016/j.actamat.2008.04.065 ↗
10. D.G. Leo Prakash, P. Honniball, D. Rugg, P.J. Withers, J. Quinta da Fonseca, and M. Preuss: Acta Mater., 2013, vol. 61, pp. 3200-3213.10.1016/j.actamat.2013.02.008 ↗
11. S.L. Semiatin, S.V. Seetharaman, and I. Weiss: JOM, 1997, vol. 49, pp. 33-39.10.1007/BF02914711 ↗
12. H.M. Flower: Mater. Sci. Tech., 1990, vol. 6, pp. 1082-1092.10.1179/mst.1990.6.11.1082 ↗
13. D. Banerjee, A. Pilchak, and J.C. Williams: Mater. Sci. Forum, 2012, vol. 710, pp. 66-84.10.4028/www.scientific.net/MSF.710.66 ↗
14. D. Banerjee, and J.C. Williams: Acta Mater, 2013, vol. 61, pp. 844-879.10.1016/j.actamat.2012.10.043 ↗
15. T. Furuhara, Y. Toji, H. Abe, and T. Maki: Mater. Sci. Forum, 2003, vol. 426-432, pp. 655-660.10.4028/www.scientific.net/MSF.426-432.655 ↗
16. F. Montheillet, D. Dajno, N. Come, E. Gautier, A. Simon, P. Audrerie, A.-M. Chaze, and C. Levaillant: Titanium ‘92: Science and Technology, TMS, Warrendale, 1992.
17. T. Furuhara, B. Poorganji, H. Abe, and T. Maki: JOM, 2007, vol. 59, pp. 64-67.10.1007/s11837-007-0013-8 ↗
18. V.V. Tetyukhin, I.V. Levin, and N.I. Levina: US Patent, No. US 2013/0233455 A1, 12 Sept. 2013.
19. F.J. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, 2nd ed, Elsevier Science, New York, 2004.
20. J.C. Fanning: J. Mater. Eng. Perform., 2005, vol. 14, pp. 788-791.10.1361/105994905X75628 ↗
21. S.L. Nyakana, J.C. Fanning, and R.R. Boyer: J. Mater. Eng. Perform., 2005, vol. 14, pp. 799-811.10.1361/105994905X75646 ↗
22. N.G. Jones, R.J. Dashwood, D. Dye, and M. Jackson: Mater. Sci. Eng. A, 2008, vol. 490, pp. 369-377.10.1016/j.msea.2008.01.055 ↗
23. M.G. Glavicic, P.A. Kobryn, F. Spadafora, and S.L. Semiatin: Mat. Sci. Eng. A, 2003, vol. 346, pp. 8-18.10.1016/S0921-5093(02)00525-7 ↗
24. M. Harper, R. Williams, G.B. Viswanathan, J. Tiley, R. Banerjee, D.J. Evans, and H.L. Fraser: Ti-2003, Science and Technology: Proceedings of the 10th World Conference on Titanium, Wiley-VCH, Hamburg, 2004.
25. S.K. Kar, A. Ghosh, N. Fulzele, and A. Bhattacharjee: Mater. Charact., 2013, vol. 81, pp. 37-48.10.1016/j.matchar.2013.03.016 ↗
26. S. Nag, R. Banerjee, R. Srinivasan, J.Y. Hwang, M. Harper, and H.L. Fraser, Acta Mater., 2009, vol. 57, pp. 2136-2147.10.1016/j.actamat.2009.01.007 ↗
27. E.E. Underwood: J. Microsc., 1969, vol. 89, no. 2, pp. 161-180.10.1111/j.1365-2818.1969.tb00663.x ↗
28. M. Dikovits, C. Poletti, and F. Warchomicka: Metall. Mater. Trans. A, 2013, vol. 45, pp. 1586-1596.10.1007/s11661-013-2073-4 ↗
29. I. Weiss, F.H. Froes, and D. Eylon: Metall. Trans., 1984, vol. 15, pp. 1493-1496.10.1007/BF02648580 ↗
30. J.K. Mackenzie: Biometrika, 1958, vol. 45, pp. 229-240.10.1093/biomet/45.1-2.229 ↗
31. S. Kobayashi and S. Zaefferer: Intermetallics, 2006, vol. 14, pp. 1252-1256.10.1016/j.intermet.2005.11.034 ↗
32. P.A. Manohar, M. Ferry, and T. Chandra: ISIJ Int., 1998, vol. 38, pp. 913-924.10.2355/isijinternational.38.913 ↗
33. B.R. Patterson and Y. Liu: Metall. Trans. A, 1992, vol. 23, pp. 2481-2482.10.1007/BF02658051 ↗
34. R.T. DeHoff and F.N. Rhines: Trans. TMS-AIME, 1961, vol. 221, pp. 975-982.
35. N. Ryum, O. Hunderi, and E. Nes: Scr. Metall., 1983, vol. 17, pp. 1281-1283.10.1016/0036-9748(83)90216-8 ↗
36. F.J. Humphreys: Acta Mater., 1997, vol. 45, pp. 4231-4240.10.1016/S1359-6454(97)00070-0 ↗
37. F.J. Humphreys: Acta Mater., 1997, vol. 45, pp. 5031-5039.10.1016/S1359-6454(97)00173-0 ↗
38. D. Dunst, R. Dendievel, and H. Mecking: Mater. Sci. Forum, 1994, vol. 157-162, pp. 665-672.10.4028/www.scientific.net/MSF.157-162.665 ↗