Intergranular Cracking Susceptibility of 2.25Cr Heat-Resistant Steels Depending on Alloying Elements and Impurities
Source abstract
Abstract
The intergranular cracking susceptibility of 2.25Cr heat-resistant steels increases with increasing bulk phosphorus content. This is due to the increase in phosphorus segregation concentration of prior austenite grain boundaries (PAGBs) and the prior austenite grain boundary/carbide interfaces (GCIs) with increasing bulk phosphorus content. Moreover, the susceptibility is higher in tungsten-added steels than the molybdenum-added steel. This is attributed to the higher driving force for carbide formation of tungsten which causes more active carbide formation in the tungsten-added steel, the consequent absence of the repulsive segregation between carbon and phosphorus, and the final higher phosphorus segregation concentration at the PAGBs and the GCIs. Additionally, the absence of sulfur segregation at the PAGBs and the GCIs of the molybdenum-added steel, which arises from the repulsive segregation between carbon and sulfur, acts as an additional factor which lowers the intergranular cracking susceptibility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Material Properties and Failure Mechanisms · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. W. Bendick, J. Gabrel, B. Hahn, B. Vandenberghe: Int. J. Pres. Ves. Pip, 2007, vol. 84, pp. 13-20.10.1016/j.ijpvp.2006.09.002 ↗
2. J.C. Vaillant, B. Vandenberghe, B. Hahn, H. Heuser, C. Jochum: Int. J. Pres. Ves. Pip, 2008, vol. 85, pp. 38-46.10.1016/j.ijpvp.2007.06.011 ↗
3. F. Abe, T.U. Kern, R. Viswanathan: Creep resistant steels, Woodhead Publishing Ltd, Cambridge, UK, 2008.10.1533/9781845694012 ↗
4. A. Dhooge, J. Vekeman: Weld. World, 2005, vol. 49, pp. 75-93.10.1007/BF03266492 ↗
5. Y.J. Jin, H. Lu, C. Yu, J.J. Xu: Mater. Charac, 2013, vol. 84, pp. 216-224.10.1016/j.matchar.2013.08.004 ↗
6. J.G. Nawrocki, J.N. Dupont, C.V. Robino, A.R. Marder: Weld J, 2000, vol. 79, pp. 355-362.
7. J.G. Nawrocki, J.N. Dupont, C.V. Robino, J.D. Puskar, A.R. Marder: Weld J. 2003, vol. 82, pp. 25-35.
8. N. Bailey: Weldability of ferritic steels, Abington Publishing, Cambridge, UK, 1994.10.1533/9781845698935 ↗
9. J.P. Balaguer, Z. Wang, E.F. Nippes: Welding J. 1989, vol. 68, pp. 121–31.
10. C.A. Hippsley, J.F. Knott, B.C. Edwards: Acta Metall. 1980, vol. 28, pp. 869–85.10.1016/0001-6160(80)90104-2 ↗
11. R. Raj, M.F. Ashby: Acta Metall. 1975, vol. 23, pp. 653–66.10.1016/0001-6160(75)90047-4 ↗
12. T.J. Chuang, K.I. Kagawa, J.R. Rice, L.B. Sills: Acta Metall, 1979, vol. 27, pp. 265–84.10.1016/0001-6160(79)90021-X ↗
13. J. Shin, C.J. McMahon Jr: Acta Metall, 1984, vol. 32, pp. 1535–52.10.1016/0001-6160(84)90100-7 ↗
14. D. Bika, J.A. Pfaendtner, M. Menyhard, C.J. McMahon Jr: Acta Metall Mater, 1995, vol. 43, pp. 1895–1908.10.1016/0956-7151(94)00388-X ↗
15. C.A. Hippsley, J.F. Knott, B.C. Edwards: Acta Metall, 1982, vol. 30, pp. 641–54.10.1016/0001-6160(82)90113-4 ↗
16. W.T. Geng, A.J. Freeman, G.B. Olson: Solid State Com, 2001, vol.119, pp. 585-590.10.1016/S0038-1098(01)00298-8 ↗
17. D.Y. Lee, E.V. Barrera, J.P. Stark, H.L. Marcus: Metall. Trans. A. 1984, vol.15, pp.1415–30.10.1007/BF02648571 ↗
18. Y.Q. Weng, C.J. McMahon Jr: Mater. Sci. Tech. 1987, vol. 3, pp. 207-216.10.1179/mst.1987.3.3.207 ↗
19. N.H. Heo, J.C. Chang, K.B. Yoo, J.K. Lee, J. Kim: Mater. Sci. Eng. A, 2011, vol. 528, pp.2678–85.10.1016/j.msea.2010.12.025 ↗
20. N.H. Heo, S.–J. Kim: Mater. Sci. Eng. A, 2012, vol. 556, pp. 533–39.10.1016/j.msea.2012.07.023 ↗
21. N.H. Heo, J.C. Chang, S.–J. Kim: Mater. Sci. Eng. A, 2013, vol. 599, pp. 665–77.10.1016/j.msea.2012.09.007 ↗
22. Y.–U. Heo, H.J. Sung, N.H. Heo, S.–J. Kim: Mater. Sci. Eng. A, 2014, vol. 599, pp. 69-80.10.1016/j.msea.2014.01.058 ↗
23. H.J. Sung, N.H. Heo, Y.–U. Heo, S.–J. Kim: ISIJ Int, 2014, vol. 54, pp. 2643-2648.10.2355/isijinternational.54.2643 ↗
24. H.J. Sung, N.H. Heo, Y.–U. Heo, S.–J. Kim: Mater. Sci. Eng. A, 2014, vol. 619, pp. 146-151.10.1016/j.msea.2014.09.078 ↗
25. M.P. Seah: Metal Phys, 1980, vol. 10, pp. 1043-1064.10.1088/0305-4608/10/6/006 ↗
26. R.D.K. Misra: Acta Mater, 1996, vol. 44, pp. 885-890.10.1016/1359-6454(95)00249-9 ↗
27. S.-H. Song, D.-D. Shen, Z.-X. Yuan, J. Liu, T.-D. Xu, L.-Q. Weng: Scripta Mater, 2003, vol. 49, pp. 473-47610.1016/S1359-6462(03)00287-2 ↗
28. S.–H. Song, J. Wu, L.–Q. Weng, T.–H. Xi: Mater. Sci. Eng. A, 2009, vol. 520, pp. 97-100.10.1016/j.msea.2009.05.024 ↗
29. T.–D. Xu: Scripta Mater, 2002, vol. 46, pp. 759-763.10.1016/S1359-6462(02)00044-1 ↗
30. T. Shinoda, T. Nakamura: Acta Metall, 1981, vol. 29, pp. 1631-1636.10.1016/0001-6160(81)90045-6 ↗
31. T. B. Massalski: Binary alloy phase diagrams, ASM International, Materials Park, OH (1990).
32. S.K. Gupta, K.A. Gingerich: J. Chem. Phys, 1981, vol. 74, pp. 3584-3590.10.1063/1.441463 ↗
33. J.A.M Simoes, J.L. Beauchamp: Chem. Rev. 1990, vol. 90, pp. 629-688.10.1021/cr00102a004 ↗
34. Y.–R. Luo: Comprehensive handbook of chemical bond energies, CRC Press, Boca Raton, USA, 2007.10.1201/9781420007282 ↗
35. H.J. Grabke: Steel Res, 1985, vol. 57, pp. 178-185.10.1002/srin.198600750 ↗
36. S. Suzuki, S. Tanii, K. Abiko, H. Kimura: Metall. Trans. A, 1987, vol. 18, pp.1109-1115.10.1007/BF02668560 ↗
37. N.H. Heo: Scripta Mater, 2004, vol. 51, pp. 339-342.10.1016/j.scriptamat.2004.03.037 ↗
38. M.P. Seah: Acta Metall, 1980, vol. 28, pp. 995-962.10.1016/0001-6160(80)90112-1 ↗